• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Plates / PUR / Ether, Ester / A50, A70, A90, A95 / through holes, counter bores (Part Numbers - CAD Download)

Plates / PUR / Ether, Ester / A50, A70, A90, A95 / through holes, counter bores
View the FAQ (5)

MISUMI

MISUMI

Data sheet

Unit еxample related to this product
Grip and Rotate Feed Mechanism
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Antistatic/Low Rebound Urethane Sheets/Standard Sizes:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

 
A, B Configurable TypeMaterialHardnessColor
No Adhesive
UTSHNEAntistatic Urethane
(Ether Polyurethane)		Shore A90Gray
UTSMEAntistatic Urethane
(Ester Polyurethane)		Shore A70
UTSLEShore A50
LUTNLow Rebound Urethane
(Ester Polyurethane)		Shore A70
Properties of Low Rebound Urethane Here

■Characteristic Values of Antistatic Urethane
Specific Volume Resistivity2.1x108Ω • cm
Surface Resistivity4.0x109Ω
(Conditions: Temperature 30°C Humidity 60%)
All other properties are equal to those of urethane of the same hardness.

■Accuracy Standards
T Tolerance
TTolerance
1~4±0.3
5~10±0.4
15~30±0.5

A, B Tolerance
A, BTolerance
200 or Less±0.5
201~300±1.0
301~400±1.2
401~500±1.5

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

■A, B Configurable Type
Part Number-A-B-F-G-Screw Nominal Dia.
UTSHNE8
UTSHNE4H8		-
-		300
200		-
-		200
150
-
F140
-
G120
-
N5
 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)


Antistatic/Low Rebound Urethane Sheets/Standard Sizes:Related Image

General Information - Panels (polyurethane rubber, rubber, foam, felt)

 

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

 

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

 

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. << Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>
Part Number
UTSHNE4H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z3
UTSHNE4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z[3,​4]
UTSHNE4H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8]
UTSHNE4H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8]
UTSHNE4H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8,​10]
UTSHNE4H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE4H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8,​10]
UTSHNE5-[10-500/1]-[10-500/1]
UTSHNE6-[10-500/1]-[10-500/1]
UTSHNE6H1-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z3
UTSHNE6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z[3,​4]
UTSHNE6H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8]
UTSHNE6H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8]
UTSHNE6H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8,​10]
UTSHNE6H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSHNE6H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[9-491/0.5]-Z[4,​5,​6,​8,​10]
UTSHNE8-[10-500/1]-[10-500/1]
UTSHNE10-[10-500/1]-[10-500/1]
UTSHNE15-[10-500/1]-[10-500/1]
UTSHNE20-[10-500/1]-[10-500/1]
UTSHNE25-[10-500/1]-[10-500/1]
UTSHNE30-[10-500/1]-[10-500/1]
UTSLE1-[10-500/1]-[10-500/1]
UTSLE1H1-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H2-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H3-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H4-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H5-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H6-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H8-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H8-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-Z3
UTSLE1H10-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H10-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-Z[3,​4]
UTSLE1H15-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H15-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
UTSLE1H20-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H20-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
UTSLE1H25-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSLE1H25-[25-500/1]-[25-500/1]-F[5-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSGrade, Type Thickness T
(mm) 		Width A
(mm) 		Length B
(mm) 		Hardness (Shore, Asker, Penetration) Hole Machining Counterbored Hole Nominal Dia. [Z] F
(mm) 		G
(mm) 		Through Hole Nominal Dia. [N]

-

1 9 Days 10Antistatic Polyurethane225 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane325 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane425 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane525 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane625 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A904H (Four Holes)39 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A904H (Four Holes)3 ～ 49 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A904H (Four Holes)4 ～ 89 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A904H (Four Holes)4 ～ 89 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A904H (Four Holes)4 ～ 109 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane3025 ～ 50025 ～ 500Shore A904H (Four Holes)-9 ～ 4919 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane3025 ～ 50025 ～ 500Shore A904H (Four Holes)4 ～ 109 ～ 4919 ～ 491-

-

1 9 Days 10Antistatic Polyurethane510 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane610 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane125 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane225 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane325 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane425 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane525 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane625 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A906H (Six Holes)39 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A906H (Six Holes)3 ～ 49 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A906H (Six Holes)4 ～ 89 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A906H (Six Holes)4 ～ 89 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A906H (Six Holes)4 ～ 109 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane3025 ～ 50025 ～ 500Shore A906H (Six Holes)-9 ～ 2459 ～ 4913 ～ 10

-

1 9 Days 10Antistatic Polyurethane3025 ～ 50025 ～ 500Shore A906H (Six Holes)4 ～ 109 ～ 2459 ～ 491-

-

1 9 Days 10Antistatic Polyurethane810 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane1010 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane1510 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane2010 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane2510 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane3010 ～ 50010 ～ 500Shore A90No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane110 ～ 50010 ～ 500Shore A50No Drilling Alteration----

-

1 9 Days 10Antistatic Polyurethane125 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane225 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane325 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane425 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane525 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane625 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane825 ～ 50025 ～ 500Shore A501H (1-Hole)35 ～ 4915 ～ 495-

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane1025 ～ 50025 ～ 500Shore A501H (1-Hole)3 ～ 45 ～ 4915 ～ 495-

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane1525 ～ 50025 ～ 500Shore A501H (1-Hole)4 ～ 85 ～ 4915 ～ 495-

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane2025 ～ 50025 ～ 500Shore A501H (1-Hole)4 ～ 85 ～ 4915 ～ 495-

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A501H (1-Hole)-5 ～ 4915 ～ 4953 ～ 10

-

1 9 Days 10Antistatic Polyurethane2525 ～ 50025 ～ 500Shore A501H (1-Hole)4 ～ 105 ～ 4915 ～ 495-

Loading...

  1. << Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Antistatic/Low Rebound Urethane Sheets/Standard Sizes:Related Image
Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

■A, B Configurable - Standard Type
Part Number1mm Increment
TypeTAB
UTSHNE
UTSME
UTSLE
LUTN		(Antistatic, Shore A90)
(Antistatic, Shore A70)
(Antistatic, Shore A50)
(Low Rebound, Shore A70)		110~500
for LUTN
(10~250)		10~500
for LUTN
(10~250)
2
3
4
*5
6
8
*10
*15
*20
*25
*30
T Dimensions of LUTN are * marked sizes only.
A≥B≥T
■A, B Configurable - Hole Type
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia. Selection
TypeNominalTABFGN (Through
Hole)		Z (Counterbored
Hole)
UTSHNE
UTSME
UTSLE
LUTN		(Antistatic, Shore A90)
(Antistatic, Shore A70)
(Antistatic, Shore A50)
(Low Rebound, Shore A70)		1H

2H

3H

4H

6H		125~500
for LUTN
( 25~250 )		25~500
for LUTN
( 25~250 )		5~495
for LUTN
( 5~245 )
(1H Type)
9~491
for LUTN
( 9~241 )
(2H, 4H Types)
9~245
for LUTN
( 9~120 )
(3H, 6H Types)		5~495
for LUTN
( 5~245 )
(1H, 2H, 3H Types)
9~491
for LUTN
( 9~241 )
(4H, 6H Types)		3
4
5
6
8
10		-
2-
3-
4-
*5-
6-
83     
*1034    
*15 4568 
*20 4568 
*25 456810
*30 456810
T Dimensions of LUTN are * marked sizes only. A≥B≥T
Dimension F Specification Range: For 1H: d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 2H, 4H:d(d1)+5≤F≤A-d(d1)-5, for 3H, 6H: d(d1)+5≤F≤A/2-d(d1)/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d(d1)/2+2.5≤G≤B-d(d1)/2-2.5, for 4H, 6H: d(d1)+5≤G≤B-d(d1)-5. (d for through holes, d1 for counterbored holes.)

 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

Antistatic/Low Rebound Urethane Sheets/Standard Sizes:Related Image
 

Basic information

Material Urethane With or w/o Adhesive No Adhesive

Configure

Clear all

367Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Grade, Type

    • Antistatic Polyurethane
    • Low Rebound Urethane
      • Low Rebound Urethane

    Clear

  • Thickness T(mm)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 15
    • 20
    • 25
    • 30

    Clear

  • Width A(mm)

     [10-500/1mm Unit(s)]

    Clear

  • Length B(mm)

     [10-500/1mm Unit(s)]

    Clear

  • Hardness (Shore, Asker, Penetration)

    • Shore A50
    • Shore A70
    • Shore A90

    Clear

  • Hole Machining

    • 1H (1-Hole)
    • 2H (Two Holes)
    • 3H (Three Holes)
    • 4H (Four Holes)
    • 6H (Six Holes)
    • No Drilling Alteration

    Clear

  • Counterbored Hole Nominal Dia. [Z]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • F(mm)

     [5-491/0.5mm Unit(s)]

    Clear

  • G(mm)

     [5-495/0.5mm Unit(s)]

    Clear

  • Through Hole Nominal Dia. [N]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Type

    • LUTN
    • LUTN1H
    • LUTN2H
    • LUTN3H
    • LUTN4H
    • LUTN6H
    • UTSHNE
    • UTSHNE1H
    • UTSHNE2H
    • UTSHNE3H
    • UTSHNE4H
    • UTSHNE6H
    • UTSLE
    • UTSLE1H
    • UTSLE2H
    • UTSLE3H
    • UTSLE4H
    • UTSLE6H
    • UTSME
    • UTSME1H
    • UTSME2H
    • UTSME3H
    • UTSME4H
    • UTSME6H

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

How can you attach a rubber plate?
Answer:

A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
Question:

Do you have screw-on rubber panels?
Answer:

MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.

Question:

Is NBR oil-resistant?
Answer:

The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
Question:

Which material reduces vibrations well?
Answer:

Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.

Question:

What is Vulkollan?
Answer:

Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.