Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | Material | Surface Treatment | Hardness |
RGEAHL | EN 1.1191 Equiv. | Black Oxide | Tooth Induction Hardened 45~55HRC |
Part Number | - | Nominal | - | Hole Machining | - | Hole Position (First) | - | Hole Position (Second) | - | Hole Position (Third) |
RGEAHL1.0 | - | 500 | - | ST | - | A50 | - | B100 | - | C200 |
RGEAHL2.0 | - | 500 | - | Z | - | A200 |
Part Number | Nominal | Hole Machining | Hole Position ABC 1mm Increment | Number of Effective Teeth | Overall Length L | P (Pitch) | W | H | h | M (Coarse) | d1 | d2 | Z1 | |
Type | Module | |||||||||||||
RGEAHL | 1.0 | 300 | A (Bottom Tapped) ST (Side Tapped) Z (Side Counterbored) | 5~293 | 95 | 298.45 | 3.142 | 10 | 12 | 11 | M3 | 3.5 | 6.5 | 3.5 |
500 | 5~494 | 159 | 499.51 | |||||||||||
1.5 | 300 | 5~291 | 63 | 296.88 | 4.712 | 15 | 20 | 18.5 | M4 | 4.5 | 8 | 4.5 | ||
500 | 5~493 | 106 | 499.51 | |||||||||||
2.0 | 500 | 6~490 | 79 | 496.37 | 6.283 | 20 | 25 | 23 | M5 | 5.5 | 9.5 | 5.5 | ||
2.5 | 500 | 6~488 | 63 | 494.8 | 7.854 | 25 | 30 | 27.5 | M5 | 5.5 | 9.5 | 5.5 | ||
3.0 | 500 | 6~492 | 53 | 499.51 | 9.424 | 30 | 35 | 32 | M5 | 5.5 | 9.5 | 5.5 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
RGEAHL1.0-300-A-A[5-293/1] |
RGEAHL1.0-300-ST-A[5-293/1] |
RGEAHL1.0-300-Z-A[5-293/1] |
RGEAHL1.0-500-A-A[5-494/1] |
RGEAHL1.0-500-ST-A[5-494/1] |
RGEAHL1.0-500-Z-A[5-494/1] |
RGEAHL1.5-300-A-A[5-291/1] |
RGEAHL1.5-300-ST-A[5-291/1] |
RGEAHL1.5-300-Z-A[5-291/1] |
RGEAHL1.5-500-A-A[5-493/1] |
RGEAHL1.5-500-ST-A[5-493/1] |
RGEAHL1.5-500-Z-A[5-493/1] |
RGEAHL2.0-500-A-A[5-490/1] |
RGEAHL2.0-500-ST-A[5-490/1] |
RGEAHL2.0-500-Z-A[5-490/1] |
RGEAHL2.5-500-A-A[5-488/1] |
RGEAHL2.5-500-ST-A[5-488/1] |
RGEAHL2.5-500-Z-A[5-488/1] |
RGEAHL3.0-500-A-A[5-492/1] |
RGEAHL3.0-500-ST-A[5-492/1] |
RGEAHL3.0-500-Z-A[5-492/1] |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Module (M) / Circular Pitch (P) | Length L (mm) | Number of Effective Teeth (teeth) | Tooth Width W (or D) (mm) | Rack Height (mm) | Hole Machining | A (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | A (Back Tapped) | 5 ~ 293 | ||
- | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | ST (Side Tapped) | 5 ~ 293 | ||
- | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | Z (Side Counterbored) | 5 ~ 293 | ||
- | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | A (Back Tapped) | 5 ~ 494 | ||
- | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | ST (Side Tapped) | 5 ~ 494 | ||
- | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | Z (Side Counterbored) | 5 ~ 494 | ||
- | 1 | 7 Days | 10 | 1.5 | 296.88 | 63 | 15 | 20 | A (Back Tapped) | 5 ~ 291 | ||
- | 1 | 7 Days | 10 | 1.5 | 296.88 | 63 | 15 | 20 | ST (Side Tapped) | 5 ~ 291 | ||
- | 1 | 7 Days | 10 | 1.5 | 296.88 | 63 | 15 | 20 | Z (Side Counterbored) | 5 ~ 291 | ||
- | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | A (Back Tapped) | 5 ~ 493 | ||
- | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | ST (Side Tapped) | 5 ~ 493 | ||
- | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | Z (Side Counterbored) | 5 ~ 493 | ||
- | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | A (Back Tapped) | 5 ~ 490 | ||
- | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | ST (Side Tapped) | 5 ~ 490 | ||
- | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | Z (Side Counterbored) | 5 ~ 490 | ||
- | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | A (Back Tapped) | 5 ~ 488 | ||
- | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | ST (Side Tapped) | 5 ~ 488 | ||
- | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | Z (Side Counterbored) | 5 ~ 488 | ||
- | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | A (Back Tapped) | 5 ~ 492 | ||
- | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | ST (Side Tapped) | 5 ~ 492 | ||
- | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | Z (Side Counterbored) | 5 ~ 492 |
Loading...
Tooth Type | Standard | Shape | Rack Gears | Heat Treatment | High Frequency |
---|---|---|---|---|---|
Ground Tooth | Provided | Surface Treatment | Black Oxide | End Face Machining | Both Ends Machined Type |
Configure
Basic Attributes
Module (M) / Circular Pitch (P)
Length L(mm)
Number of Effective Teeth(teeth)
Tooth Width W (or D)(mm)
Hole Machining
A(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes