Cartridge Heaters Items / Hot Plates

Cartridge Heaters Items / Hot Plates

Click on this image to zoom in.

Click on this image to zoom in.

This is a threaded heating plate. [Main body material]5052/EN 1.4305 Equiv. are available for selection.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

 
TypeMaterial
Surface Treatment Code
Material
HTPL
(No Tap)
HTPLT
(With Tap)
AEN AW-5052 Equiv.
SEN 1.4305 Equiv.

Specifications

Part Number Plate Heater Hole Sensor Hole Heater Position Sensor Position
-     -   -   -   -   
 A-B-T D
(Diameter)
-N
(Qty.)
 S
(Diameter)
-L
(Length)
 P
(Pitch)
-Y
(from Bottom)
 F
(from Left)
-G
(from Bottom)
HTPLA-200-200-30-D5-N6-S1.6-L30-P20-Y15-F100-G5
M1 Size Table
ABM1
50~10050~100M4x0.7 Depth 6
101~200M5x0.8 Depth 8
101~20050~100
101~200M6x1.0 Depth 10

M2 Size Table
DM2
5, 6M3x0.5
8~16M4x0.7
18M5x0.8
Part NumberPlateHeater Hole (Selection)Sensor Hole (Selection)Heater PositionSensor Position
TypeMaterial CodeABTD SelectionN
Number of Holes
S SelectionL
1mm Increment
PYFG
1mm Increment1mm Increment1mm Increment
HTPL

HTPLT
A

S
50~20050~20012~305

6

8

10

12

14

16

18
1~101.610~30




8~191
When N=1, P is the distance from left end.
6~254~1974~27
2.310~100
3.2
4.8
The distance from the upper, lower or side plate end faces to the heater/sensor holes and tapped hole should be 2 mm or more. 
The distance between all holes (between heater holes, between heater holes and sensor holes, or between heater/sensor holes and tapped holes) should be 2 mm or more. 
M1 tapped holes (pilot holes) may go through when the T dimension is 15 mm or less. 
It is recommended to establish the distance between heaters (P) 3 to 4 times larger than the heater diameter (D) . (If the distance between heaters is too small, the heating may accumulate in the plate and heating unevenness may occur.)
Part Number
HTPLA-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
HTPLS-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
HTPLTA-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[4-27/1]
HTPLTS-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBody Material With or w/o Tap A
(mm)
B
(mm)
Heater Hole Dia. [D]
(mm)
Heater Position (Pitch) [P]
(mm)
Heater Position [Y]
(mm)
Number of Heater Holes [N] Sensor Hole Depth [L]
(mm)
Sensor Hole Dia. [S]
(mm)
Sensor Position [F]
(mm)
Sensor Position [G]
(mm)
T
(mm)
1 9 Days 10EN AW-5052 Equiv.No Tapped Holes50 ~ 20050 ~ 2005 ~ 188 ~ 1915 ~ 251 ~ 1010 ~ 1001.6 ~ 4.83 ~ 1973 ~ 2712 ~ 30
1 9 Days 10EN 1.4305 Equiv.No Tapped Holes50 ~ 20050 ~ 2005 ~ 188 ~ 1915 ~ 251 ~ 1010 ~ 1001.6 ~ 4.83 ~ 1973 ~ 2712 ~ 30
1 9 Days 10EN AW-5052 Equiv.With Tapped Hole50 ~ 20050 ~ 2005 ~ 188 ~ 1915 ~ 251 ~ 1010 ~ 1001.6 ~ 4.83 ~ 1974 ~ 2712 ~ 30
1 9 Days 10EN 1.4305 Equiv.With Tapped Hole50 ~ 20050 ~ 2005 ~ 188 ~ 1915 ~ 251 ~ 1010 ~ 1001.6 ~ 4.83 ~ 1973 ~ 2712 ~ 30

Loading...

  1. 1

Example of Use

Cartridge Heaters Items/Hot Plates:Related Image

Basic information

Category Mounting Components Plate Type Hot Plates

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360