Goniometer Fixed Stage 25 × 25 (Part Numbers)
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· Small, with a surface size of 25 mm square, and can comprise 6 axes.
· Combine with a single-axis inclination stage with a different rotation center height to create a 2-axis inclination stage with the same rotation center.
· Can be installed horizontally, vertically or upside-down.
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· Small, with a surface size of 25 mm square, and can comprise 6 axes.
· Combine with a single-axis inclination stage with a different rotation center height to create a 2-axis inclination stage with the same rotation center.
· Can be installed horizontally, vertically or upside-down.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Loading...
Basic information
| Type | Goniometer X Axis | Stage surface (length) (range of selection)(mm) | Up to 25 | Stage surface (width) (range of selection)(mm) | Up to 25 |
|---|---|---|---|---|---|
| Load Capacity (Range Selectable)(N) | 1 to 4.9 | Feeding Method | Feed Screw | Table Material | Aluminum Alloy |
| Table Surface Treatment | Black Anodized Aluminum Satin | Guiding Mechanism | ground glass joint | Stage surface (length)(mm) | 25 |
| Stage surface (width)(mm) | 25 | Allowable Load(N) | 4.9 | Through Hole (Table Center Hole) | NA |
| Stroke (θ Angle)(deg) | ±2 | Clamp Method | NA | Moving Direction | Tilt in 1 direction |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.