Sprockets / 15B Series
- Volume Discount
(i)Remark
- Some part numbers may be delivered as a mix of products with a different appearance (with or without engraving), but this is not a problem with the specifications.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material |
| SP15B | EN 1.1181 Equiv. |
(Only for shaft bore specifications
and 
)Specifications
| Part Number | - | Bore Specification | - | Shaft Bore Dia. |
| SP15B20 | - | S | - | 10 |
| Shaft Bore Dia. D | Keyway b2xt2 | Set Screw M |
| 5, 6 | - | 3 |
| 8 | - | 4 |
| 10 | 3x1.4 | 4 |
| 12 | 4x1.8 | 5 |
| 15 | 5x2.3 | 6 |
| 16 | 5x2.3 | 6 |
| Part Number | Shaft Bore Specs. | Shaft Bore Specs. | Dp | Do | H | L | B | ℓ | Mass (g) | |||||||||
| Type | Number of Teeth | S Specification (DH8) | P Specification (DH7) | N Specification (DH7) | ||||||||||||||
| SP15B | 11 | S P | 5 | 5 | - | 16.9 | 19 | 11 | 10 | 2 | 4 | 9 | ||||||
| 12 | 5 | 5 | 6 | - | 18.4 | 20.5 | 12 | 10 | 2 | 4 | 10 | |||||||
| 13 | 5 | 5 | 6 | 8 | - | 19.9 | 22 | 14 | 10 | 2 | 4 | 14 | ||||||
| 14 | 8 | 8 | - | 21.4 | 23.5 | 15 | 12 | 2 | 5 | 17 | ||||||||
| 15 | 8 | 8 | - | 22.91 | 25 | 17 | 12 | 2 | 5 | 22 | ||||||||
| 16 | 10 | 10 | - | 24.41 | 26.5 | 18 | 12 | 2 | 5 | 23 | ||||||||
| 17 | 10 | 10 | - | 25.92 | 28 | 20 | 14 | 2 | 6 | 32 | ||||||||
| 18 | 10 | 10 | - | 27.43 | 29.5 | 22 | 14 | 2 | 6 | 40 | ||||||||
| 20 | 10 | 10 | - | 30.44 | 32.5 | 24 | 14 | 2 | 6 | 49 | ||||||||
| 24 | S N | 10 | - | 10 | 12 | 15 | 36.49 | 39 | 30 | 16 | 2 | 7 | 88 | |||||
| 26 | 12 | - | 12 | 15 | 16 | 39.51 | 42 | 33 | 16 | 2 | 7 | 104 | ||||||
| 28 | 12 | - | 12 | 15 | 16 | 42.54 | 45 | 37 | 16 | 2 | 7 | 131 | ||||||
| 30 | 12 | - | 12 | 15 | 16 | 45.56 | 48 | 39 | 16 | 2 | 7 | 147 | ||||||
| 33 | 12 | - | 12 | 15 | 16 | 50.1 | 52.5 | 40 | 18 | 2 | 8 | 178 | ||||||
| 35 | 12 | - | 12 | 15 | 16 | 53.13 | 55.5 | 40 | 18 | 2 | 8 | 182 | ||||||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Hole Specifications | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | 11 | 5 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 12 | 5 ～ 6 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 13 | 5 ～ 8 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 14 | 8 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 15 | 8 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 16 | 10 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 17 | 10 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 18 | 10 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 20 | 10 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | P (Round Hole + Tap) | ||
| 1 | 9 Days | 10 | 24 | 10 ～ 15 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) | ||
| 1 | 9 Days | 10 | 26 | 12 ～ 16 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) | ||
| 1 | 9 Days | 10 | 28 | 12 ～ 16 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) | ||
| 1 | 9 Days | 10 | 30 | 12 ～ 16 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) | ||
| 1 | 9 Days | 10 | 33 | 12 ～ 16 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) | ||
| 1 | 9 Days | 10 | 35 | 12 ～ 16 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (New JIS Key + Tap) |
Loading...
Basic information
| Sprocket Shape | Shape B | Nominal | 15 | Number of Tracks | Single Row |
|---|---|---|---|---|---|
| Material | EN 1.1181 Equiv. | Chain Type | RS | Surface Treatment | Not Provided |
Configure
Basic Attributes
-
Number of Teeth(T)
-
Shaft Bore Dia. D (or d)(mm)
-
Type
- Pilot Hole Type
- Shaft Bore Machined Type
-
Hole Specifications
- N (New JIS Key + Tap)
- P (Round Hole + Tap)
- S (Pilot Hole)
-
Type
- SP15B
-
Shaft Type
- Standard Pilot Hole
- Shaft Bore Machining Configurable
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 5 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Cantilever Shafts / shouldered / external thread, ring groove / spanner flat
MISUMI Shipping Days: 3 Days
-
Deep groove ball bearings / single row / small diameters / ZZ / MISUMI
MISUMI Standard Price : 1.76 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.