Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model (Part Numbers)
-Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Tool Diameter (mm) | Groove Length (mm) | No. | Bottom Blade Shape | Diameter Tolerance (mm) | Shank Diameter d (mm) | Number of Flutes (Sheet(s)) | Overall Length L (mm) | Neck Length (ℓ1) (mm) | Number of Flutes | Radius (R) (mm) | Length Under Neck ℓ2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 Days | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 2.8 | - | ||
| 1 | 8 Days | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | 5 ～ 20 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Days | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | 5 ～ 20 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 35 | ||
| 1 | 8 Days | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 Days | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 7 Days | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 2.8 | - | ||
| 1 | 7 Days | 4.005 ～ 7.995 | 4 ～ 28 | 8 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 8 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 3.8 | - | ||
| 1 | 7 Days | 6.005 ～ 9.995 | 5 ～ 35 | 10 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 10 | 4 | 80 | - | 2 ～ 4 | 0.1 ～ 4.8 | - | ||
| 1 | 7 Days | 8.005 ～ 11.995 | 6 ～ 36 | 12 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 12 | 4 | 80 | - | 2 ～ 4 | 0.1 ～ 5.8 | - | ||
| 1 | 7 Days | 10.005 ～ 15.995 | 8 ～ 48 | 16 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 16 | 4 | 100 | - | 2 ～ 4 | 0.1 ～ 7.8 | - | ||
| 1 | 8 Days | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | 5 ～ 20 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Days | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | 5 ～ 20 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 Days | 2 ～ 3.995 | 0.5 ～ 20 | 4 | T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 35 |
Loading...
Specifications
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | Shank Diameter d | |
| No. | ||||||||
| SEC-RMSRC SEC-HP-RMSRC (No.3 ~ No.6 only can be designated) | 3 | 2 | 0.400 ~ 0.495 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 1.0 | T (Dished) F (Flat) >>P.994 | 40 | 3 |
| 3 | 2 | 0.500 ~ 1.500 | 0.5 ~ 5.0 | 40 | 3 | |||
| 3 | 2 | 1.505 ~ 2.000 | 0.5 ~ 10.0 | 40 | 3 | |||
| 3 | 2 | 2.005 ~ 2.995 | 0.5 ~ 15.0 | 40 | 3 | |||
| 4 | 2 | 2.005 ~ 3.995 | 0.5 ~ 20.0 | 50 | 4 | |||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 24.0 | 60 | 6 | |||
| 8 | 4.005 ~ 7.995 | 4.0 ~ 28.0 | 60 | 8 | ||||
| 10 | 6.005 ~ 9.995 | 5.0 ~ 35.0 | 80 | 10 | ||||
| 12 | 8.005 ~ 11.995 | 6.0 ~ 36.0 | 80 | 12 | ||||
| 16 | 10.005 ~ 15.995 | 8.0 ~ 48.0 | 100 | 16 |
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Neck Length ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | Length Under Neck Specified Range ℓ2 | Overall Length L | Shank Diameter d | |
| No. | ||||||||||
| SEC-RMSRCZ SEC-HP-RMSRCZ | 3 | 2 | 2.000 ~ 2.995 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 15.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) | ℓ + ℓ1 ≤ 20 | 40 | 3 |
| 4 | 2 | 2.000 ~ 3.995 | 0.5 ~ 20.0 | ℓ + ℓ1 ≤ 25 | 50 | 4 | ||||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 24.0 | ℓ + ℓ1 ≤ 35 | 60 | 6 |
For Cutting Conditions, Refer to >>Click here.
Alterations
| Model Number | Coating Addition |
| SEC-RMSRC | ○ |
| SEC-RMSRCZ | ○ |
| SEC-HP-RMSRC | - |
| SEC-HP-RMSRCZ | - |
Coating
How to Order / Charge Details >>Click here.
Basic information
| Shank type | End Mill Shank | Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper | Coating Presence | None |
|---|---|---|---|---|---|
| Groove Shape | Straight | Base-Blade Availability | Included | Tool Material Type | Carbide |
Configure
Basic Attributes
-
Tool Diameter(mm)
-
Groove Length(mm)
-
No.
- 3
- 4
- 6
- 8
- 10
- 12
- 16
-
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
-
Diameter Tolerance(mm)
-
Shank Diameter d(mm)
-
Number of Flutes(Sheet(s))
- 2
- 4
-
Overall Length L(mm)
-
Neck Length (ℓ1)(mm)
-
Number of Flutes
-
Radius (R)(mm)
-
Type
- SEC-HP-RMSRC
- SEC-HP-RMSRCZ
- SEC-RMSRC
- SEC-RMSRCZ
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.