Heat Insulating Plates / High Temperature Insulating Grade / With / Without Holes

Heat Insulating Plates / High Temperature Insulating Grade / With / Without Holes

Click on this image to zoom in.

Click on this image to zoom in.

  • Heat Insulating Plates / High Temperature Insulating Grade / With / Without Holes
  • Heat Insulating Plates / High Temperature Insulating Grade / With / Without Holes
[Features] These are low-profile insulating sheets with a thickness of 1 to 2 mm. [Features] Heat resistance, high strength, high temperature resistance.
  • Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Heat Insulating Plates/High Temperature Insulating Grade/With/Without Holes:Related Image
TypeGradeColorOperating Ambient Temperature
HIPYKHHigh StrengthBrownRoom Temp. ~ 180°C
HIPLKHHigh Temp. ResistantWhite-80°C ~ 400°C
HIPSKHThin, Heat ResistantGrayRoom Temp. ~ 800°C

Specifications

■Standard
Part Number-A-B-T
HIPYKH-300-200-1
■With Holes
Part Number-A-B-T-F-G-Bolt Nominal Dia.
HIPLKH2H-300-200-2-F50-G50-N4
■Standard
Part Number1mm IncrementSelection T
TypeAB
HIPYKH
HIPLKH
20~50020~5001
2
HIPSKH1.5
2

■With Holes
Part Number1mm IncrementSelection T0.5mm IncrementBolt Hole Nominal Dia. Selection
TypeNumber of HolesABFGN (Through Hole)
HIPYKH
HIPLKH
2H
4H
6H
20~50020~5001
2
9~491
(2H, 4H Type)
9~245
(6H Type)
5~495
(2H Type)
9~491
(4H, 6H Type)
3
4
5
6
8
10
HIPSKH1.5
2
F Dimension Range: For 2H and 4H, d+5≤F≤A-d-5; for 6H, d+5≤F≤A/2-d/2-2.5.
G Dimension Range: For 2H, d/2+2.5≤G≤B-d/2-2.5; for 4H and 6H, d+5≤G≤B-d-5.

■Precision Standards
• T Dimension Tolerance
(HIPYKH, HIPLKH)
T1.02.0
±0.15±0.25
(HIPSKH)
T:±0.20
■Characteristics of HIPSKH
Overview: Inorganic mineral, Fiber, Filler and Binding Agent are main materials. Dried after paper making formation.
ItemUnitCharacteristic Value
Densitykg/m3900
Tensile StrengthN/mm22.45
Compression Rate (6.86MPa)%20
Recovery Rate (6.86MPa)%35
Thermal ConductivityW/(m • K)0.11
{cal/cm • sec • °C}{0.26x10-3}
Handle with care as the material is fragile. The above values are references only.
Characteristics of HIPYKH and HIPLKH >>P.1675

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
HIPYKH2H-[20-500/1]-[20-500/1]-[1,​2]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH4H-[20-500/1]-[20-500/1]-[1,​2]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH6H-[20-500/1]-[20-500/1]-[1,​2]-[9-245/0.5]-[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH6H-[20-500/1]-[20-500/1]-[1,​2]-[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH6H-[20-500/1]-[20-500/1]-[1,​2]-F[9-245/0.5]-[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH6H-[20-500/1]-[20-500/1]-[1,​2]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
HIPYKH-[20-500/1]-[20-500/1]-[1,​2]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSRecommended Operating Temperature
(℃)
Application Plate Thickness T
(mm)
Width B
(mm)
Length A
(mm)
Type F
(mm)
G
(mm)
Screw Nominal Dia. [N]
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5002H (Two Holes)9 ~ 4915 ~ 4953 ~ 10
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5004H (Four Holes)9 ~ 4919 ~ 4913 ~ 10
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5006H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5006H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5006H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 7 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 5006H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 6 Days 10Room Temp. to 180High Strength1 ~ 220 ~ 50020 ~ 500No Drilling Alteration---

Loading...

  1. 1

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360