Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |
D tol. h6 | D Tol. h7 | |||
SFJWEU | - | EN1.1213 | Effective Hardened Depth of Induction Hardening>>P.112 EN1.1213 58HRC~ | - |
- | PSFJWEU | Hard Chrome Plating Plating Hardness: HV750~ Plating Thickness: 5μ or More |
Part Number | - | L | - | M | - | N |
SFJWEU8 | - | 200 | - | M4 | - | N4 |
Part Number | L specified in 1mm Increment | M (Coarse), N (Coarse) Selection | D Tol. | C | |||||||||||||||
Type | D | h6 | h7 | ||||||||||||||||
(D Tolerance h6) SFJWEU | (D Tolerance h7) PSFJWEU | 6 | 20~ 600 | 3 | 0 -0.008 | 0 -0.012 | 0.5 or Less | ||||||||||||
8 | 20~ 800 | 3 | 4 | 5 | 0 -0.009 | 0 -0.015 | 0.5 or Less | ||||||||||||
10 | 20~ 800 | 3 | 4 | 5 | 6 | 0.5 or Less | |||||||||||||
12 | 20~1000 | 4 | 5 | 6 | 8 | 0 -0.011 | 0 -0.018 | 0.5 or Less | |||||||||||
13 | 25~1000 | 4 | 5 | 6 | 8 | 0.5 or Less | |||||||||||||
15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | 0.5 or Less | ||||||||||||
16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 0.5 or Less | ||||||||||||
20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 0 -0.013 | 0 -0.021 | 1.0 or Less | |||||||||
25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1.0 or Less | ||||||||||
30 | 35~1200 | 6 | 8 | 10 | 12 | 16 | 1.0 or Less |
Part Number | - | L | - | M(MSC,MD) | - | N(NSC,MD) | - | (LKC…etc.) |
SFJWEU30 | - | 500 | - | M8 | - | N10 | - | LKC |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shaft Dia. D (mm) | Length L (mm) | Surface Treatment | Shaft Fits Tolerance | [M]Thread (Deep 2xM) | Change Tapped Thread M to Fine One [MSC] (mm) | Change the effective tap depth to Mx3 (mm) | [N] Thread (Deep 2xN) (mm) | Change Tapped Thread N to Fine One [NSC] (mm) | Change the effective tap depth to Nx3 (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | 4 ~ 16 | - | - | 4 ~ 16 | - | - | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | 4 ~ 16 | - | - | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | 4 ~ 16 | - | - | - | 8 ~ 14 | - | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | 4 ~ 16 | - | - | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | - | 8 ~ 14 | - | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | 4 ~ 16 | - | - | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 25 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | - | 8 ~ 14 | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | 6 ~ 16 | - | - | 6 ~ 16 | - | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | 6 ~ 16 | - | - | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | 6 ~ 16 | - | - | - | 8 ~ 14 | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | 6 ~ 16 | - | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | - | 6 ~ 16 | - | 8 ~ 14 | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | 6 ~ 16 | - | - | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | - | - | 6 ~ 16 | ||
- | 1 | 4 Days | 30 | 35 ~ 1200 | No | h6 | - | 8 ~ 14 | - | - | 8 ~ 14 | - |
Loading...
Basic Shape | Straight | Shaft end shape (left) | Tapped | Shaft end shape (right) | Tapped |
---|---|---|---|---|---|
Tightening Tools Type | Not Provided | Shaft end perpendicularity | Perpendicularity (0.2) | Material | EN 1.1213 |
Heat Treatment | Induction Hardened | Hardness | Induction Hardening(58HRC~) |
Configure
Basic Attributes
Shaft Dia. D(mm)
Length L(mm)
Surface Treatment
Shaft Fits Tolerance
[M]Thread (Deep 2xM)
Change Tapped Thread M to Fine One [MSC](mm)
Change the effective tap depth to Mx3(mm)
[N] Thread (Deep 2xN)(mm)
Change Tapped Thread N to Fine One [NSC](mm)
Change the effective tap depth to Nx3(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes