TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model (Part Numbers)

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

Click on this image to zoom in.

Click on this image to zoom in.

  • Volume Discount
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

 TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image
Part Number
TSC-MCR-LS-HFEM3S4
TSC-MCR-LS-HFEM3S6
TSC-MCR-LS-HFEM3S8
TSC-MCR-LS-HFEM3S10
TSC-MCR-LS-HFEM3S12
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Outer Diameter (D)
(φ)
R Size
(mm)
Flute Length (ℓ)
(mm)
Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
Length Under Neck (ℓ1)
(mm)
Figure Shoulder Radius R1
(mm)
Base Radius R2
(mm)
Approximate R-Value
(mm)
Under Neck Diameter d1
(mm)

89.61 €

1 Available 5 Days 40.81388063510.540.8133.8

119.45 €

1 Available 5 Days 61.2191012067010.591.2195.7

95.31 €

1 Available 5 Days 81.6251613588521121.6257.6

186.09 €

1 Available 5 Days 102.031201501010021.5152.0319.5

248.92 €

1 Available 5 Days 122.438241601210821.5182.43811.5

Loading...

  1. 1

Specifications

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image

Model Number
TSC-MCR-LS-HFEM3S (3 Flutes)

Outer Diameter
D
Shoulder
Radius
R1
Base
Radius
R2
Approximate R-Value Flute Length
Under Neck Diameter
d1
Length Under Neck
ℓ1
Overall Length
L
Shank Diameter
d
Figure
4 0.5 4 0.813 8 3.8 35 80 6 1
6 0.5 9 1.219 10 5.7 70 120 6 1
8 1 12 1.625 16 7.6 85 135 8 2
10 1.5 15 2.031 20 9.5 100 150 10 2
12 1.5 18 2.438 24 11.5 108 160 12 2



For Cutting Conditions, Refer to >>Click here.

More Information


The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.


TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image

Basic information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron Number of Flutes(sheet) 3 Model High-Feed Radius
Processing Applications Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Powerful Helix (45° to 60°)
Additional Classification Stocked Product

Tech Support