TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular (Part Numbers)

TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

Click on this image to zoom in.

Click on this image to zoom in.

  • Volume Discount
[Features]
-Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium
-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible
-Wide flute design promotes chip flow.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular:Related Image
Part Number
TAC-FCESD3R5
TAC-FCESD3R6
TAC-FCESD3R6.5
TAC-FCESD3R6.8
TAC-FCESD3R7
TAC-FCESD3R8.5
TAC-FCESD3R9
TAC-FCESD3R10
TAC-FCESD3R12
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Hole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Overall Length L
(mm)
Shank Diameter d Diameter Tolerance Tolerance of Shank Diameter

72.95 €

1 Available 5 Days 544826+0.016 ~ +0.0040 ~ -0.008

78.32 €

1 Available 5 Days 644826+0.016 ~ +0.0040 ~ -0.008

99.95 €

1 Available 5 Days 6.553918+0.021 ~ +0.0060 ~ -0.009

103.95 €

1 Available 5 Days 6.853918+0.021 ~ +0.0060 ~ -0.009

99.47 €

1 Available 5 Days 753918+0.021 ~ +0.0060 ~ -0.009

124.99 €

1 Available 5 Days 8.56110310+0.021 ~ +0.0060 ~ -0.009

121.36 €

1 Available 5 Days 96110310+0.021 ~ +0.0060 ~ -0.009

114.29 €

1 Available 5 Days 106110310+0.021 ~ +0.0060 ~ -0.009

185.20 €

1 Available 5 Days 127111812+0.025 ~ +0.0070 ~ -0.011

Loading...

  1. 1

Specifications

TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular:Related Image

Model Number Groove Length
Overall Length
L
Shank Diameter
d
Diameter
D
TAC-FCESD3R544826
644826
6.553918
6.853918
753918
853918
8.56110310
96110310
106110310
10.37111812
127111812
137712414


For Cutting Conditions, Refer to >>Click here.

More Information


Its specialized form means that it exhibits superior cutting performance with gray cast iron and ductile cast iron, as well as non-ferrous metals such as aluminum alloy, brass, magnesium, etc.
Drilling can be done without centering by using a spiral-pointed shape for the tip chisel portion.
The discharge of cutting chips is promoted using a groove with a wide design.
[ ! ]Refer to page 759 for information about the advantages of a diameter plus tolerance.

TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular:Related Image

Basic information

work material Cast Iron / Aluminum / Copper Tool Material Type Carbide Shank Type End Mill Shank
Coating Y/N Included Coating Type TiAlN With/without Oil Hole None
Point Angle(°) 130 Thinning Included

Tech Support