• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

[Clean & Pack]Square Shim - Configurable - Notched Hole

[Clean & Pack]Square Shim - Configurable - Notched Hole

MISUMI

MISUMI

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□
·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□
Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications
SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
Post battery assembly process
SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removal		 Clean environment (Class 10 to 1,000*) Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reduction		 Vacuum environment
Clean environment (Class 10 to 1,000*)		 Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

The notched hole outer diameter can be specified in 0.1 mm increments and the hole position in 0.1 mm increments.

(i)Remark

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

One SlotTwo SlotsThree Slots          
[Clean & Pack]Square Shim - Configurable - Notched Hole: Related Image[Clean & Pack]Square Shim - Configurable - Notched Hole: Related Image[Clean & Pack]Square Shim - Configurable - Notched Hole: Related Image
Machining Conditions of Notched Hole Type: "!" f ≥ 3 "!" a ≥ 3 "!" m ≥ 3 "!" n ≥ 3
[ ! ]Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m.
Type[M]Material[H]Hardness[T]Thickness (T) ToleranceCleaning Method
One SlotTwo SlotsThree Slots0.050.10.150.20.30.51.02.03.0Cleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SH-ASAFSSH-ASFFSSH-ASCFST = 0.05 to 1.0 EN 1.4301 Equiv.
T = 2.0·3.0
EN 1.4301 Equiv.		370 to 430HV
—		±0.005±0.02±0.025±0.03±0.035±0.04±0.05±0.20±0.25Precision cleaning Class 1,000*Degassing double packingClass 10**
SHD-ASAFSSHD-ASFFSSHD-ASCFSElectrolytic polishing + precision cleaning
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number—A—B—T—Q—E—C
SH-ASAFS—A100—B25—T1.0—Q12—E15—C12
Part Number1 mm IncrementsSelection0.1 mm Increments
TypeABTQECP
One HoleSH-ASAFSSHD-ASAFS10 to 150 10 to 1500.05
0.1
0.15
0.2
0.3
0.5
1.0
2.0
3.0		3 to 31Q/2+3 or more0
to
B- (Q/2+3)		[!]For One Hole Type, specification is not necessary
Two Holes

Three Holes		SH-ASFFS

SH-ASCFS		SHD-ASFFS

SHD-ASCFS		16 to 20010 to 200Q+3 or more
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water
 
 		     
After cleaning with pure water
Ultrasonic pure water cleaning
*3 times
Dry
 
 
Anti-rust single packing
 
 
·Precision cleaning (Part Number: SH-□□)
 

Working Environment:Class 1,000*

 

Working Environment:Class 10**


Hydrocarbon cleaning
Ro water cleaning
 
After high-pressure water jet
cleaning (Ro water) Wash with
pure water (10 MΩ·cm)
Use pure water
(13 MΩ·cm)
 
Use nitrogen blow

 
Conducted on a clean
bench in a Class 10**
clean environment
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment:Class 1,000*

 

Working Environment:Class 10**


Hydrocarbon
cleaning Ro
water cleaning
 
Electrolytic polishing
with an electrolytic
polishing layer
according to the material
After high-pressure
water jet cleaning
(Ro water) Wash
with pure water (10 MΩ·cm)
Use warm pure
water (13 MΩ·cm)

 
Use nitrogen blow


 
Conducted on a clean
bench in a Class 10**
clean environment
 
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Possible applications

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal		Clean environment Class 10 to 1,000*)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000*)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
SH-ASAFS-A[10-150/1]-B[10-150/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-150/0.1]
SH-ASCFS-A[16-200/1]-B[10-200/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-134.2/0.1]
SH-ASFFS-A[16-200/1]-B[10-200/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-188.2/0.1]
SHD-ASAFS-A[10-150/1]-B[10-150/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-150/0.1]
SHD-ASCFS-A[16-200/1]-B[10-200/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-134.2/0.1]
SHD-ASFFS-A[16-200/1]-B[10-200/1]-T[0.05,​0.1,​0.15,​0.2,​0.3,​0.5,​1,​2,​3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-188.2/0.1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
Cleaning Method Number of Notched, Round Holes A
(mm) 		B
(mm) 		C
(mm) 		E
(mm) 		P
(mm) 		Q
(mm) 		T
(mm)
1 8 Days Precision CleaningOne Slot10 ～ 15010 ～ 1500 ～ 1504.5 ～ 142.1-3 ～ 310.05 ～ 3
1 8 Days Precision CleaningThree Slots16 ～ 20010 ～ 2000 ～ 194.14.5 ～ 142.16 ～ 134.23 ～ 310.05 ～ 3
1 8 Days Precision CleaningTwo Slots16 ～ 20010 ～ 2000 ～ 194.14.5 ～ 142.16 ～ 188.23 ～ 310.05 ～ 3
1 8 Days Electrolytic polishing + precision cleaningOne Slot10 ～ 15010 ～ 1500 ～ 1504.5 ～ 142.1-3 ～ 310.05 ～ 3
1 8 Days Electrolytic polishing + precision cleaningThree Slots16 ～ 20010 ～ 2000 ～ 194.14.5 ～ 142.16 ～ 134.23 ～ 310.05 ～ 3
1 8 Days Electrolytic polishing + precision cleaningTwo Slots16 ～ 20010 ～ 2000 ～ 194.14.5 ～ 142.16 ～ 188.23 ～ 310.05 ～ 3

Loading...

  1. 1

Basic information

Environmentally Friendly RoHS compliant (10 substances) Properties / applications Clean washing Rectangular Shim Type Slotted
Material EN 1.4301 Equiv.

Configure

Clear all

6Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Cleaning Method

    • Precision Cleaning
    • Electrolytic polishing + precision cleaning

    Clear

  • Number of Notched, Round Holes

    • One Slot
    • Three Slots
    • Two Slots

    Clear

  • A(mm)

     [10-200/1mm Unit(s)]

    Clear

  • B(mm)

     [10-200/1mm Unit(s)]

    Clear

  • C(mm)

     [0-194.1/0.1mm Unit(s)]

    Clear

  • E(mm)

     [4.5-142.1/0.1mm Unit(s)]

    Clear

  • P(mm)

     [6-188.2/0.1mm Unit(s)]

    Clear

  • Q(mm)

     [3-31/0.1mm Unit(s)]

    Clear

  • T(mm)

    • 0.05
    • 0.1
    • 0.15
    • 0.2
    • 0.3
    • 0.5
    • 1
    • 2
    • 3

    Clear

  • Type

    • SH-ASAFS
    • SH-ASCFS
    • SH-ASFFS
    • SHD-ASAFS
    • SHD-ASCFS
    • SHD-ASFFS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 8 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.