• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Plain bearing bushes with flange / plastic (iglidur) / WFM (WFM-0204-03)

Plain bearing bushes with flange / plastic (iglidur) / WFM WFM-0204-03

Click on this image to zoom in.

Click on this image to zoom in.

  • WFM-0204-03 to WFM-7075-100
  • WFM-7580-100 to WFM-9095-100
  • Promotional pricing ends 30/11/2024
  • Volume Discount

IGUS

IGUS

Product Details:

Manufacturer part number: WFM-0204-03

Brand: IGUS

Price: 4.74 €

Delivery time: 2 Days


Technical Data:

Type: -

Environment: -

Inner Diameter d1: - mm

O.D. d2: - mm

Overall Length b1: - mm


Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

WFM-0204-03

iglidur® W300 | The Classic Endurance Runner up to 30 MPa, Flange Bearing (Form F)

Product Information


Excellent wear resistance on (virtually) all shafts
The iglidur® W300 material gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these conditions.
When to use it?
• When especially high service life is necessary
• When low coefficients of dynamic friction and high wear resistance are needed
• For use on 304 stainless steel shafts
• For harsh environments and very rough shafts
• Dirt resistant
When not to use it?
• For high loads starting at 50 MPa
  ►iglidur® Q
• When constant temperatures exceed +90°C
  ►iglidur® H
  ►iglidur® X
• For very wet environments
  ►iglidur® P
• When an economical bearing is required
  ►iglidur® G
Typical application areas
• Automation
• Printing industry
• Woodworking
• Mechatronics
• Test engineering and quality assurance

Material Properties

General propertiesUnitiglidur® W300Testing method
Densityg/cm31.24 
Colour yellow 
Max. moisture absorption at +23°C/50% r.h.% weight1.3DIN 53495
Max. water absorption% weight6.5 
Coefficient of sliding friction, dynamic, against steelμ0.08–0.23 
pv value, max. (dry)MPa · m/s0.23 
Mechanical properties
Flexural modulusMPa3,500DIN 53457
Flexural strength at +20°CMPa125DIN 53452
Compressive strengthMPa61 
Max. recommended surface pressure (+20°C)MPa60 
Shore-D hardness 77DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+90 
Max. short-term application temperature°C+180 
Min. long-term application temperature°C–40 
Heat conductivityW/m · K0.24ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–59DIN 53752
Electrical properties
Specific contact resistanceΩcm> 1013DIN IEC 93
Surface resistanceΩ> 1012DIN 53482

Dimensions

Flange Bearing (Form F)

2) Thickness < 1 mm: chamfer = 20°
Chamfer in relation to the d1    
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
2.5+0.014
+0.054		4.06.53.00.75WFM-0204-03
3.04.57.53.00.75WFM-0304-03
3.04.57.55.00.75WFM-0304-05
4.0+0.020
+0.068		5.59.53.00.75WFM-0405-03
4.05.59.54.00.75WFM-0405-04
4.05.59.56.00.75WFM-0405-06
5.0+0.010
+0.040		6.010.08.00.50WFM-0506-08
5.0+0.020
+0.068		7.011.04.01.00WFM-0507-04
5.07.011.05.01.00WFM-0507-05
6.08.012.04.01.00WFM-0608-04
6.08.012.06.01.00WFM-0608-06
6.08.012.08.01.00WFM-0608-08
6.08.012.010.01.00WFM-0608-10
6.08.012.015.01.00WFM-0608-15
7.0+0.025
+0.083		9.015.010.01.00WFM-0709-10
7.09.015.012.01.00WFM-0709-12
8.010.015.02.71.00WFM-0810-02
8.010.015.04.01.00WFM-0810-04
8.010.015.05.51.00WFM-0810-05
8.010.015.07.51.00WFM-0810-07
8.010.015.09.51.00WFM-0810-09
8.010.015.010.01.00WFM-0810-10
8.010.015.023.01.00WFM-0810-23
8.010.015.030.01.00WFM-0810-30
8.010.015.05.01.00WFM-081015-05
10.012.018.04.01.00WFM-1012-04
10.012.018.05.01.00WFM-1012-05
10.012.018.06.01.00WFM-1012-06
10.012.018.07.01.00WFM-1012-07
10.012.018.09.01.00WFM-1012-09
10.012.018.010.01.00WFM-1012-10
10.012.018.012.01.00WFM-1012-12
10.012.018.015.01.00WFM-1012-15
10.012.018.017.01.00WFM-1012-17
12.0+0.032
+0.102		14.020.04.01.00WFM-1214-04
12.014.020.04.41.00WFM-1214-044
12.014.020.06.01.00WFM-1214-06
12.014.020.07.01.00WFM-1214-07
12.014.020.09.01.00WFM-1214-09
12.014.020.010.01.00WFM-1214-10
12.014.020.011.01.00WFM-1214-11
12.014.020.012.01.00WFM-1214-12
12.014.020.015.01.00WFM-1214-15
12.014.020.017.01.00WFM-1214-17
12.014.020.020.01.00WFM-1214-20
13.015.022.06.01.00WFM-1315-06
14.016.022.04.01.00WFM-1416-04
14.016.022.05.01.00WFM-1416-05
14.016.022.08.01.00WFM-1416-08
14.016.022.012.01.00WFM-1416-12
14.016.022.017.01.00WFM-1416-17
14.016.022.029.01.00WFM-1416-29
15.017.023.09.01.00WFM-1517-09
15.017.023.012.01.00WFM-1517-12
15.017.023.017.01.00WFM-1517-17
15.017.023.020.01.00WFM-1517-20
16.018.024.09.01.00WFM-1618-09
16.018.024.012.01.00WFM-1618-12
16.018.024.017.01.00WFM-1618-17
17.019.025.012.01.00WFM-1719-12
17.019.025.018.01.00WFM-1719-18
17.019.025.025.01.00WFM-1719-25
18.020.026.06.01.00WFM-1820-06
18.020.026.012.01.00WFM-1820-12
18.020.026.017.01.00WFM-1820-17
18.020.026.022.01.00WFM-1820-22
20.0+0.040
+0.124		23.030.011.51.50WFM-2023-11
20.023.030.014.51.50WFM-2023-14
20.023.030.016.51.50WFM-2023-16
20.023.030.021.51.50WFM-2023-21
24.027.032.010.51.50WFM-2427-10
25.028.035.011.51.50WFM-2528-11
25.028.035.016.51.50WFM-2528-16
25.028.035.021.01.50WFM-2528-21
25.028.032.030.01.50WFM-2528-30
25.028.031.013.51.50WFM-252831-13
28.030.035.036.01.00WFM-2830-36
30.034.042.010.02.00WFM-3034-10
30.034.042.016.02.00WFM-3034-16
30.034.042.026.02.00WFM-3034-26
30.034.042.037.02.00WFM-3034-37
32.0+0.050
+0.150		36.040.016.02.00WFM-3236-16
32.036.040.026.02.00WFM-3236-26
35.039.047.09.02.00WFM-3539-09
35.039.047.016.02.00WFM-3539-16
35.039.047.026.02.00WFM-3539-26
35.039.050.035.02.00WFM-353950-35
38.042.050.022.02.00WFM-3842-22
40.044.052.030.02.00WFM-4044-30
40.044.052.040.02.00WFM-4044-40
45.050.058.050.02.00WFM-4550-50
50.055.063.040.02.00WFM-5055-40
50.055.063.050.02.00WFM-5055-50
55.0+0.060
+0.180		60.068.060.02.00WFM-5560-60
57.062.067.040.02.00WFM-5762-40
60.065.073.060.02.00WFM-6065-60
65.070.078.060.02.00WFM-6570-60
70.075.083.0100.02.50WFM-7075-100
75.080.088.0100.02.50WFM-7580-100
80.085.093.0100.02.50WFM-8085-100
90.0+0.072
+0.212		95.0103.0100.02.50WFM-9095-100
100.0105.0113.0100.02.50WFM-100105-100
120.0125.0133.0100.02.50WFM-120125-100
3) After press-fit.
 
Data to be displayed
30
45
60
  1. 1
Part Number
WFM-0204-03
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Maximum Allowable PV Value
(N/mm²·m/s) 		Max. Allowable Surface Pressure P
(N/mm2) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Recommended Housing Hole Tolerance Thickness t
(mm) 		Flange Outer Diameter d3
(mm)

4.74 €

1 Available 2 Days 10-------------

Loading...

  1. 1
 

Basic information

Resin Group High Performance Polymer Group Lubrication Condition Unlubricated

This page is Plain bearing bushes with flange / plastic (iglidur) / WFM, part number WFM-0204-03.
You can find the detail information about specifications and dimensions on part number WFM-0204-03.

Configure

Clear all

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • Flanged Type

    Clear

  • Environment

    • Standard
    • Foreign Object Resistant
    • Vibration Resistant
    • In Water
    • In Seawater
    • In Chemical

    Clear

  • Inner Diameter d1(mm)

    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 25
    • 30
    • 32
    • 35
    • 38
    • 40
    • 45
    • 50
    • 55
    • 57
    • 65
    • 70
    • 75
    • 80
    • 90
    • 100
    • 120

    Clear

  • O.D. d2(mm)

    • 4.5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 23
    • 28
    • 34
    • 36
    • 39
    • 42
    • 44
    • 50
    • 55
    • 60
    • 62
    • 70
    • 75
    • 80
    • 85
    • 95
    • 105
    • 125

    Clear

  • Overall Length b1(mm)

    • 2.7
    • 3
    • 4
    • 4.4
    • 5
    • 5.5
    • 6
    • 7
    • 7.5
    • 8
    • 9
    • 9.5
    • 10
    • 11
    • 11.5
    • 12
    • 13
    • 14
    • 15
    • 16
    • 16.5
    • 17
    • 18
    • 20
    • 21
    • 21.5
    • 22
    • 23
    • 25
    • 26
    • 29
    • 30
    • 35
    • 37
    • 40
    • 50
    • 60
    • 100

    Clear

  • Maximum Allowable PV Value Range(N/mm2•m/s)

    • 0.10 to 0.29

    Clear

  • Maximum Allowable PV Value(N/mm²·m/s)

    • 0.12
    • 0.23

    Clear

  • Max. Allowable Surface Pressure P(N/mm2)

    • 20
    • 60

    Clear

  • Max. Allowable Velocity V(m/s)

    • 0.8
    • 6

    Clear

  • Recommended Shaft Tolerance

    • h9

    Clear

  • Recommended Housing Hole Tolerance

    • H7

    Clear

  • Thickness t(mm)

    • 1
    • 1.5
    • 2
    • 2.5

    Clear

  • Flange Outer Diameter d3(mm)

    • 7.5
    • 9.5
    • 10
    • 11
    • 12
    • 15
    • 18
    • 20
    • 22
    • 23
    • 24
    • 25
    • 26
    • 30
    • 31
    • 35
    • 40
    • 42
    • 47
    • 50
    • 52
    • 58
    • 63
    • 67
    • 68
    • 78
    • 83
    • 88
    • 93
    • 103
    • 113
    • 133

    Clear

  • Type

    • WFM

    Clear

  • Filter by CAD data type

    • 3D

    Clear

Filter by standard shipping days

    • All
    • Same day
    • 2 Days or Less
    • 3 Days or Less
    • 4 Days or Less

    Reset

Optional Attributes

Variation of this product

Part Number
WFM-0304-03
WFM-0304-05
WFM-0405-03
WFM-0405-04
WFM-0405-06
WFM-0506-08
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?		RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Maximum Allowable PV Value
(N/mm²·m/s) 		Max. Allowable Surface Pressure P
(N/mm2) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Recommended Housing Hole Tolerance Thickness t
(mm) 		Flange Outer Diameter d3
(mm)

4.74 €

1 Available 2 Days -Flanged TypeStandard34.530.10 to 0.290.12200.8h9--7.5

4.74 €

1 Available 2 Days -Flanged TypeStandard34.550.10 to 0.290.12200.8h9--7.5

4.74 €

1 Available 2 Days -Flanged TypeStandard45.530.10 to 0.290.12200.8h9--9.5

4.74 €

1 Available 2 Days -Flanged TypeStandard45.540.10 to 0.290.12200.8h9--9.5

4.74 €

1 Available 2 Days -Flanged TypeStandard45.560.10 to 0.290.12200.8h9--9.5

4.92 €

1 Available 2 Days -Flanged TypeStandard5680.10 to 0.290.12200.8h9--10

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.