Pressure Welding Tool / Crimping Tool, Bare Crimp Terminal for Bare Crimp Ring (Part Numbers)
Connecting tool for crimping and connecting electrical cables with cable connectors for copper wires from 1.25 to 8.0 mm2 or bare ferrules for copper cables.
JIS standard (JIS C 9711) purchased product based on the Industrial Standards Act, so you can use it with confidence.
JIS standard (JIS C 9711) purchased product based on the Industrial Standards Act, so you can use it with confidence.
● It has acquired JIS standards (JIS C 9711) allowing for safe use.
● Length: 275 mm Weight: 430 g
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
5N18
Specifications
Electric Wire Combination Examples
| Bare Crimp Terminal Bare Crimp Ring Nominal | Bare Crimp Terminal Stranded Wire (mm) | Bare Crimp Ring | 5N18 Die Part Nominal | |
| Butt-jointing Stranded Wire (mm) | Overlapping Stranded Wire (mm) | |||
| 1.25 | 1.25 | 0.75 and 0.75 0.90 and 0.90 1.25 and 1.25 | - | 1.25 |
| 2 | 1.25 2.0 | 2.0 and 2.0 | 0.75 and 0.75 0.90 and 0.90 1.25 and 1.25 | 2 |
| 5.5 | 3.5 5.5 | 3.5 and 3.5 5.5 and 5.5 | 2.0 and 2.0 | 5.5 |
| 8 | 8.0 | 8.0 and 8.0 | 3.5 and 3.5 | 8.0 |
Basic information
| Applicable Type | Bare Crimp Terminal / Crimping Tool For Bare Crimp Ring | Outer Diameter Dimension(cm/mm) | 275mm | Weight(G) | 430 |
|---|
This page is Pressure Welding Tool / Crimping Tool, Bare Crimp Terminal for Bare Crimp Ring, part number 5N18.
You can find the detail information about specifications and dimensions on part number 5N18.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.