Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
-Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
-Long type enables machining of deep holes.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Tool Diameter (mm) | Groove Length (mm) | No. | Bottom Blade Shape | Diameter Tolerance (mm) | Shank Diameter d (mm) | Overall Length L (mm) | Neck Length (ℓ1) (mm) | Number of Flutes | Radius (R) (mm) | Length Under Neck ℓ2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 60 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 Days | 2.005 ～ 3.995 | 0.5 ～ 30 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 80 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 34 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 100 | - | 2 ～ 4 | 0.1 ～ 2.89 | - | ||
| 1 | 8 Days | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 60 | 5 ～ 45 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Days | 2 ～ 3.995 | 0.5 ～ 30 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 80 | 5 ～ 45 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 50 | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 34 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 100 | 5 ～ 45 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 70 | ||
| 1 | 8 Days | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 60 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 Days | 2.005 ～ 3.995 | 0.5 ～ 30 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 80 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 34 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 100 | - | 2 ～ 4 | 0.1 ～ 2.89 | - | ||
| 1 | 8 Days | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 60 | 5 ～ 45 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Days | 2 ～ 3.995 | 0.5 ～ 30 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 80 | 5 ～ 45 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 50 | ||
| 1 | 8 Days | 3.005 ～ 5.995 | 3 ～ 34 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 100 | 5 ～ 45 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 70 |
Loading...
Specifications
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | Shank Diameter d | |
| No. | ||||||||
| SEC-RMSRCL SEC-HP-RMSRCL | 3 | 2 | 0.400 ~ 0.495 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 1.0 | T (Dished) F (Flat) >>P.994 | 60 | 3 |
| 3 | 2 | 0.500 ~ 1.500 | 0.5 ~ 5.0 | 60 | 3 | |||
| 3 | 2 | 1.505 ~ 2.000 | 0.5 ~ 10.0 | 60 | 3 | |||
| 3 | 2 | 2.005 ~ 2.995 | 0.5 ~ 15.0 | 60 | 3 | |||
| 4 | 2 | 2.005 ~ 3.995 | 0.5 ~ 30.0 | 80 | 4 | |||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 34.0 | 100 | 6 |
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Neck Length ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | Length Under Neck Specified Range ℓ2 | Overall Length L | Shank Diameter d | |
| No. | ||||||||||
| SEC-RMSRCLZ SEC-HP-RMSRCLZ | 3 | 2 | 2.000 ~ 2.995 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 15.0 | 5 ≤ ℓ1 ≤ 45 | T (Dished) F (Flat) | ℓ + ℓ1 ≤ 20 | 60 | 3 |
| 4 | 2 | 2.000 ~ 3.995 | 0.5 ~ 30.0 | ℓ + ℓ1 ≤ 50 | 80 | 4 | ||||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 34.0 | ℓ + ℓ1 ≤ 70 | 100 | 6 |
For Cutting Conditions, Refer to >>Click here.
More Information
Alterations
| Model Number | Coating Addition |
| SEC-RMSRCL | ○ |
| SEC-RMSRCLZ | ○ |
| SEC-HP-RMSRCL | - |
| SEC-HP-RMSRCLZ | - |
Coating
How to Order / Charge Details >>Click here.
Basic information
| Shank type | End Mill Shank | Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper | Coating Presence | None |
|---|---|---|---|---|---|
| Groove Shape | Straight | Base-Blade Availability | Included | Tool Material Type | Carbide |
Configure
Basic Attributes
-
Tool Diameter(mm)
-
Groove Length(mm)
-
No.
- 3
- 4
- 6
-
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
-
Diameter Tolerance(mm)
-
Shank Diameter d(mm)
-
Overall Length L(mm)
-
Neck Length (ℓ1)(mm)
-
Number of Flutes
-
Radius (R)(mm)
-
Type
- SEC-HP-RMSRCL
- SEC-HP-RMSRCLZ
- SEC-RMSRCL
- SEC-RMSRCLZ
Filter by standard shipping days
-
- All
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.