Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material | Surface Treatment | Accessory | ||||
| Straight Type | Spiral Type | ||||||
| Straight Bore | Straight Bore + Tap | Keyway + Tap | Straight Bore + Tap | Keyway + Tap | |||
| KGEASH | KGEAST | KGEASK | KGEAPT | KGEAPK | EN 1.1191 Equiv. | - | Set Screw (EN 1.7220 Equiv., Black Oxide) |
| KGEASHB | KGEASTB | KGEASKB | KGEAPTB | KGEAPKB | Black Oxide | ||
| KGEASHG | KGEASTG | KGEASKG | KGEAPTG | KGEAPKG | Electroless Nickel Plating | ||
| KGHS | KGTS | KGKS | - | - | EN 1.4301 Equiv. | - | Set Screw (EN 1.4301 Equiv.) |
Specifications
| Part Number | - | Nominal (Number of Teeth, Mating Gear) | - | Shaft Bore Dia. PH7 | - | Twisting Direction |
| KGEASH1.0 KGEAPTG1.5 | - - | 2020 3618 | - - | 6 10 | - | R |
■Straight Type
Sizes marked with * are only applicable to EN 1.1191 Equiv. Sizes in ( ) are for Stainless Steel 304. Module 1.0 is not available for KGHS (Straight Bore Type of EN 1.4301 Equiv.).
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
The set screw sizes are respectively M4x3, M5x4, and M6x5.
■Spiral Type (Spiral Angle 35°)
Use Spiral Type in L and R sets.
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
| Part Number | Nominal | Shaft Bore Dia. PH7 (1mm Increment) | Number of Teeth | R (Gear Ratio) | Mating Gear Number | B | H | d | D | S | E | L | G | ℓ1 | ℓ2 | L1 | A° | M (Coarse) | ||
| Type | Module | Straight Bore Straight Bore + Tap | Keyway + Tap | |||||||||||||||||
| Straight Bore KGEASH KGEASHB KGEASHG KGHS Straight Bore + Tap KGEAST KGEASTB KGEASTG KGTS Keyway + Tap KGEASK KGEASKB KGEASKG KGKS | 1.0 | 2020 | 6, 8 | 8 | 20 | 1:1 | 2020 | 4.3 | 16 | 20 | 21.41 | 11.8 | 21 | 14.53 | 11.71 | 9 | 4.5 | 13 | 49°3' | M4 |
| 2525 | 6, 8, 10 | 8, 10 | 25 | 2525 | 5.3 | 20 | 25 | 26.41 | 15 | 23 | 14.7 | 11.21 | 8 | 4 | 13 | 48°51' | M4 | |||
| 3030 | 8, 10, 12 | 8, 10, 12 | 30 | 3030 | 6.2 | 22 | 30 | 31.41 | 19.4 | 26 | 15.89 | 11.71 | 8.9 | 4.5 | 14.5 | 47°42' | M4 (M5) | |||
| 2040 | 6, 8 | 8 | 20 | 1:2 | 4020 | 5.7 | 16 | 20 | 21.79 | 12.1 | 29.6 | 15.03 | 10.05 | 8.6 | 4 | 14 | 29°8' | M4 | ||
| 4020 | 8, 10, 12 | 8, 10, 12 | 40 | 2040 | 5.7 | 25 | 40 | 40.89 | 28.4 | 21.8 | 15.02 | 12.69 | 8 | 4 | 13 | 66°0' | M4 (M5) | |||
| 1.5 | 2020 | 10, 12 | 10, 12 | 20 | 1:1 | 2020 | 6.8 | 24 | 30 | 32.12 | 17.7 | 28 | 18.53 | 14.06 | 10 | 5 | 16.5 | 49°3' | M4 | |
| 2525 | 10~14 | 10~14 | 25 | 2525 | 7.5 | 30 | 37.5 | 39.62 | 23.7 | 34 | 21.26 | 16.31 | 11.5 | 5 | 19 | 48°51' | M4 | |||
| 3030 | 12~16 | 12~16 | 30 | 3030 | 9.3 | 33 | 45 | 47.12 | 29.6 | 38 | 22.83 | 16.56 | 12.34 | 6 | 21 | 47°42' | M5 | |||
| 1836 | 8, 10, 12 | 8 | 18 | 1:2 | 3618 | 9.8 | 22 | 27 | 29.68 | 12.2 (12.1) | 40.74 | 22.96 | 14.41 | 12.5 | 6 | 21 | 29°25' | M4 | ||
| 3618 | 10~15 | 10~15 | 36 | 1836 | 9.8 | 30 | 54 | 55.34 | 34.3 | 26.75 | 18.54 | 14.59 | 10 | 5 | 15.5 | 66°17' | M5 | |||
| 2.0 | 2020 | 12~14 | 12~14 | 20 | 1:1 | 2020 | 8.5 | 34 | 40 | 41.32 | 23.9 | 37 | 24 | 18.41 | 14 | 7 | 21 | 49°3' | M5 | |
| *2525 | 25 | 2525 | 10.5 | 42 | 50 | 51.33 | 32.3 | 40 | 23.34 | 16.41 | 10.99 | 5 | 21 | 48°51' | M5 | |||||
| 3030 | 16~18 | 16~18 | 30 | 3030 | 12.4 | 44 | 60 | 61.36 | 38.9 | 51 | 30.77 | 22.41 | 16.79 | 8 | 28 | 47°42' | M6 | |||
| 1836 | 10 | 10 | 18 | 1:2 | 3618 | 12.6 | 28 | 36 | 37.81 | 19.1 | 53.12 | 29 | 18.01 | 15.12 | 7 | 27 | 29°25' | M4 | ||
| 3618 | 12~14 | 12~14 | 36 | 1836 | 12.6 | 36 | 72 | 72.15 | 47.6 | 35.21 | 24.07 | 19 | 13 | 6.5 | 21 | 66°17' | M5 | |||
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
The set screw sizes are respectively M4x3, M5x4, and M6x5.
■Spiral Type (Spiral Angle 35°)
| Part Number | Nominal | Shaft Bore Dia. PH7 (1mm Increment) | Twisting Direction | Number of Teeth | R (Gear Ratio) | Mating Gear Number | B | H | d | D | S | E | L | G | ℓ1 | ℓ2 | L1 | A° | M (Coarse) | ||
| Type | Module | Straight Bore + Tap | Keyway + Tap | ||||||||||||||||||
| Straight Bore + Tap KGEAPT KGEAPTB KGEAPTG Keyway + Tap KGEAPK KGEAPKB KGEAPKG | 1.0 | 2020 | 6, 8 | 8 | L R | 20 | 1:1 | 2020 | 4.5 | 16 | 20 | 21.12 | 11.3 | 21 | 14.43 | 11.56 | 9 | 4.5 | 13 | 50°31' | M4 |
| 3030 | 10, 12 | 10, 12 | (Left) (Right) | 30 | 3030 | 6.2 | 22 | 30 | 31.09 | 19.4 | 26 | 15.67 | 11.54 | 9 | 4.5 | 14.5 | 48°21' | M5 | |||
| 2040 | 8, 10, 12 | 8 | L (Left) | 20 | 1:2 | 4020 | 5.7 | 16 | 20 | 21.87 | 12.1 | 29.6 | 15 | 10.07 | 8.6 | 4 | 14 | 30°13' | M4 | ||
| 4020 | 10, 12 | 10, 12 | R (Right) | 40 | 2040 | 5.7 | 25 | 40 | 40.41 | 28.4 | 21.8 | 14.57 | 12.21 | 8 | 4 | 13 | 65°36' | M5 | |||
| 1.5 | 2020 | 10, 12 | 10, 12 | L R | 20 | 1:1 | 2020 | 7 | 24 | 30 | 31.85 | 17.2 | 28 | 18.44 | 13.93 | 10 | 5 | 16.5 | 50°5' | M4 | |
| 3030 | 12~16 | 12~16 | (Left) (Right) | 30 | 3030 | 9.3 | 33 | 45 | 46.79 | 29.7 | 38 | 22.64 | 16.4 | 12 | 6 | 21 | 47°54' | M5 | |||
| 1836 | 8, 10, 12 | 8 | L (Left) | 18 | 1:2 | 3618 | 9.8 | 22 | 27 | 30.09 | 12.2 | 40.74 | 22.96 | 14.51 | 12.49 | 6 | 21 | 30°44' | M4 | ||
| 3618 | 10~15 | 10~15 | R (Right) | 36 | 1836 | 9.8 | 30 | 54 | 54.76 | 34.3 | 26.75 | 18.01 | 14.01 | 9 | 4.5 | 15.5 | 65°57' | M5 | |||
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | RoHS | Module | Shape | Number of Teeth (Teeth) | Reduction Ratio | Material | Tooth Width B (mm) | Surface Treatment | Shaft Bore Dia. P (Ø) | Shaft Hole Specifications | Nominal | Twisting Direction | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 10 Days | 10 | 1.5 | Straight Type | 18 | 2 | Stainless Steel | 9.8 | Not Provided | 8 ～ 12 | Round Hole | 1836 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 20 | 1 | Stainless Steel | 6.8 | Not Provided | 10 ～ 12 | Round Hole | 2020 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 10 ～ 14 | Round Hole | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 30 | 1 | Stainless Steel | 9.3 | Not Provided | 12 ～ 16 | Round Hole | 3030 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 10 ～ 15 | Round Hole | 3618 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 18 | 2 | Stainless Steel | 12.6 | Not Provided | 10 | Round Hole | 1836 | - | ||
| 1 | 10 Days | 10 | 2 | - | 20 | 1 | Stainless Steel | 8.5 | Not Provided | 12 ～ 14 | Round Hole | 2020 | - | ||
| 1 | 10 Days | 10 | 2 | - | 30 | 1 | Stainless Steel | 12.4 | Not Provided | 16 ～ 18 | Round Hole | 3030 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 36 | 2 | Stainless Steel | 12.6 | Not Provided | 12 ～ 14 | Round Hole | 3618 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 20 | 2 | Stainless Steel | 5.7 | Not Provided | 8 | Keyway + Tap | 2040 | - | ||
| 1 | 10 Days | 10 | 1 | - | 25 | 1 | Stainless Steel | 5.3 | Not Provided | 8 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1 | - | 25 | 1 | Stainless Steel | 5.3 | Not Provided | 10 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1 | - | 25 | 1 | Stainless Steel | 5.3 | Not Provided | 10 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1 | - | 30 | 1 | Stainless Steel | 6.2 | Not Provided | 8 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1 | - | 30 | 1 | Stainless Steel | 6.2 | Not Provided | 10 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1 | - | 30 | 1 | Stainless Steel | 6.2 | Not Provided | 10 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1 | - | 30 | 1 | Stainless Steel | 6.2 | Not Provided | 12 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 40 | 2 | Stainless Steel | 5.7 | Not Provided | 8 | Keyway + Tap | 4020 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 40 | 2 | Stainless Steel | 5.7 | Not Provided | 10 | Keyway + Tap | 4020 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 40 | 2 | Stainless Steel | 5.7 | Not Provided | 10 | Keyway + Tap | 4020 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 40 | 2 | Stainless Steel | 5.7 | Not Provided | 12 | Keyway + Tap | 4020 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 18 | 2 | Stainless Steel | 9.8 | Not Provided | 8 | Keyway + Tap | 1836 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 20 | 1 | Stainless Steel | 6.8 | Not Provided | 10 | Keyway + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 20 | 1 | Stainless Steel | 6.8 | Not Provided | 10 | Keyway + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 20 | 1 | Stainless Steel | 6.8 | Not Provided | 12 | Keyway + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 10 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 10 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 11 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 12 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 13 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 14 | Keyway + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 30 | 1 | Stainless Steel | 9.3 | Not Provided | 12 ～ 16 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 10 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 10 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 11 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 12 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 13 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 14 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 15 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 18 | 2 | Stainless Steel | 12.6 | Not Provided | 10 | Keyway + Tap | 1836 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 18 | 2 | Stainless Steel | 12.6 | Not Provided | 10 | Keyway + Tap | 1836 | - | ||
| 1 | 10 Days | 10 | 2 | - | 20 | 1 | Stainless Steel | 8.5 | Not Provided | 12 ～ 14 | Keyway + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 2 | - | 30 | 1 | Stainless Steel | 12.4 | Not Provided | 16 ～ 18 | Keyway + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 36 | 2 | Stainless Steel | 12.6 | Not Provided | 12 ～ 14 | Keyway + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 20 | 2 | Stainless Steel | 5.7 | Not Provided | 6 ～ 8 | Round Hole + Tap | 2040 | - | ||
| 1 | 10 Days | 10 | 1 | - | 25 | 1 | Stainless Steel | 5.3 | Not Provided | 6 ～ 10 | Round Hole + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1 | - | 30 | 1 | Stainless Steel | 6.2 | Not Provided | 8 ～ 12 | Round Hole + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1 | Straight Type | 40 | 2 | Stainless Steel | 5.7 | Not Provided | 8 ～ 12 | Round Hole + Tap | 4020 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 18 | 2 | Stainless Steel | 9.8 | Not Provided | 8 ～ 12 | Round Hole + Tap | 1836 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 20 | 1 | Stainless Steel | 6.8 | Not Provided | 10 ～ 12 | Round Hole + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 25 | 1 | Stainless Steel | 7.5 | Not Provided | 10 ～ 14 | Round Hole + Tap | 2525 | - | ||
| 1 | 10 Days | 10 | 1.5 | - | 30 | 1 | Stainless Steel | 9.3 | Not Provided | 12 ～ 16 | Round Hole + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 1.5 | Straight Type | 36 | 2 | Stainless Steel | 9.8 | Not Provided | 10 ～ 15 | Round Hole + Tap | 3618 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 18 | 2 | Stainless Steel | 12.6 | Not Provided | 10 | Round Hole + Tap | 1836 | - | ||
| 1 | 10 Days | 10 | 2 | - | 20 | 1 | Stainless Steel | 8.5 | Not Provided | 12 ～ 14 | Round Hole + Tap | 2020 | - | ||
| 1 | 10 Days | 10 | 2 | - | 30 | 1 | Stainless Steel | 12.4 | Not Provided | 16 ～ 18 | Round Hole + Tap | 3030 | - | ||
| 1 | 10 Days | 10 | 2 | Straight Type | 36 | 2 | Stainless Steel | 12.6 | Not Provided | 12 ～ 14 | Round Hole + Tap | 3618 | - |
Loading...
Basic information
| Heat Treatment | Not Provided | Ground Tooth | Not Provided | Precision(* New JIS) | Grade 4 |
|---|---|---|---|---|---|
| Shaft Bore Tolerance | H7 |
Configure
Basic Attributes
-
Module
-
Shape
-
Straight Type -
Spiral Type
-
-
Number of Teeth(Teeth)
-
Reduction Ratio
-
Tooth Width B(mm)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Shaft Bore Dia. P(Ø)
-
Shaft Hole Specifications
- Keyway + Tap
- Round Hole
- Round Hole + Tap
-
Nominal
- 1836
- 2020
- 2040
- 2525
- 3030
- 3618
- 4020
-
Twisting Direction
- Left [L]
- Right [R]
-
Type
- KGEAPK
- KGEAPKB
- KGEAPKG
- KGEAPT
- KGEAPTB
- KGEAPTG
- KGEASH
- KGEASHB
- KGEASHG
- KGEASK
- KGEASKB
- KGEASKG
- KGEAST
- KGEASTB
- KGEASTG
- KGHS
- KGKS
- KGTS
-
Material
- General Steel Material
- Stainless Steel
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Cantilever Shafts / shouldered / external thread, ring groove / spanner flat
MISUMI Shipping Days: 3 Days
-
Bearing housings / compact flange / through holes / circlip / deep groove ball bearing / steel, stainless steel / black oxide, nickel plated
MISUMI Standard Price : 19.64 € Shipping Days: Same day
-
Slit couplings / grub screw clamping / cross slot / body: aluminium, stainless steel
MISUMI Shipping Days: 7 Days
-
Hex Socket Set Screws / Shaped End similar DIN 913 / similar DIN 914
MISUMI Standard Price : 0.89 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.