Flat Belt Conveyor / GV Series / Full Belt Type / Center Drive / 2-Slot Frame (Pulley Dia. 30mm) / GVFNE
(i)Remark
- Latest part number of conveyor is adding "E" to end of the original part number.
- Product discontinuation: The "Panasonic" motor specification (A) has been discontinued (no longer available) due to the discontinuation of production by the motor manufacturer. The "Oriental Motor" motor specification (B) is the recommended replacement. Please refer to the relevant product specifications for detailed product selection.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GVFNE
Each slot has 4 nuts inserted.
The dimensions in the diagram is for Belt Specification H (which has a belt thickness of 0.9mm). Note that the belt thickness varies
depending on belt specifications.
When L≥1,400, it is recommended to mount on at least 2 stands.
Each slot has 4 nuts inserted.
The dimensions in the diagram is for Belt Specification H (which has a belt thickness of 0.9mm). Note that the belt thickness varies
depending on belt specifications.
When L≥1,400, it is recommended to mount on at least 2 stands.
*A Dimension (Motor Overall Length) Details
| Output (W) | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 25 W | Constant speed motor | Panasonic | 5~180 | 115.0 |
| Oriental | 5~18 | 117.0 | ||
| 25~180 | 127.5 | |||
| Variable speed motor | ||||
| Oriental | 5~18 | 127.0 | ||
| 25~180 | 137.5 | |||
| 40 W | Constant speed motor | Panasonic | 5~180 | 142.0 |
| Oriental | 5~18 | 147.0 | ||
| 25~180 | 165.0 | |||
| Variable speed motor | ||||
| Oriental | 5~18 | 157.0 | ||
| 25~180 | 175.0 | |||
| Output (W) | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 60 W | Constant speed motor | Panasonic | 5~180 | 180.0 |
| Oriental | 5~180 | 185.0 | ||
| Variable speed motor | ||||
| Oriental | 5~180 | 215.0 | ||
| 90 W | Constant speed motor | Panasonic | 5~180 | 195.0 |
| Oriental | 5~180 | 200.0 | ||
| Variable speed motor | ||||
| Oriental | 5~180 | 230.0 | ||
For accumulation conveyance (only compatible with sliding belts), consider conveying capacity to be no more than 1/2 of that shown in the graph.
Conveying capacity may vary depending on operating conditions.
This graph shows conveying capacity when level.
■Gearhead Reduction Ratio *Reference Value
*Conveyance speed reference values are based on IM (motor rotational speed 1,500 rpm [50 Hz]/1,800 rpm [60 Hz]).
*May decrease depending on load condition.
For motor specification IM, the above conveyance speeds are constant speeds.
For motor specification SCM, refer to the above values for the maximum speed.
Motor specification SCM is adjustable up to (1/15) × (max. speed). The weight that can be conveyed decreases as speed decreases.
*Conveyance speed reference values are based on IM (motor rotational speed 1,500 rpm [50 Hz]/1,800 rpm [60 Hz]).
*May decrease depending on load condition.
| Gearhead Reduction Ratio | Belt Speed (m/min) | |
| 50Hz | 60Hz | |
| 5 | 47.1 | 56.5 |
| 7.5 | 31.4 | 37.7 |
| 9 | 26.2 | 31.4 |
| 12.5 | 18.8 | 22.6 |
| 15 | 15.7 | 18.8 |
| 18 | 13.1 | 15.7 |
| 25 | 9.4 | 11.3 |
| 30 | 7.9 | 9.4 |
| 36 | 6.5 | 7.9 |
| 50 | 4.7 | 5.7 |
| 60 | 3.9 | 4.7 |
| 75 | 3.1 | 3.8 |
| 90 | 2.6 | 3.1 |
| 100 | 2.4 | 2.8 |
| 120 | 2.0 | 2.4 |
| 150 | 1.6 | 1.9 |
| 180 | 1.3 | 1.6 |
For motor specification SCM, refer to the above values for the maximum speed.
Motor specification SCM is adjustable up to (1/15) × (max. speed). The weight that can be conveyed decreases as speed decreases.
| Frame | Motor Cover | Pulley Holder | |
| Material | Aluminum | Aluminum | Aluminum |
| Surface Treatment | Clear Anodize | Painted | Painted |
Specifications
| Part Number | - | B | - | L | - | Output | - | Belt Specifications | - | Motor Manufacturer Selection | ( | - | Alterations | ) | ||||||||
| Output | - | Voltage | - | Specifications | - | Gearhead Reduction Ratio | ||||||||||||||||
| GVFNE | - | 230 | - | 1500 | - | 25 | - | TA230 | - | IM | - | 36 | - | D | - | A | ( | - | MP · FYA · FYB · SCB · NA · WA ) | |||
| Part Number | B 10 mm Increments | L 5 mm Increments | Motor | Belt Specifications | Motor Manufacturer Selection The prices vary by manufacturer. | ||||||||
| Output (W) | Voltage (V) | Specifications | Gearhead Reduction Ratio | ||||||||||
| GVFNE | 50~300 | 320~2000 | 25 40 60 90 | TA230 (single-phase)* | IM (Constant Speed Motor) SCM (Variable Speed Motor) |
| H (General Purpose, Green) W (General Purpose, White) G (For Sliding, Green) S (For Sliding, White) D (For Electronic Parts Transfer, Black) F (For Food Transfer, White) N (Non-adhesive, White) J (No Belt) | A (Panasonic Motor) B (Oriental Motor) When motor specification is SCM (Variable Speed Motor),A (Panasonic Motor) is not applicable. | |||||
| NV (No Motor) | NM (No Motor) | NH (No Gearhead) | R (No Motor, Gearhead) | ||||||||||
When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor output. For the dimension details, see Technical Information in our Conveyor Selection web site.
When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit by following instructions on the included assembly procedure manual. See our Conveyor Selection site for packaging details.
Mounting brackets for speed controllers are not included with the variable speed motor. When mounting brackets for speed controllers are required, select [SCB] as an alteration.
Regardless of belt specifications, it is not recommended to use the belt while the conveyor is tilted.
■Conveyor weight
*Reference values (vary depending on motor manufacturer) (kg)
*When the motor output is 40 W, add 2.7 kg.
*When the motor output is 60 W, add 3.6 kg.
*When the motor output is 90 W, add 3.9 kg.
*Reference values (vary depending on motor manufacturer) (kg)
| Belt Width B (mm) | Distance between Pulleys L (mm) | |||
| 500 | 1000 | 1500 | 2000 | |
| 100 | 7.8 | 9.3 | 10.9 | 12.4 |
| 200 | 10.2 | 12.3 | 14.3 | 16.3 |
| 300 | 12.7 | 15.2 | 17.7 | 20.2 |
*When the motor output is 60 W, add 3.6 kg.
*When the motor output is 90 W, add 3.9 kg.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| GVFNE-[50-300/10]-[320-2000/5]-[25,40,60,90]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[D,F,G,H,J,N,S,W]-[B,R] |
| GVFNE-[50-300/10]-[320-2000/5]-[25,40,60,90]-TA230-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[D,F,G,H,J,N,S,W]-[B,R] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | [B] Belt Width (mm) | [L] Conveyer Length (mm) | Motor Output (W) | [TA] Motor Voltage (Single-Phase) (V) | Motor Voltage (No Motor) | Motor Type | Gearhead Reduction Ratio | Belt Specification | Belt Specifications | Motor Manufacturer Selection | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 16 Days | 50 ～ 300 | 320 ～ 2000 | 25 ～ 90 | - | [NV] No Motor | [IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor | 5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads | [S] For Sliding - White | [D] For Electronic Parts Transfer - Black / [F] For Food Transfer - White / [G] For Sliding - Green / [H] General Purpose - Green / [J] No Belt / [N] Non-adhesive - White / [W] General Purpose - White | [B] Oriental Motor / [R] No Motor Gearhead | ||
- | 1 | 16 Days | 50 ～ 300 | 320 ～ 2000 | 25 ～ 90 | 230 | - | [IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor | 5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads | [S] For Sliding - White | [D] For Electronic Parts Transfer - Black / [F] For Food Transfer - White / [G] For Sliding - Green / [H] General Purpose - Green / [J] No Belt / [N] Non-adhesive - White / [W] General Purpose - White | [B] Oriental Motor / [R] No Motor Gearhead |
Loading...
Price List
| Part Number | B | Available Sizes | ||||||||||||||||
| L320~ 400 | L405~ 500 | L505~ 600 | L605~ 700 | L705~ 800 | L805~ 900 | L905~ 1000 | L1005~ 1100 | L1105~ 1200 | L1205~ 1300 | L1305~ 1400 | L1405~ 1500 | L1505~ 1600 | L1605~ 1700 | L1705~ 1800 | L1805~ 1900 | L1905~ 2000 | ||
| GVFNE | 50 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| 60~100 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 110~150 | − | − | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 160~200 | − | − | − | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 210~250 | − | − | − | − | − | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 260~300 | − | − | − | − | − | − | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
Basic information
| Driving Type | Center Drive | Max. Mass of Conveyed Material(kg) | 15 | Belt Type | Flat Belt |
|---|---|---|---|---|---|
| With Meandering Prevention Crosspiece | Pulleys crowned for meandering prevention | Feature | Full Belt Type | Tail Roller Dia. D (Tail Transfer Part R)(mm) | 30 |
| Drive Roller Dia.(mm) | 30 | Reverse Switch Option | Not Provided |
Configure
Basic Attributes
-
[B] Belt Width(mm)
-
[L] Conveyer Length(mm)
-
Motor Output(W)
-
[TA] Motor Voltage (Single-Phase)(V)
-
Motor Voltage (No Motor)
- [NV] No Motor
-
Motor Type
- [IM] Constant Speed Motor
- [NM] No Motor
- [SCM] Variable Speed Motor
-
Gearhead Reduction Ratio
-
Belt Specification
- [S] For Sliding - White
-
Belt Specifications
- [D] For Electronic Parts Transfer - Black
- [F] For Food Transfer - White
- [G] For Sliding - Green
- [H] General Purpose - Green
- [J] No Belt
- [N] Non-adhesive - White
- [W] General Purpose - White
-
Motor Manufacturer Selection
- [B] Oriental Motor
- [R] No Motor Gearhead
-
Type
- GVFNE
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 16 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.