Manifold Hydraulic / Pneumatic / Outlets 3 Sides / 2 Inlets

Manifold Hydraulic / Pneumatic / Outlets 3 Sides / 2 Inlets
Hydraulic manifold blocks. G (PF) thread machining can also be specified.
  • Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

TypeMaterialSurface TreatmentMax. Operating Pressure
BMFRSSteel for General StructureTrivalent Chromate20.6 MPa ≈ 210 kgf/cm2 or less
BMFRAAluminum Alloy1 MPa ≈ 10 kgf/cm2 or less
BMFRAAClear Anodize

Specification Table

■ Selecting Method
The diameters of J and K are not changeable. When J and K are not needed, specify J0–K0. (This results in the removal of through holes. It is not possible to specify just J or just K as 0.)
[Step 1] Select the most frequently used thread diameter as basic thread diameter.

[Ordering Example] Select 4(1/2).
[Step 2] Select the ports needed to change from the basic thread diameter and the desired thread size.
[Ordering Example] D2-E2-G2-U0-V3-W3
(Ex.)
○ BMFRS4−60−4−J0−K0−D2
○ BMFRS4−60−4 −D2
× BMFRS4−60−4−J0−D2
× BMFRS4−60−4−K0−D2
Part NumberABasic Thread DiameterJKCDEFGHUVWXYZ 
BMFRS4604      D2E2  G2  U0V3W3       
G−BMFRA4302        E1F1  H1      X1Y1Z1(G Thread)
Part NumberBlock Square
A
Basic Thread Diameter Rc (PT), M (Coarse)Alternative Thread Size Selection Rc (PT), M (Coarse)Pfabdd1h
TypeNumber of CircuitsJK (0 only), CDEFGHUVWXYZ
BMFRS
BMFRA
BMFRAA

(Standard
Change: 60N)
2
3
4
255 (M5)1 (1/8) 0 (No Hole)5 (M5)1 (1/8)    2016854.584.5
301 (1/8)2 (1/4) 0 (No Hole)5 (M5)1 (1/8)2 (1/4)   251554.584.5
351 (1/8)2 (1/4) 0 (No Hole)5 (M5)1 (1/8)2 (1/4)3 (3/8)  302065.59.55.5
Combination of 3 and 3 is not available at right angles.
402 (1/4)3 (3/8) 0 (No Hole)5 (M5)1 (1/8)2 (1/4)3 (3/8)4 (1/2) 40226.56.6116.5
Combination of 4 and 4 is not available at right angles.
502 (1/4)3 (3/8)4 (1/2)0 (No Hole)5 (M5)1 (1/8)2 (1/4)3 (3/8)4 (1/2)6 (3/4)503088.5148.5
Combination of 6 and 6 is not available at right angles.
60N3 (3/8)4 (1/2)6 (3/4)0 (No Hole)5 (M5)1 (1/8)2 (1/4)3 (3/8)4 (1/2)6 (3/4)603088.5148.5
A=25 is applicable to BMFRA and BMFRAA only, and A=60 to BMFRS only.
For thread diameter selection, specify 0, 5, 1, 2, 3, 4 or 6 indicated before ( ).
For the purposes of improved standardization, the former A dimension 60 has been changed to "60N." The a/b dimension standard of 8 mm was formerly 10 mm. The 10-mm standard will be discontinued in September 2022.
Old: BMFRS-60- New: BMFRS-60N-

Alterations

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
BMFRA2-25-[1,​5]
BMFRA2-30-[1,​2]
BMFRA2-35-[1,​2]
BMFRA2-40-[2,​3]
BMFRA2-50-[2,​3,​4]
BMFRA3-25-[1,​5]
BMFRA3-30-[1,​2]
BMFRA3-35-[1,​2]
BMFRA3-40-[2,​3]
BMFRA3-50-[2,​3,​4]
BMFRA4-25-[1,​5]
BMFRA4-30-[1,​2]
BMFRA4-35-[1,​2]
BMFRA4-40-[2,​3]
BMFRA4-50-[2,​3,​4]
BMFRAA2-25-[1,​5]
BMFRAA2-30-[1,​2]
BMFRAA2-35-[1,​2]
BMFRAA2-40-[2,​3]
BMFRAA2-50-[2,​3,​4]
BMFRAA3-25-[1,​5]
BMFRAA3-30-[1,​2]
BMFRAA3-35-[1,​2]
BMFRAA3-40-[2,​3]
BMFRAA3-50-[2,​3,​4]
BMFRAA4-25-[1,​5]
BMFRAA4-30-[1,​2]
BMFRAA4-35-[1,​2]
BMFRAA4-40-[2,​3]
BMFRAA4-50-[2,​3,​4]
BMFRS2-30-[1,​2]
BMFRS2-35-[1,​2]
BMFRS2-40-[2,​3]
BMFRS2-50-[2,​3,​4]
BMFRS3-30-[1,​2]
BMFRS3-35-[1,​2]
BMFRS3-40-[2,​3]
BMFRS3-50-[2,​3,​4]
BMFRS4-30-[1,​2]
BMFRS4-35-[1,​2]
BMFRS4-40-[2,​3]
BMFRS4-50-[2,​3,​4]
G-BMFRA2-25-[1,​5]
G-BMFRA2-30-[1,​2]
G-BMFRA2-35-[1,​2]
G-BMFRA2-40-[2,​3]
G-BMFRA2-50-[2,​3,​4]
G-BMFRA3-25-[1,​5]
G-BMFRA3-30-[1,​2]
G-BMFRA3-35-[1,​2]
G-BMFRA3-40-[2,​3]
G-BMFRA3-50-[2,​3,​4]
G-BMFRA4-25-[1,​5]
G-BMFRA4-30-[1,​2]
G-BMFRA4-35-[1,​2]
G-BMFRA4-40-[2,​3]
G-BMFRA4-50-[2,​3,​4]
G-BMFRAA2-25-[1,​5]
G-BMFRAA2-30-[1,​2]
G-BMFRAA2-35-[1,​2]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Number of Circuits
(Circuits)
Block Square A
(mm)
Thread Size / Type Application Standard Thread Dia. Selection 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5) 6 (3/4)

-

1 12 Days 10EN AW-5052 Equiv.Not Provided225Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided230Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided235Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided240Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided250Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Not Provided325Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided330Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided335Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided340Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided350Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Not Provided425Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided430Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided435Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided440Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided450Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum225Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum230Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum235Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum240Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum250Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum325Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum330Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum335Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum340Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum350Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum425Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum430Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum435Standard Thread {PT, M (Coarse) Thread}Pneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum440Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum450Standard Thread {PT, M (Coarse) Thread}Pneumatic2 ~ 4

-

1 9 Days 10Steel for General StructureTrivalent Chromate230Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate235Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate240Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 3

-

1 9 Days 10Steel for General StructureTrivalent Chromate250Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 4

-

1 9 Days 10Steel for General StructureTrivalent Chromate330Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate335Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate340Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 3

-

1 9 Days 10Steel for General StructureTrivalent Chromate350Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 4

-

1 9 Days 10Steel for General StructureTrivalent Chromate430Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate435Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure1 ~ 2

-

1 9 Days 10Steel for General StructureTrivalent Chromate440Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 3

-

1 9 Days 10Steel for General StructureTrivalent Chromate450Standard Thread {PT, M (Coarse) Thread}For hydraulic / Water Pressure2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Not Provided225G (PF) ThreadPneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided230G (PF) ThreadPneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided235G (PF) ThreadPneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided240G (PF) ThreadPneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided250G (PF) ThreadPneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Not Provided325G (PF) ThreadPneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided330G (PF) ThreadPneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided335G (PF) ThreadPneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided340G (PF) ThreadPneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided350G (PF) ThreadPneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Not Provided425G (PF) ThreadPneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Not Provided430G (PF) ThreadPneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Not Provided435G (PF) ThreadPneumatic1 ~ 2

-

1 12 Days 10EN AW-5052 Equiv.Not Provided440G (PF) ThreadPneumatic2 ~ 3

-

1 12 Days 10EN AW-5052 Equiv.Not Provided450G (PF) ThreadPneumatic2 ~ 4

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum225G (PF) ThreadPneumatic1 ~ 5

-

1 12 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum230G (PF) ThreadPneumatic1 ~ 2

-

1 9 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum235G (PF) ThreadPneumatic1 ~ 2

Loading...

Basic information

Shape Lateral Through Hole, T-Shaped Hole Pitch Standard / Configurable Fixed Type

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360