• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Locating pins / round, diamond-shaped / head shape selectable / with cross hole / internal thread

Locating pins / round, diamond-shaped / head shape selectable / with cross hole / internal thread

MISUMI

MISUMI

R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[FA New Product] Locating Pins - High Hardness Stainless Steel, R / Taper R, Tapped: Related Image
MaterialHardnessPin ShapeTapped
g6h7
Hardened Stainless Steel35HRC–RoundAPGAPHG
DiamondAPDGAPHDG
When the diameter exceeds Ø10, the center hardness may become 30HRC or more.
When B > 20 mm, the P dim. tolerance is 0-0.02.
For D Tolerance g6 and h7, no insertion guide is provided. (ℓ1)

Specification Table

Part Number−P−L−B−R
APEA6−P10.00−L5−B12.0−R6
■ Tolerance
D or Pm6p6g6h7
1.00–3.00+0.008
+0.002		+0.012
+0.006		−0.002
−0.008		0
−0.010
3.01–6.00+0.012
+0.004		+0.020
+0.012		−0.004
−0.012		0
−0.012
6.01–10.00+0.015
+0.006		+0.024
+0.015		−0.005
−0.014		0
−0.015
10.01–18.00+0.018
+0.007		+0.029
+0.018		−0.006
−0.017		0
−0.018
18.01–25.50+0.021
+0.008		+0.035
+0.022		-0.007
-0.020		0
-0.021
■ Tapped
Part NumberP
0.01 mm Increment		L
1 mm Increment		B
0.1 mm Increment		R
1 mm Increment		M1
(Coarse)		*Tightening Torque
N·cm		(W)
TypeTip ShapeD
<Round>
APG (g6)
APHG (h7)

<Diamond>
APDG (g6)
APHDG (h7)		A

C		66.50–12.006(9)–161.0–40.0(20.0)Shape A
R ≥ P/2

Shape C
R ≤ P/2		M31473.0
88.50–15.008(12)–16M43333.5
1010.50–16.0010(13)–20M56764.0
1212.50–17.5012(15)–205.0
1314.00–20.0012(15)–20M611565.5
1617.00–25.5017–245.0–30.0(27.0)7.0
2022.00–25.5017(18)–309.0
L dimension and B dimension in ( ) are applicable to Diamond Shape.
Note the strength of under-head part >>[Tech Info] Tab.
Please confirm Pilot Hole Depth (‘19 P.1542). Holes may go through.
*For Tightening Torque (Reference Value), see Tightening Torque Strength Class (10.9) of Technical Data on >>’19 P.4015. Not applicable when using Locking Agents or Spring Washers.

Alterations

[FA New Product] Locating Pins - High Hardness Stainless Steel, R / Taper R, Tapped: Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
APDGC6-P[6.5-12/0.01]-L[9-16/1]-B[1-20/0.1]-R[1-6/1]
APDGC8-P[8.5-15/0.01]-L[12-16/1]-B[1-20/0.1]-R[1-7/1]
APDGC10-P[10.5-16/0.01]-L[13-20/1]-B[1-20/0.1]-R[1-8/1]
APDGC12-P[12.5-17.5/0.01]-L[15-20/1]-B[1-20/0.1]-R[1-8/1]
APDGC13-P[14-20/0.01]-L[15-20/1]-B[1-20/0.1]-R[1-100/1]
APDGC16-P[17-25.5/0.01]-L[17-24/1]-B[5-27/0.1]-R[1-100/1]
APDGC20-P[22-25.5/0.01]-L[18-30/1]-B[5-27/0.1]-R[1-100/1]
APGC6-P[6.5-12/0.01]-L[6-16/1]-B[1-40/0.1]-R[1-6/1]
APGC8-P[8.5-15/0.01]-L[8-16/1]-B[1-40/0.1]-R[1-7/1]
APGC10-P[10.5-16/0.01]-L[10-20/1]-B[1-40/0.1]-R[1-8/1]
APGC12-P[12.5-17.5/0.01]-L[12-20/1]-B[1-40/0.1]-R[1-8/1]
APGC13-P[14-20/0.01]-L[12-20/1]-B[1-40/0.1]-R[1-100/1]
APGC16-P[17-25.5/0.01]-L[17-24/1]-B[5-30/0.1]-R[1-100/1]
APGC20-P[22-25.5/0.01]-L[17-30/1]-B[5-30/0.1]-R[1-100/1]
APHDGC6-P[6.5-12/0.01]-L[9-16/1]-B[1-20/0.1]-R[1-6/1]
APHDGC8-P[8.5-15/0.01]-L[12-16/1]-B[1-20/0.1]-R[1-7/1]
APHDGC10-P[10.5-16/0.01]-L[13-20/1]-B[1-20/0.1]-R[1-8/1]
APHDGC12-P[12.5-17.5/0.01]-L[15-20/1]-B[1-20/0.1]-R[1-8/1]
APHDGC13-P[14-20/0.01]-L[15-20/1]-B[1-20/0.1]-R[1-100/1]
APHDGC16-P[17-25.5/0.01]-L[17-24/1]-B[5-27/0.1]-R[1-100/1]
APHDGC20-P[22-25.5/0.01]-L[18-30/1]-B[5-27/0.1]-R[1-100/1]
APHGC6-P[6.5-12/0.01]-L[6-16/1]-B[1-40/0.1]-R[1-6/1]
APHGC8-P[8.5-15/0.01]-L[8-16/1]-B[1-40/0.1]-R[1-7/1]
APHGC10-P[10.5-16/0.01]-L[10-20/1]-B[1-40/0.1]-R[1-8/1]
APHGC12-P[12.5-17.5/0.01]-L[12-20/1]-B[1-40/0.1]-R[1-8/1]
APHGC13-P[14-20/0.01]-L[12-20/1]-B[1-40/0.1]-R[1-100/1]
APHGC16-P[17-25.5/0.01]-L[17-24/1]-B[5-30/0.1]-R[1-100/1]
APHGC20-P[22-25.5/0.01]-L[17-30/1]-B[5-30/0.1]-R[1-100/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Inlet Side Tip Shape Inlet Side Tip Type Inlet Side Dia. D1
(Ø) 		Mounting Side Dia. d
(Ø) 		Mounting Side Outer Dia. Tolerance Screw Dia. M
(mm) 		B
(mm) 		L
(mm) 		R
(mm)

-

1 7 Days DiamondTaper R6.5 ～ 126g631 ～ 209 ～ 161 ～ 6

-

1 7 Days DiamondTaper R8.5 ～ 158g641 ～ 2012 ～ 161 ～ 7

-

1 7 Days DiamondTaper R10.5 ～ 1610g651 ～ 2013 ～ 201 ～ 8

-

1 7 Days DiamondTaper R12.5 ～ 17.512g651 ～ 2015 ～ 201 ～ 8

-

1 7 Days DiamondTaper R14 ～ 2013g661 ～ 2015 ～ 201 ～ 100

-

1 7 Days DiamondTaper R17 ～ 25.516g665 ～ 2717 ～ 241 ～ 100

-

1 7 Days DiamondTaper R22 ～ 25.520g665 ～ 2718 ～ 301 ～ 100

-

1 7 Days RoundTaper R6.5 ～ 126g631 ～ 406 ～ 161 ～ 6

-

1 7 Days RoundTaper R8.5 ～ 158g641 ～ 408 ～ 161 ～ 7

-

1 7 Days RoundTaper R10.5 ～ 1610g651 ～ 4010 ～ 201 ～ 8

-

1 7 Days RoundTaper R12.5 ～ 17.512g651 ～ 4012 ～ 201 ～ 8

-

1 7 Days RoundTaper R14 ～ 2013g661 ～ 4012 ～ 201 ～ 100

-

1 7 Days RoundTaper R17 ～ 25.516g665 ～ 3017 ～ 241 ～ 100

-

1 7 Days RoundTaper R22 ～ 25.520g665 ～ 3017 ～ 301 ～ 100

-

1 7 Days DiamondTaper R6.5 ～ 126h731 ～ 209 ～ 161 ～ 6

-

1 7 Days DiamondTaper R8.5 ～ 158h741 ～ 2012 ～ 161 ～ 7

-

1 7 Days DiamondTaper R10.5 ～ 1610h751 ～ 2013 ～ 201 ～ 8

-

1 7 Days DiamondTaper R12.5 ～ 17.512h751 ～ 2015 ～ 201 ～ 8

-

1 7 Days DiamondTaper R14 ～ 2013h761 ～ 2015 ～ 201 ～ 100

-

1 7 Days DiamondTaper R17 ～ 25.516h765 ～ 2717 ～ 241 ～ 100

-

1 7 Days DiamondTaper R22 ～ 25.520h765 ～ 2718 ～ 301 ～ 100

-

1 7 Days RoundTaper R6.5 ～ 126h731 ～ 406 ～ 161 ～ 6

-

1 7 Days RoundTaper R8.5 ～ 158h741 ～ 408 ～ 161 ～ 7

-

1 7 Days RoundTaper R10.5 ～ 1610h751 ～ 4010 ～ 201 ～ 8

-

1 7 Days RoundTaper R12.5 ～ 17.512h751 ～ 4012 ～ 201 ～ 8

-

1 7 Days RoundTaper R14 ～ 2013h761 ～ 4012 ～ 201 ～ 100

-

1 7 Days RoundTaper R17 ～ 25.516h765 ～ 3017 ～ 241 ～ 100

-

1 7 Days RoundTaper R22 ～ 25.520h765 ～ 3017 ～ 301 ～ 100

Loading...

  1. 1

Basic information

Basic Shape Large Head Mounting Side Shape Female Thread Heat Treatment No
Material Steel

Configure

Clear all

28Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Inlet Side Tip Shape

    • Round
    • Diamond

    Clear

  • Inlet Side Dia. D1(Ø)

     [6.5-25.5/0.01Ø Unit(s)]

    Clear

  • Mounting Side Dia. d(Ø)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 16
    • 20

    Clear

  • Mounting Side Outer Dia. Tolerance

    • h7
    • g6

    Clear

  • Screw Dia. M(mm)

    • 3
    • 4
    • 5
    • 6

    Clear

  • B(mm)

     [1-40/0.1mm Unit(s)]

    Clear

  • L(mm)

     [6-30/1mm Unit(s)]

    Clear

  • R(mm)

     [1-100/1mm Unit(s)]

    Clear

  • Type

    • APDGA
    • APDGC
    • APGA
    • APGC
    • APHDGA
    • APHDGC
    • APHGA
    • APHGC

    Clear

  • Inlet Side Tip Type

    • Taper R
    • R

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.