Ball Splines / Both Ends Tapped (Part Numbers - CAD Download)
Click on this image to zoom in.
Click on this image to zoom in.
(i)Remark
- The spline nut key or the positional relationship between the mounting hole and any alteration, including wrench flats, set screw flats, keyways, etc., cannot be specified. The alteration position displayed in the 3D preview is only an example and differs from the actual machining position
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
| Both Ends Tapped | Spline Shafts [ M ] EN 1.3505 Equiv. Nut [ M ] EN 1.7242 Equiv. [ H ] Hardness: 58HRC~ | Spline Shaft, Nut [ M ] Material: EN 1.4125 Equiv. [ H ] Hardness: 55HRC~ | |
| Nut 1 pc. | Nut 2 pcs. | Nut 1 pc. | |
| With Round Flange Nut | BSHM | BSH2M | BASBFS |
| With Compact Flange Nut | BSHN | BSH2N | - |
| With Straight Nut | BSHS | BSH2S | BASBSS |
Specifications
| Part Number | - | L | - | M | - | N | |
  | BSHS8 BSHS8G BSHS8L | - - - | 270 270 270 | - - - | M4 M4 M4 | - - - | N4 N4 N4 |
For Days to Ship, Price and Performance, see >> P.340
| Part Number | L 1mm Increment | M (Coarse) / N (Coarse) Selection | D | Mass (kg/m) | |||||||||
| Type | No. | 1-Nut Type | 2-Nut Type | ||||||||||
| BSHM BSHN BSHS BSH2M BSH2N BSH2S BASBFS BASBSS | *6 | 60~400(190) | 60~400 | 3 | 6 | 0.23 | |||||||
| *8 | 60~400(190) | 60~400 | 3 | 4 | 8 | 0.39 | |||||||
| *10 | 60~600(390) | 90~600 | 3 | 4 | 5 | 10.4 | 0.65 | ||||||
| *13 | 60~600(390) | 100~600 | 4 | 5 | 6 | 13.4 | 1.11 | ||||||
| *16 | 70~600(390) | 110~600 | 4 | 5 | 6 | 8 | 16.6 | 1.65 | |||||
| 20 | 80~700 | 130~700 | 5 | 6 | 8 | 10 | 20.6 | 2.57 | |||||
| 25 | 90~900 | 150~900 | 5 | 6 | 8 | 10 | 12 | 25.8 | 4.04 | ||||
| 30 | 100~1150 | 170~1150 | 6 | 8 | 10 | 12 | 16 | 30.8 | 5.85 | ||||
[ ! ] For BSHN and BSH2N, only No. 6, 8 and 10 are available.
■ Round Flange Nuts, Compact Flange Nuts
| No. | D(h6) | L | Df | H | P.C.D. | d1 | d2 | h | W | d | B | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | |||
| Dynamic Ct (N · m) | Static C0t (N · m) | Dynamic C (kN) | Static C0 (kN) | M01 (N · m) | M02 (N · m) | |||||||||||||
| 6 | 14 | 25 | 30 | 6 | 22 | 3.5 | 6 | 3.1 | 6.5 | 1.5 | 18 | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.03 |
| 8 | 16 | 32 | 24 | 21 | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.04 | |||||||
| 10 | 21 | 40(33) | 42(41) | 6(8) | 32(30) | 4.5 | 8 | 4.4(5.3) | 14(8.5) | 25 | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.09 | |
| 13 | 24 | 44(36) | 44(45) | 7(8) | 33(34) | 15(10) | - | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.11 | ||||
| 16 | 31 | 50 | 51 | 7 | 40 | 4.4 | 18 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.2 | ||||
| 20 | 35 | 63 | 58 | 9 | 45 | 5.5 | 9.5 | 5.4 | 22.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.3 | |
| 25 | 42 | 71 | 65 | 52 | 26.5 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.4 | ||||||
| 30 | 47 | 80 | 75 | 10 | 60 | 6.6 | 11 | 6.5 | 30 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.57 | |
■ Straight Nuts
| No. | D (h6) | L | b | t ( +0.05 0 ) | d | α | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | Dimensions of Key (Included) | |||||||||
| Tolerance | Dynamic Ct (N · m) | Static C0t (N · m) | Dynamic C (kN) | Static C0 (kN) | M01 (N · m) | M02 (N · m) | B | h | L1 | R | ||||||||||
| Tolerance | Tolerance | |||||||||||||||||||
| 6 | 14 | 25 | 2.5 | +0.014 0 | 1.2 | 1.5 | 15° | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.012 | 2.5 | +0.016 +0.006 | 2.5 | 0 -0.025 | 10.5 | 1.25 |
| 8 | 16 | 25° | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.013 | 10.5 | ||||||||||
| 10 | 21 | 40(33) | 3 | 1.5 | - | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.06 | 3 | 3 | 17(14) | 1.5 | ||||
| 13 | 24 | 44(36) | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.07 | 17(14) | ||||||||||
| 16 | 31 | 50 | 3.5 | +0.018 0 | 2 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.15 | 3.5 | +0.024 +0.012 | 3.5 | 0 -0.030 | 18 | 1.75 | ||
| 20 | 35 | 63 | 4 | 2.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.2 | 4 | 4 | 29 | 2 | ||||
| 25 | 42 | 71 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.29 | 33 | ||||||||||
| 30 | 47 | 80 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.37 | 42 | |||||||||
Alterations
The angular positional relationship between alterations (machining position) and spline nut (hole pattern) cannot be specified (individual angular position for machining).
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Nut type | Shaft O.D. D (φ) | Shaft material | Number of nuts (pcs.) | Nut Overall Length (mm) | Nut O.D. (φ) | Shaft Overall Length L (mm) | Basic Load Rating Dynamic Rating (N) | Allowable Torque (Nm) | Nut Material | Grease | M (mm) | N (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | Straight | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 8 | EN 1.4125 Equiv. | 1 | 25 | 16 | 60 ～ 190 | 1200 | 4.8 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | - | Straight | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 10.4 | EN 1.4125 Equiv. | 1 | 33 | 21 | 60 ～ 390 | 2400 | 11 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | Straight | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 13.4 | EN 1.4125 Equiv. | 1 | 36 | 24 | 60 ～ 390 | 3300 | 20 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 9 Days | 10 | Straight | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 11 Days | 10 | Straight | 16.6 | EN 1.4125 Equiv. | 1 | 50 | 31 | 70 ～ 390 | 6200 | 51 | EN 1.4125 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Compact Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Compact Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Compact Flanged | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Compact Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Compact Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Compact Flanged | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | Straight | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 8 | EN 1.3505 Equiv. | 2 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | Straight | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 10.4 | EN 1.3505 Equiv. | 2 | 40 | 21 | 90 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | Straight | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 13.4 | EN 1.3505 Equiv. | 2 | 44 | 24 | 100 ～ 600 | 4600 | 28 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | Straight | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | Straight | 16.6 | EN 1.3505 Equiv. | 2 | 50 | 31 | 110 ～ 600 | 6200 | 51 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 1 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 1 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 8 | EN 1.3505 Equiv. | 1 | 25 | 16 | 60 ～ 400 | 1200 | 4.8 | EN 1.7242 Equiv. | ET-100K | 4 | 4 | ||
- | 1 | 10 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 1 | 40 | 21 | 60 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | Standard (S2) | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 1 | 40 | 21 | 60 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | LG2 | 4 | 4 | ||
- | 1 | 12 Days | 10 | [Flange Type] Round Flanged | 10.4 | EN 1.3505 Equiv. | 1 | 40 | 21 | 60 ～ 600 | 3800 | 19 | EN 1.7242 Equiv. | ET-100K | 4 | 4 |
Loading...
More Information
Basic information
| Shaft end shape (left) | Tapped | Shaft end shape (right) | Tapped | Type | Solid |
|---|---|---|---|---|---|
| Torque | Middle Torque | Nut length | Standard | Preload | Standard |
| Accuracy Grade | Standard Grade | The circulation type of balls | 1-fach |
Configure
Basic Attributes
-
Nut type
- Straight
- Flange Type
-
Shaft O.D. D(φ)
-
Shaft material
- EN 1.3505 Equiv.
- EN 1.4125 Equiv.
-
Number of nuts(pcs.)
-
Nut Overall Length(mm)
-
Nut O.D.(φ)
-
Shaft Overall Length L(mm)
-
Nut Material
- EN 1.4125 Equiv.
- EN 1.7242 Equiv.
-
Grease
- ET-100K
- LG2
- Standard (S2)
-
Type
- BASBFS
- BASBSS
- BSH2M
- BSH2N
- BSH2S
- BSHM
- BSHN
- BSHS
-
M(mm)
-
N(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Shaft holders / T-shape / slotted / cast iron
MISUMI Standard Price : 7.65 € Shipping Days: Same day
-
Spacer washers for linear ball bearings with flange
MISUMI Standard Price : 5.06 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.