Silicon Hoses / Standard / Vacuum
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
| Types | Type | Material | |||||
| Hose only | One End Swaged | Both Ends Swaged | Main Material | Reinforcement | Swage Fittings | ||
| Shape A, B | Shape C | ||||||
| Standard | HOSSW | HOSSWK | HOSSWR | Silicone Rubber | Polyester Yarn | Joint Nipples :EN 1.4301 Equiv. Fitting Cover : Aluminum | Joint Nipples :EN 1.4404 Equiv. Fitting Cover :EN 1.4301 Equiv. |
| Vacuum | SNHT | SNHTK | SNHTR | Silicone Rubber | Polyester Yarn + EN 1.4401 Equiv. Coil | - | Joint Nipples :EN 1.4404 Equiv. Fitting Cover :EN 1.4301 Equiv. |
Specifications
| Part Number | - | Hose Length | - | Shape L | - | Shape R |
| HOSSW6 HOSSWK1.5S SNHTR2S | - - - | 1.5 2.0 1.0 | - - | LC LC | - | RC |
| No. | HOSSW HOSSW□ | |||||
| I.D. (mm) | O.D. (mm) | Thickness (mm) | Min. Bending Radius (mm) | Operating Pressure (MPa) | Operating Temp. Range (°C) | |
| 6 | 6.3 | 12.3 | 3 | 80 | 0~1.0 | -30~150 |
| 9 | 9.5 | 16 | 3.25 | 100 | 0~1.0 | |
| 12 | 12.7 | 19.5 | 3.4 | 130 | 0~0.5 | |
| 19 | 19.0 | 28 | 4.5 | 180 | 0~0.5 | |
| 1S | 25.4 | 35.5 | 5.05 | 220 | 0~0.5 | |
| 1.5S | 38.1 | 50.5 | 6.2 | 310 | 0~0.5 | |
| 2S | 50.8 | 64.5 | 6.85 | 550 | 0~0.3 | |
| No. | SNHT□ SNHT□ | |||||
| I.D. (mm) | O.D. (mm) | Thickness (mm) | Min. Bending Radius (mm) | Operating Pressure (MPa) | Operating Temperature Range (°C) | |
| 1S | 25.4 | 35.5 | 5.05 | 180 | -0.1~0.7 | -30~150 |
| 1.5S | 38.1 | 50.5 | 6.2 | 280 | -0.1~0.7 | |
| 2S | 50.8 | 64.5 | 6.85 | 390 | -0.1~0.3 | |
| Hose Nominal I.D. | R (PT) G (PF) | Shape A | Shape B | ||
| B (Wrench Flats) | (L) | B (Wrench Flats) | (L) | ||
| 6 | 1/4 | 17 | 37 | 14 | 43 |
| 9 | 3/8 | 19 | 43 | 17 | 47 |
| 12 | 1/2 | 24 | 49 | 22 | 53 |
| 19 | 3/4 | 30 | 59 | 27 | 65 |
| Hose Nominal I.D. | Shape C | ||||
| A | B | C | D | (L) | |
| 1S | 50.5 | 43.5 | 23 | 22 | 56 |
| 1.5S | 50.5 | 43.5 | 35.7 | 34 | 73 |
| 2S | 64 | 56.5 | 47.8 | 46 | 75 |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HOSSW1S-[0.6-5/0.1] |
| HOSSWK1S-[0.6-5/0.1]-LC |
| HOSSWR1S-[0.6-5/0.1]-LC-RC |
| Part Number | Minimum order quantity | Volume Discount | Nominal I.D. | O.D. (mm) | Properties | Mounting Metal Fittings | Swage Fitting Material | Minimum Bending Radius (mm) | Operating Pressure (MPa) | Hose Length (m) | Left End Swaged Fitting Shape | Right End Swaged Fitting Shape | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Hose Only | - | 220 | 0～0.5 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 220 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 220 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] |
Loading...
More Information
• The spirally knitted pressure-resistant reinforcement wire prevents burst due to wire failure
near couplings.
• Semi-transparent wall enabling the transfer of materials to be observed.
• Excellent in cold resistance and heat resistance.
• Conforms to Food Sanitation Laws.
• FDA compliant.
■ Feature of SNHT (Vacuum)
• Provides high level of deformation resistance to enable force-feed and vacuum.
• Semi-transparent wall enabling the transfer of materials to be observed.
• Excellent in cold resistance and heat resistance.
• Conforms to Food Sanitation Laws.
• FDA compliant.
■ CAUTION
• Avoid use with non-polar organic solvents (benzene, toluene, hexane etc.), halogenated
hydrocarbon (methylene chloride, trichloroethane etc.), strongly acid condensed agent, strong
alkali solution, mineral oil, steam (long-time use) or animal and vegetable oils over 70˚C.
• Cleanse inside the hose before using with drinking water or food.
• For food plumbing, metal shape C is recommended for its safety in sanitary respect.
• At steam cleansing, apply saturated steam at 0.2MPa or lower for a short time.
• Do not soak hoses or fittings in drinking water, food or fluids. Fluid may remain behind the
fitting and unwanted bacteria may adhere to it.
Basic information
| Applicable Fluid / Usage | Water / Air / Special factory requirements | Cutting Service Usage | Yes | Hose Material | Silicone Rubber |
|---|---|---|---|---|---|
| Color | Milky White | Operating Temperature Range(℃) | -30::150 |
Configure
Basic Attributes
-
O.D.(mm)
-
Properties
- Standard Type
- Heat Resistance
- Low Temp. Resistance
- Vacuum Type
-
Mounting Metal Fittings
- Hose Only
- One End Swaged
- Both Ends Swaged
-
Swage Fitting Material
- EN 1.4301 Equiv.
- EN 1.4404 Equiv.
-
Minimum Bending Radius(mm)
-
Hose Length(m)
-
Left End Swaged Fitting Shape
- Shape A [LA]
- Shape B [LB]
- Shape C [LC]
-
Right End Swaged Fitting Shape
- Shape A [RA]
- Shape B [RB]
- Shape C [RC]
-
Type
- HOSSW
- HOSSWK
- HOSSWR
- SNHT
- SNHTK
- SNHTR
-
Nominal I.D.
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Fittings for Hoses / 90 Deg. Elbow / Threaded / Barbed
MISUMI Standard Price : 10.83 € Shipping Days: Same day
-
Fittings for Hoses / Nipples / Threaded / Barbed
MISUMI Standard Price : 2.39 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.