• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type

Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Bevel Gears/Pressure Angle 20Deg./Straight/Spiral Type:Related Image

TypeMaterialSurface TreatmentAccessory
Straight TypeSpiral Type
Straight Bore Straight Bore + TapKeyway + TapStraight Bore + TapKeyway + Tap
KGEASHKGEASTKGEASKKGEAPTKGEAPKEN 1.1191 Equiv.-Set Screw
(EN 1.7220 Equiv., Black Oxide)
KGEASHBKGEASTBKGEASKBKGEAPTBKGEAPKBBlack Oxide
KGEASHGKGEASTGKGEASKGKGEAPTGKGEAPKGElectroless Nickel Plating
KGHSKGTSKGKS--EN 1.4301 Equiv.-Set Screw (EN 1.4301 Equiv.)
Set Screw is not included in Un-tapped Type products.

Specifications

Part Number-Nominal
(Number of Teeth, Mating Gear)		-Shaft Bore Dia. PH7-Twisting Direction
KGEASH1.0
KGEAPTG1.5		-
-		2020
3618		-
-		6
10
-
R
■Straight Type
Part NumberNominalShaft Bore Dia. PH7 (1mm Increment)Number of TeethR
(Gear Ratio)		Mating Gear NumberBHdDSELGℓ1ℓ2L1A°M (Coarse)
TypeModuleStraight Bore Straight Bore + TapKeyway
+ Tap
Straight Bore
KGEASH
KGEASHB
KGEASHG
KGHS
Straight Bore + Tap
KGEAST
KGEASTB
KGEASTG
KGTS
Keyway + Tap
KGEASK
KGEASKB
KGEASKG
KGKS		1.020206, 88201:120204.3162021.4111.82114.5311.7194.51349°3'M4
25256, 8, 108, 102525255.3202526.41152314.711.21841348°51'M4
30308, 10, 128, 10, 123030306.2223031.4119.42615.8911.718.94.514.547°42'M4 (M5)
20406, 88201:240205.7162021.7912.129.615.0310.058.641429°8'M4
40208, 10, 128, 10, 124020405.7254040.8928.421.815.0212.69841366°0'M4 (M5)
1.5202010, 1210, 12201:120206.8243032.1217.72818.5314.0610516.549°3'M4
252510~1410~142525257.53037.539.6223.73421.2616.3111.551948°51'M4
303012~1612~163030309.3334547.1229.63822.8316.5612.3462147°42'M5
18368, 10, 128181:236189.8222729.6812.2 (12.1)40.7422.9614.4112.562129°25'M4
361810~1510~153618369.8305455.3434.326.7518.5414.5910515.566°17'M5
2.0202012~1412~14201:120208.5344041.3223.9372418.411472149°3'M5
*252525252510.5425051.3332.34023.3416.4110.9952148°51'M5
303016~1816~1830303012.4446061.3638.95130.7722.4116.7982847°42'M6
18361010181:2361812.6283637.8119.153.122918.0115.1272729°25'M4
361812~1412~1436183612.6367272.1547.635.2124.0719136.52166°17'M5
Sizes marked with * are only applicable to EN 1.1191 Equiv. Sizes in ( ) are for Stainless Steel 304. Module 1.0 is not available for KGHS (Straight Bore Type of EN 1.4301 Equiv.).
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
The set screw sizes are respectively M4x3, M5x4, and M6x5.

■Spiral Type (Spiral Angle 35°)
Part NumberNominalShaft Bore Dia. PH7 (1mm Increment)Twisting DirectionNumber of TeethR
(Gear Ratio)		Mating Gear NumberBHdDSELGℓ1ℓ2L1A°M (Coarse)
TypeModuleStraight Bore + TapKeyway + Tap
Straight Bore + Tap
KGEAPT
KGEAPTB
KGEAPTG
Keyway + Tap
KGEAPK
KGEAPKB
KGEAPKG		1.020206, 88L   R201:120204.5162021.1211.32114.4311.5694.51350°31'M4
303010, 1210, 12(Left) (Right)3030306.2223031.0919.42615.6711.5494.514.548°21'M5
20408, 10, 128L (Left)201:240205.7162021.8712.129.61510.078.641430°13'M4
402010, 1210, 12R (Right)4020405.7254040.4128.421.814.5712.21841365°36'M5
1.5202010, 1210, 12L   R201:120207243031.8517.22818.4413.9310516.550°5'M4
303012~1612~16(Left) (Right)3030309.3334546.7929.73822.6416.41262147°54'M5
18368, 10, 128L (Left)181:236189.8222730.0912.240.7422.9614.5112.4962130°44'M4
361810~1510~15R (Right)3618369.8305454.7634.326.7518.0114.0194.515.565°57'M5
Use Spiral Type in L and R sets.
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498

Alterations

Bevel Gears/Pressure Angle 20Deg./Straight/Spiral Type:Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KGEAPK1.0-2020-8-[L,​R]
KGEAPK1.0-2040-8-L
KGEAPK1.0-3030-10K-[L,​R]
KGEAPK1.0-3030-[10,​12]-[L,​R]
KGEAPK1.0-4020-10-R
KGEAPK1.0-4020-10K-R
KGEAPK1.0-4020-12-R
KGEAPK1.5-1836-8-L
KGEAPK1.5-2020-10-[L,​R]
KGEAPK1.5-2020-10K-[L,​R]
KGEAPK1.5-2020-12-[L,​R]
KGEAPK1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPK1.5-3618-10K-R
KGEAPK1.5-3618-[10-15/1]-R
KGEAPKB1.0-2020-8-[L,​R]
KGEAPKB1.0-2040-8-L
KGEAPKB1.0-3030-10K-[L,​R]
KGEAPKB1.0-3030-[10,​12]-[L,​R]
KGEAPKB1.0-4020-10-R
KGEAPKB1.0-4020-10K-R
KGEAPKB1.0-4020-12-R
KGEAPKB1.5-1836-8-L
KGEAPKB1.5-2020-10-[L,​R]
KGEAPKB1.5-2020-10K-[L,​R]
KGEAPKB1.5-2020-12-[L,​R]
KGEAPKB1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPKB1.5-3618-10K-R
KGEAPKB1.5-3618-[10-15/1]-R
KGEAPKG1.0-2020-8-[L,​R]
KGEAPKG1.0-2040-8-L
KGEAPKG1.0-3030-10K-[L,​R]
KGEAPKG1.0-3030-[10,​12]-[L,​R]
KGEAPKG1.0-4020-10-R
KGEAPKG1.0-4020-10K-R
KGEAPKG1.0-4020-12-R
KGEAPKG1.5-1836-[8,​10,​12]-L
KGEAPKG1.5-2020-10-[L,​R]
KGEAPKG1.5-2020-10K-[L,​R]
KGEAPKG1.5-2020-12-[L,​R]
KGEAPKG1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPKG1.5-3618-10-R
KGEAPKG1.5-3618-10K-R
KGEAPKG1.5-3618-11-R
KGEAPKG1.5-3618-12-R
KGEAPKG1.5-3618-13-R
KGEAPKG1.5-3618-14-R
KGEAPKG1.5-3618-15-R
KGEAPT1.0-2020-[6,​8]-[L,​R]
KGEAPT1.0-2040-[8,​10,​12]-L
KGEAPT1.0-3030-[10,​12]-[L,​R]
KGEAPT1.0-4020-[10,​12]-R
KGEAPT1.5-1836-[8,​10,​12]-L
KGEAPT1.5-2020-[10,​12]-[L,​R]
KGEAPT1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPT1.5-3618-[10-15/1]-R
KGEAPTB1.0-2020-[6,​8]-[L,​R]
KGEAPTB1.0-2040-[8,​10,​12]-L
KGEAPTB1.0-3030-[10,​12]-[L,​R]
KGEAPTB1.0-4020-[10,​12]-R
KGEAPTB1.5-1836-[8,​10,​12]-L
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSModule Shape Number of Teeth
(Teeth) 		Reduction Ratio Material Tooth Width B
(mm) 		Surface Treatment Shaft Bore Dia. P
(Ø) 		Shaft Hole Specifications Nominal Twisting Direction

-

1 10 Days 101-201General Steel Material4.5Not Provided8Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101Spiral Type202General Steel Material5.7Not Provided8Keyway + Tap2040Left [L]

-

1 10 Days 101-301General Steel Material6.2Not Provided10Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101-301General Steel Material6.2Not Provided10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Not Provided10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Not Provided10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Not Provided12Keyway + Tap4020Right [R]

-

1 10 Days 101.5Spiral Type182General Steel Material9.8Not Provided8Keyway + Tap1836Left [L]

-

1 10 Days 101.5-201General Steel Material7Not Provided10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Not Provided10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Not Provided12Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-301General Steel Material9.3Not Provided12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Not Provided10Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Not Provided10 ～ 15Keyway + Tap3618Right [R]

-

1 10 Days 101-201General Steel Material4.5Black Oxide8Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101Spiral Type202General Steel Material5.7Black Oxide8Keyway + Tap2040Left [L]

-

1 10 Days 101-301General Steel Material6.2Black Oxide10Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101-301General Steel Material6.2Black Oxide10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Black Oxide10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Black Oxide10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Black Oxide12Keyway + Tap4020Right [R]

-

1 10 Days 101.5Spiral Type182General Steel Material9.8Black Oxide8Keyway + Tap1836Left [L]

-

1 10 Days 101.5-201General Steel Material7Black Oxide10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Black Oxide10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Black Oxide12Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-301General Steel Material9.3Black Oxide12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Black Oxide10Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Black Oxide10 ～ 15Keyway + Tap3618Right [R]

-

1 10 Days 101-201General Steel Material4.5Electroless Nickel Plating8Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101Spiral Type202General Steel Material5.7Electroless Nickel Plating8Keyway + Tap2040Left [L]

-

1 10 Days 101-301General Steel Material6.2Electroless Nickel Plating10Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101-301General Steel Material6.2Electroless Nickel Plating10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating10Keyway + Tap4020Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating12Keyway + Tap4020Right [R]

-

1 10 Days 101.5Spiral Type182General Steel Material9.8Electroless Nickel Plating8 ～ 12Keyway + Tap1836Left [L]

-

1 10 Days 101.5-201General Steel Material7Electroless Nickel Plating10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Electroless Nickel Plating10Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-201General Steel Material7Electroless Nickel Plating12Keyway + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-301General Steel Material9.3Electroless Nickel Plating12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating10Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating10Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating11Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating12Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating13Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating14Keyway + Tap3618Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating15Keyway + Tap3618Right [R]

-

1 10 Days 101-201General Steel Material4.5Not Provided6 ～ 8Round Hole + Tap2020Left [L] / Right [R]

-

1 10 Days 101Spiral Type202General Steel Material5.7Not Provided8 ～ 12Round Hole + Tap2040Left [L]

-

1 10 Days 101-301General Steel Material6.2Not Provided10 ～ 12Round Hole + Tap3030Left [L] / Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Not Provided10 ～ 12Round Hole + Tap4020Right [R]

-

1 10 Days 101.5Spiral Type182General Steel Material9.8Not Provided8 ～ 12Round Hole + Tap1836Left [L]

-

1 10 Days 101.5-201General Steel Material7Not Provided10 ～ 12Round Hole + Tap2020Left [L] / Right [R]

-

1 10 Days 101.5-301General Steel Material9.3Not Provided12 ～ 16Round Hole + Tap3030Left [L] / Right [R]

-

1 10 Days 101.5Spiral Type362General Steel Material9.8Not Provided10 ～ 15Round Hole + Tap3618Right [R]

-

1 10 Days 101-201General Steel Material4.5Black Oxide6 ～ 8Round Hole + Tap2020Left [L] / Right [R]

-

1 10 Days 101Spiral Type202General Steel Material5.7Black Oxide8 ～ 12Round Hole + Tap2040Left [L]

-

1 10 Days 101-301General Steel Material6.2Black Oxide10 ～ 12Round Hole + Tap3030Left [L] / Right [R]

-

1 10 Days 101Spiral Type402General Steel Material5.7Black Oxide10 ～ 12Round Hole + Tap4020Right [R]

-

1 10 Days 101.5Spiral Type182General Steel Material9.8Black Oxide8 ～ 12Round Hole + Tap1836Left [L]

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Heat Treatment Not Provided Ground Tooth Not Provided Precision(* New JIS) Grade 4
Shaft Bore Tolerance H7

Configure

Clear all

313Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Module

    • 1
    • 1.5
    • 2

    Clear

  • Shape

    • Straight Type
    • Spiral Type

    Clear

  • Number of Teeth(Teeth)

    • 18
    • 20
    • 25
    • 30
    • 36
    • 40

    Clear

  • Reduction Ratio

    • 1
    • 2

    Clear

  • Material

    • General Steel Material
    • Stainless Steel

    Clear

  • Tooth Width B(mm)

    • 4.3
    • 4.5
    • 5.3
    • 5.7
    • 6.2
    • 6.8
    • 7
    • 7.5
    • 8.5
    • 9.3
    • 9.8
    • 10.5
    • 12.4
    • 12.6

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating

    Clear

  • Shaft Bore Dia. P(Ø)

    • 6
    • 8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18

     [10-18/1Ø Unit(s)]

    Clear

  • Shaft Hole Specifications

    • Keyway + Tap
    • Round Hole
    • Round Hole + Tap

    Clear

  • Nominal

    • 1836
    • 2020
    • 2040
    • 2525
    • 3030
    • 3618
    • 4020

    Clear

  • Twisting Direction

    • Left [L]
    • Right [R]

    Clear

  • Type

    • KGEAPK
    • KGEAPKB
    • KGEAPKG
    • KGEAPT
    • KGEAPTB
    • KGEAPTG
    • KGEASH
    • KGEASHB
    • KGEASHG
    • KGEASK
    • KGEASKB
    • KGEASKG
    • KGEAST
    • KGEASTB
    • KGEASTG
    • KGHS
    • KGKS
    • KGTS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 10 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.