Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |||
With Wrench Flats | With Cross-Drilled Hole | |||||
D tol. h6 | D tol. h7 | D tol. h6 | D tol. h7 | |||
SFJZEU | - | SFHZEU | - | EN1.1213 | Effective Hardened Depth of Induction Hardening>>P.112 EN1.1213 58HRC~ | - |
- | PSFJZEU | - | PSFHZEU | Hard Chrome Plating Plating Hardness: HV750~ Plating Thickness: 5μ or More |
Part Number | - | L | - | M | - | N | - | SC | - | H |
SFJZEU10 | - | 200 | - | M5 | - | N5 | - | SC10 |
Part Number | L specified in 1mm Increment | M (Coarse), N (Coarse) Selection | Wrench Flats Dimensions | D Tol. | C | ||||||||||||||
Type | D | SC | W | ℓ1 | h6 | h7 | |||||||||||||
(With Wrench Flats) (D Tolerance h6) SFJZEU (DTolerance h7) PSFJZEU | 6 | 20~600 | 3 | SC=1mm Increment [ ! ]SC+ℓ1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats P.112 | 5 | 8 | 0 -0.008 | 0 -0.012 | 0.5 or Less | ||||||||||
8 | 20~800 | 3 | 4 | 5 | 7 | 8 | 0 -0.009 | 0 -0.015 | 0.5 or Less | ||||||||||
10 | 20~800 | 3 | 4 | 5 | 6 | 8 | 8 | ||||||||||||
12 | 20~1000 | 4 | 5 | 6 | 8 | 10 | 10 | 0 -0.011 | 0 -0.018 | ||||||||||
13 | 25~1000 | 4 | 5 | 6 | 8 | 11 | 10 | ||||||||||||
15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | 13 | 10 | |||||||||||
16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 14 | 10 | |||||||||||
20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 10 | 0 -0.013 | 0 -0.021 | 1.0 or Less | |||||||
25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 10 | |||||||||
30 | 35~1200 | 6 | 8 | 10 | 12 | 16 | 27 | 15 |
Part Number | L specified in 1mm Increment | M (Coarse), N (Coarse) Selection | Cross-Drilled Hole Dimensions | D Tol. | C | |||||||||||
Type | D | H | d | h6 | h7 | |||||||||||
(With Cross-Drilled Hole) (D Tolerance h6) SFHZEU (D Tolerance h7) PSFHZEU | 8 | 20~500 | 3 | 4 | 5 | H=1mm Increment [ ! ]L≥H+d/2+Nx2.5+6 [ ! ]H≥Mx2.5+d/2+6 | 3 | 0 -0.009 | 0 -0.015 | 0.5 or Less | ||||||
10 | 20~500 | 3 | 4 | 5 | 6 | 3 | ||||||||||
12 | 20~500 | 4 | 5 | 6 | 8 | 3 | 0 -0.011 | 0 -0.018 | ||||||||
13 | 25~500 | 4 | 5 | 6 | 8 | 4 | ||||||||||
15 | 25~500 | 4 | 5 | 6 | 8 | 10 | 4 | |||||||||
16 | 30~500 | 4 | 5 | 6 | 8 | 10 | 4 | |||||||||
20 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 6 | 0 -0.013 | 0 -0.021 | 1.0 or Less | |||||
25 | 35~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 7 | |||||||
30 | 35~500 | 6 | 8 | 10 | 12 | 16 | 7 |
Part Number | - | L | - | M(MSC,MD) | - | N(NSC,MD) | - | SC | - | H | - | (LKC…etc.) |
SFJZEU30 | - | 500 | - | M8 | - | N10 | - | SC10 | - | LKC |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Tightening Tools Type | Shaft Dia. D (mm) | Length L (mm) | Surface Treatment | Shaft Fits Tolerance | Tapped (Coarse)[M] (mm) | Change Tapped Thread M to Fine One [MSC] (mm) | Change the effective tap depth to Mx3 (mm) | Tapped (Coarse)[N] (mm) | Change Tapped Thread N to Fine One [NSC] (mm) | Change the effective tap depth to Nx3 (mm) | Add Wrench Flats at One Location [SC](SC) (mm) | H (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | 4 ~ 12 | - | - | - | 8 ~ 14 | - | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | - | 6 ~ 12 | 4 ~ 12 | - | - | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | - | 6 ~ 12 | - | - | 6 ~ 12 | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | - | 6 ~ 12 | - | 8 ~ 14 | - | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | 8 ~ 14 | - | 4 ~ 12 | - | - | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | - | 6 ~ 12 | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 20 | 30 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | 8 ~ 14 | - | - | 0 ~ 495 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | 4 ~ 16 | - | - | 4 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | 4 ~ 16 | - | - | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | 4 ~ 16 | - | - | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | 4 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | 4 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 25 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | 6 ~ 16 | - | - | 6 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | 6 ~ 16 | - | - | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | 6 ~ 16 | - | - | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | 6 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | - | 6 ~ 16 | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | 6 ~ 16 | - | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | - | 6 ~ 16 | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Cross-Drilled Hole | 30 | 35 ~ 500 | No | h6 | - | 8 ~ 14 | - | - | 8 ~ 14 | - | - | 0 ~ 494 | ||
- | 1 | 4 Days | With Wrench Flats | 6 | 20 ~ 600 | No | h6 | 3 | - | - | 3 | - | - | 0 ~ 592 | - | ||
- | 1 | 4 Days | With Wrench Flats | 8 | 20 ~ 800 | No | h6 | 3 ~ 5 | - | - | 3 ~ 5 | - | - | 0 ~ 792 | - | ||
- | 1 | 4 Days | With Wrench Flats | 10 | 20 ~ 800 | No | h6 | 3 ~ 6 | - | - | 3 ~ 6 | - | - | 0 ~ 792 | - | ||
- | 1 | 4 Days | With Wrench Flats | 10 | 20 ~ 800 | No | h6 | 3 ~ 6 | - | - | - | - | 6 | 0 ~ 792 | - | ||
- | 1 | 4 Days | With Wrench Flats | 10 | 20 ~ 800 | No | h6 | - | - | 6 | 3 ~ 6 | - | - | 0 ~ 792 | - | ||
- | 1 | 4 Days | With Wrench Flats | 10 | 20 ~ 800 | No | h6 | - | - | 6 | - | - | 6 | 0 ~ 792 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | 4 ~ 8 | - | - | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | 4 ~ 8 | - | - | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | 4 ~ 8 | - | - | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | - | 6 ~ 8 | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | - | 6 ~ 8 | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | - | 6 ~ 8 | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | 8 | - | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | 8 | - | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 12 | 20 ~ 1000 | No | h6 | - | 8 | - | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | 4 ~ 8 | - | - | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | 4 ~ 8 | - | - | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | 4 ~ 8 | - | - | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 8 | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 8 | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 8 | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | 8 | - | 4 ~ 8 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | 8 | - | - | - | 6 ~ 8 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 13 | 25 ~ 1000 | No | h6 | - | 8 | - | - | 8 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | 4 ~ 10 | - | - | 4 ~ 10 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | 4 ~ 10 | - | - | - | - | 6 ~ 10 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | 4 ~ 10 | - | - | - | 8 ~ 10 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 10 | 4 ~ 10 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 10 | - | - | 6 ~ 10 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | - | 6 ~ 10 | - | 8 ~ 10 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | 8 ~ 10 | - | 4 ~ 10 | - | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | 8 ~ 10 | - | - | - | 6 ~ 10 | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 15 | 25 ~ 1000 | No | h6 | - | 8 ~ 10 | - | - | 8 ~ 10 | - | 0 ~ 990 | - | ||
- | 1 | 4 Days | With Wrench Flats | 16 | 30 ~ 1200 | No | h6 | 4 ~ 10 | - | - | 4 ~ 10 | - | - | 0 ~ 1190 | - | ||
- | 1 | 4 Days | With Wrench Flats | 16 | 30 ~ 1200 | No | h6 | 4 ~ 10 | - | - | - | - | 6 ~ 10 | 0 ~ 1190 | - |
Loading...
Basic Shape | Straight | Shaft end shape (left) | Tapped | Shaft end shape (right) | Tapped |
---|---|---|---|---|---|
Shaft end perpendicularity | Perpendicularity (0.2) | Material | EN 1.1213 | Heat Treatment | Induction Hardened |
Hardness | Induction Hardening(58HRC~) |
Configure
Basic Attributes
Tightening Tools Type
Shaft Dia. D(mm)
Length L(mm)
Surface Treatment
Shaft Fits Tolerance
Tapped (Coarse)[M](mm)
Change Tapped Thread M to Fine One [MSC](mm)
Change the effective tap depth to Mx3(mm)
Tapped (Coarse)[N](mm)
Change Tapped Thread N to Fine One [NSC](mm)
Change the effective tap depth to Nx3(mm)
Add Wrench Flats at One Location [SC](SC)(mm)
H(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes