Manufacturer part number: GPB16MR2090-A
Brand: MISUMI
Price: 11.43 €
Delivery time: 7 Days
Belt Width Used: 9 mm
The Number of Teeth: 16
Pulley Shape: Shape A
Material: [Aluminum] Aluminum Alloy
Surface Treatment: Black Anodized Aluminum
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GPB16MR2090-A
[ ! ]For Keyway Dimension Details, Click here
Type | Belt Width | Material*1 | Surface Treatment |
Attachment*1 Setscrews |
||
6mm | 9mm | Pulley | Flange | |||
MR2060 | MR2090 | |||||
GPA | ● | ● | Aluminum Alloy |
Aluminum Alloy |
Clear Anodize | Stainless |
GPB | ● | ● | Black Anodize | |||
GPK | ● | ● | Hard Clear Anodize*2 | |||
GPT | ● | ● | 1045 Carbon Steel |
Low Carbon Steel |
- | Steel (Black Oxide) |
GPM | ● | ● | Black Oxide | |||
GPP | ● | ● | Electroless Nickel Plating |
*1 Flanges are installed. Set screws are included with PU, NU & C bore hole specification.
*2 Hard Anodize Treatment: Film Hardness 300HV~
■Teeth No. Size
mm | Teeth No. | ||||||||||||||||||||||||||||
13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 40 | 42 | 44 | 45 | 48 | 50 | 56 | 60 | 62 | 68 | 72 | |
P.D. | 8.28 | 8.91 | 9.55 | 10.19 | 10.82 | 11.46 | 12.1 | 12.73 | 13.37 | 14.01 | 15.28 | 15.92 | 16.55 | 17.83 | 19.1 | 20.37 | 21.65 | 22.92 | 25.46 | 26.74 | 28.01 | 28.65 | 30.56 | 31.83 | 35.65 | 38.2 | 39.47 | 43.29 | 45.84 |
O.D. | 7.77 | 8.4 | 9.04 | 9.68 | 10.31 | 10.95 | 11.59 | 12.22 | 12.86 | 13.5 | 14.77 | 15.41 | 16.04 | 17.32 | 18.59 | 19.86 | 21.14 | 22.41 | 24.96 | 26.23 | 27.5 | 28.14 | 30.05 | 31.32 | 35.14 | 37.69 | 38.96 | 42.78 | 45.33 |
D | 12 | 12 | 12 | 14 | 14 | 14 | 14 | 16 | 16 | 18 | 20 | 20 | 22 | 22 | 22 | 12 | 14 | 14 | 18 | 20 | 20 | 20 | 20 | 20 | 30 | 30 | 30 | 34 | 34 |
F | 12 | 12 | 12 | 14 | 14 | 14 | 14 | 16 | 16 | 18 | 20 | 20 | 22 | 22 | 22 | 25 | 25 | 28 | 30 | 32 | 32 | 32 | 35 | 35 | 44 | 44 | 44 | 50 | 50 |
E | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 10 | 10 | 11 | 13 | 13 | 14 | 14 | 14 | 16 | 16 | 18 | 20 | 23 | 23 | 23 | 25 | 25 | 32 | 32 | 32 | 38 | 38 |
■Belt Width Size
mm | Belt Width | |
MR2060 | MR2090 | |
A | 7.4 | 10.4 |
W | 11.4 | 14.4 |
L | 19.0 | 23.0 |
Part Number | Pulley Shape | Shaft Bore Specs., I.D. | Z | J | Q | R | S | T | |||||||||
(Shaft Bore Specs.: H, P, N, C) | GPA20MR2060 | - | A | H6 | |||||||||||||
(Shaft Bore Specs.: V, F) | GPT40MR2090 | - | B | - | V6 | - | Z10 | - | J5 | ||||||||
(Shaft Bore Specs: Y) | GPM60MR2090 | - | B | - | Y8 | - | Q12 | - | R12 | - | S3 | - | T3 |
◆mm | ◆inch | ||||||||||||||||||||||||||||
Part Number | Shape | Pulley Shape | Part Number | Shape | Pulley Shape | ||||||||||||||||||||||||
Type | Teeth No |
Belt Width | A | B・K | B | Type | Teeth No |
Belt Width | A | B・K | B | ||||||||||||||||||
Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | |||||||||||||||||||||||||||
H(d) | P(d) | N(d)・C(d) | V | Y | H(d) | P(d) | N(d)・C(d) | V・F | HU(d) | PU(d) | NU(d) | HU(d) | PU(d) | NU(d) | |||||||||||||||
Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Both Ends Stepped Hole | Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | |||||||||||||||
V(d) | Z | J | Y(d) | Q・R | S・T | V(d)・ F(d) |
Z | J | |||||||||||||||||||||
Z-d≥2 | (0.1mm increment) | Q(R)-d≥2 | (0.1mm increment) | Z-d≥2 | (0.1mm increment) | ||||||||||||||||||||||||
Al GPA GPB GPK Fe GPT GPM GPP |
12 | MR2060 *A : 7.4 *W : 11.4 *L : 19.0 MR2090 *A : 10.4 *W : 14.4 *L : 23.0 |
A K |
3 | - | - | - | - | - | - | - | - | 3 | 3 | - | - | - | - | Al GPA GPB GPK Fe GPT GPM GPP |
12 | MR2060 MR2090 |
A K |
- | - | - | - | - | - | |
13 | 3 | 3 | 3 | 13 | - | - | - | - | - | - | |||||||||||||||||||
14 | 3 | 3 | 3 | 14 | - | - | - | - | - | - | |||||||||||||||||||
15 | 3 | 3 | 3 | 15 | - | - | - | - | - | - | |||||||||||||||||||
16 | 3~5 | 3 | 5 | 2.0≤J≤W-2.0 | 3 | 5 | 3~6 S+T≤W-3 |
3~5 | 3~5 | 16 | A・B | - | - | A・B | A・B | - | |||||||||||||
17 | 3~5 | 3 | 5 | 3 | 5 | 3~5 | 3~5 | 17 | A・B | - | - | A・B | A・B | - | |||||||||||||||
18 | 3~5 | 3 | 5 | 3 | 5 | 3~5 | 3~5 | 18 | A・B | - | - | A・B | A・B | - | |||||||||||||||
19 | 3~5 | 3 | 5 | 3 | 5 | 3~5 | 3~5 | 19 | A・B | - | - | A・B | A・B | - | |||||||||||||||
20 | 3~6 | 3・4 | 5・6 | 3・4 | 5・6 | 3~6 | 3~6 | 20 | A・B | - | - | A・B | A・B | - | |||||||||||||||
21 | 3~6 | 3・4 | 5・6 | 3・4 | 5・6 | 3~6 | 3~6 | 21 | A・B | - | - | A・B | A・B | - | |||||||||||||||
22 | 3~7 | 3~5 | 5~7 | 3~5 | 5~7 | 3~6 | 3~6 | 22 | A・B | - | - | A・B | A・B | - | |||||||||||||||
24 | 3~9 | 3~7 | 5~9 | 3~7 | 5~9 | 3~7 | 3~7 | 24 | A-D | - | - | A-C | A-C | - | |||||||||||||||
25 | 3~9 | 3~7 | 5~9 | 3~7 | 5~9 | 3~7 | 3~7 | 25 | A-D | - | - | A-C | A-C | - | |||||||||||||||
26 | 3~10 | 3~8 | 5~10 | 3~8 | 5~10 | 3~8 | 3~8 | 26 | A-D | - | - | A-C | A-C | - | |||||||||||||||
28 | 3~10 | 3~8 | 5~10 | 3~8 | 5~10 | 3~8 | 3~8 | 28 | A-D | - | - | A-C | A-C | - | |||||||||||||||
30 | 3~10 | 3~8 | 5~10 | 3~8 | 5~10 | 3~8 | 3~8 | 30 | A-D | - | - | A-C | A-C | - | |||||||||||||||
32 | A B |
4~12 | 4~10 | 8 | 4~10 | 6~12 | 4~10 | 6~12 | 4~8 | 4~6 | 4~6 | 6~8 | 2.0≤J≤L-2.0 | 32 | A | B-E | B-E | D | B-D | B-D | - | ||||||||
34 | 4~12 | 4~10 | 8・10・NK10 | 4~10 | 6~12 | 4~10 | 6~12 | 4~10 | 4~8 | 4~8 | 6~10 | 34 | B-E | B-E | D-E | B-D | B-D | - | |||||||||||
36 | 4~14 | 4~10 | 8・10・NK10 | 4~12 | 6~14 | 4~12 | 6~14 | 4~10 | 4~8 | 4~8 | 6~10 | 36 | B | B-F | B-E | D-E | B-D | B-D | - | ||||||||||
40 | 4~16 | 4~12 | 8~12 | 4~14 | 6~16 | 4~14 | 6~16 | 4~14 | 4~10 | 8 | 4~12 | 6~14 | 40 | B-G | B-E | D-E | B-E | B-E | D | ||||||||||
42 | 4~16 | 4~12 | 8~12 | 4~14 | 6~16 | 4~14 | 6~16 | 4~14 | 4~10 | 8 | 4~12 | 6~14 | 42 | B-G | B-E | D-E | B-E | B-E | D | ||||||||||
44 | 5~19 | 5~15 | 8~13 | 5~17 | 7~19 | 5~17 | 7~19 | 5~16 | 5~12 | 8~11 | 5~14 | 7~16 | 44 | C-G | C-F | D-F | C-G | C-E | D・E | ||||||||||
45 | 5~19 | 5~15 | 8~13 | 5~17 | 7~19 | 5~17 | 7~19 | 5~16 | 5~12 | 8~11 | 5~14 | 7~16 | 45 | C-G | C-F | D-F | C-G | C-E | D・E | ||||||||||
48 | 5~21 | 5~17 | 8~16 | 5~19 | 7~21 | 5~19 | 7~21 | 5~16 | 5~12 | 8~11 | 5~14 | 7~16 | 48 | C-H | C-G | D-G | C-G | C-E | D・E | ||||||||||
50 | 5~21 | 5~17 | 8~16 | 5~19 | 7~24 | 5~19 | 7~24 | 5~16 | 5~12 | 8~11 | 5~14 | 7~16 | 50 | C-H | C-G | D-G | C-G | C-E | D・E | ||||||||||
56 | 5~21 | 5~17 | 8~16 | 5~19 | 7~24 | 5~19 | 7~24 | 5~16 | 5~12 | 8~11 | 5~14 | 7~16 | 56 | C-H | C-G | D-G | C-G | C-E | D・E | ||||||||||
60 | 5~28 | 5~24 | 8~22 | 5~26 | 7~28 | 5~26 | 7~28 | 5~26 | 5~22 | 8~17 | 5~24 | 7~26 | 60 | C-K | C-J | D-H | C-K | C-H | D-G | ||||||||||
62 | 5~28 | 5~24 | 8~22 | 5~26 | 7~28 | 5~26 | 7~28 | 5~26 | 5~22 | 8~17 | 5~24 | 7~26 | 62 | C-K | C-J | D-H | C-K | C-H | D-G | ||||||||||
68 | 5~28 | 5~24 | 8~22 | 5~26 | 7~28 | 5~26 | 7~28 | 5~26 | 5~22 | 8~17 | 5~24 | 7~26 | 68 | C-K | C-J | D-H | C-K | C-H | D-G | ||||||||||
72 | 5~34 | 5~30 | 8~26 | 5~32 | 7~34 | 5~32 | 7~34 | 5~30 | 5~26 | 8~20 | 5~28 | 7~30 | 72 | C-L | C-K | D-J | C-K | C-K | D-H | ||||||||||
Shaft Bore Dia. 9 is not available for Shaft Bore specification N. Shaft Bore Dia.4.5・6.35 are selectable for Shaft Bore specifications H, P, V. | J~K are not available for MR2060 | ||||||||||||||||||||||||||||
Shaft Bore Dia. 8, 9, 11, 13, 14, 17, 21-26 are not available for Shaft Bore specification C. |
Inch Bore Specifications | Inch Bore Specifications | Inch Bore Specifications | ||||||||||||||||||||
No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
||
A | 0.125 | 1/8 | 3.175 | #5-40 | - | - | H | 0.750 | 3/4 | 19.050 | #10-32 | 3/16 | 0.837 | M | 1.375 | 1 3/8 | 34.925 | 5/16-18 | 5/16 | 1.518 | ||
B | 0.188 | 3/16 | 4.763 | #5-40 | - | - | HJ | 0.813 | 13/16 | 20.638 | #10-32 | 3/16 | 0.900 | MN | 1.438 | 1 7/16 | 36.513 | 5/16-18 | 3/8 | 1.605 | ||
C | 0.250 | 1/4 | 6.350 | #8-32 | - | - | J | 0.875 | 7/8 | 22.225 | 1/4-20 | 3/16 | 0.964 | N | 1.500 | 1 1/2 | 38.100 | 5/16-18 | 3/8 | 1.669 | ||
D | 0.313 | 5/16 | 7.938 | #8-32 | 3/32 | 0.357 | JK | 0.938 | 15/16 | 23.813 | 1/4-20 | 1/4 | 1.051 | P | 1.625 | 1 5/8 | 41.275 | 5/16-18 | 3/8 | 1.796 | ||
E | 0.375 | 3/8 | 9.525 | #8-32 | 3/32 | 0.421 | K | 1.000 | 1 | 25.400 | 1/4-20 | 1/4 | 1.114 | PQ | 1.688 | 1 11/16 | 42.863 | 5/16-18 | 3/8 | 1.859 | ||
EF | 0.438 | 7/16 | 11.113 | #8-32 | 3/32 | 0.484 | KLA | 1.063 | 1 1/16 | 26.988 | 1/4-20 | 1/4 | 1.178 | Q | 1.750 | 1 3/4 | 44.450 | 5/16-18 | 3/8 | 1.922 | ||
F | 0.500 | 1/2 | 12.700 | #8-32 | 1/8 | 0.56 | KLB | 1.125 | 1 1/8 | 28.575 | 1/4-20 | 1/4 | 1.241 | QR | 1.813 | 1 13/16 | 46.038 | 5/16-18 | 1/2 | 2.032 | ||
FG | 0.563 | 9/16 | 14.288 | #8-32 | 1/8 | 0.623 | KLC | 1.188 | 1 3/16 | 30.163 | 1/4-20 | 1/4 | 1.304 | R | 1.875 | 1 7/8 | 47.625 | 5/16-18 | 1/2 | 2.096 | ||
G | 0.625 | 5/8 | 15.875 | #10-32 | 3/16 | 0.709 | L | 1.250 | 1 1/4 | 31.750 | 1/4-20 | 1/4 | 1.367 | RS | 1.938 | 1 15/16 | 49.213 | 3/8-16 | 1/2 | 2.160 | ||
GH | 0.688 | 11/16 | 17.463 | #10-32 | 3/16 | 0.773 | LM | 1.313 | 1 5/16 | 33.338 | 1/4-20 | 5/16 | 1.455 | S | 2.000 | 2 | 50.800 | 3/8-16 | 1/2 | 2.223 |
BC,TPC and SLH alternations are not available for inch bores.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
GPB16MR2090-A |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Belt Width Used (mm) | The Number of Teeth | Pulley Shape | Material | Surface Treatment | Shaft Bore Dia. d (inch) | Shaft Bore Spec. (inch) | 01.[H] Shaft Bore Spec. (Round Hole) | 02.[P] Shaft Bore Spec. (Round Hole + Tap) | 03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap) | 04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) | 05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap) | 06.[V] Shaft Bore Spec. (Stepped Hole) | 07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side) | 08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
11.43 € | 1 | Available | 7 Days | 9 | 16 | Shape A | [Aluminum] Aluminum Alloy | Black Anodized Aluminum | - | - | - | - | - | - | - | - | - | - |
Loading...
Type | Timing Pulleys | Belt Type | MR2(for PowerGrip® GT®3) | Timing Pulleys/Idlers | Pulleys |
---|
This page is Timing belt pulleys / MR2 / flanged pulley deselectable / configurable / aluminium, steel, part number GPB16MR2090-A.
You can find the detail information about specifications and dimensions on part number GPB16MR2090-A.
Configure
Basic Attributes
Shaft Bore Dia. d(inch)
Shaft Bore Spec.(inch)
01.[H] Shaft Bore Spec. (Round Hole)
02.[P] Shaft Bore Spec. (Round Hole + Tap)
03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap)
04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)
05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap)
06.[V] Shaft Bore Spec. (Stepped Hole)
07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side)
08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole)
Type
Belt Width Used(mm)
The Number of Teeth
Pulley Shape
Material
Surface Treatment
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Part Number |
---|
GPB16MR2060-A |
GPB19MR2090-K |
GPB21MR2090-K |
GPK16MR2060-A |
GPK19MR2060-K |
GPK21MR2090-A |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Belt Width Used (mm) | The Number of Teeth | Pulley Shape | Material | Surface Treatment | Shaft Bore Dia. d (inch) | Shaft Bore Spec. (inch) | 01.[H] Shaft Bore Spec. (Round Hole) | 02.[P] Shaft Bore Spec. (Round Hole + Tap) | 03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap) | 04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) | 05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap) | 06.[V] Shaft Bore Spec. (Stepped Hole) | 07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side) | 08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
11.41 € | 1 | Available | 7 Days | 6 | 16 | Shape A | [Aluminum] Aluminum Alloy | Black Anodized Aluminum | - | - | - | - | - | - | - | - | - | - | |
13.72 € | 1 | Available | 7 Days | 9 | 19 | Shape K | [Aluminum] Aluminum Alloy | Black Anodized Aluminum | - | - | - | - | - | - | - | - | - | - | |
13.91 € | 1 | Available | 7 Days | 9 | 21 | Shape K | [Aluminum] Aluminum Alloy | Black Anodized Aluminum | - | - | - | - | - | - | - | - | - | - | |
11.41 € | 1 | Available | 7 Days | 6 | 16 | Shape A | [Aluminum] Aluminum Alloy | Hard Clear Anodize | - | - | - | - | - | - | - | - | - | - | |
13.63 € | 1 | Available | 7 Days | 6 | 19 | Shape K | [Aluminum] Aluminum Alloy | Hard Clear Anodize | - | - | - | - | - | - | - | - | - | - | |
11.76 € | 1 | Available | 7 Days | 9 | 21 | Shape A | [Aluminum] Aluminum Alloy | Hard Clear Anodize | - | - | - | - | - | - | - | - | - | - |