Hex Head Screws SNHS-HTF (Part Numbers)
● To increase chemical resistance, the coating membrane is thickened (to approximately 50 µm). The screw thread is not coated, so thread precision is not affected.
(i)Remark
- Friction during tightening may remove the coating. Take care not to tighten too much. Apply the recommended torque or lower for tightening.
- For tightening, use a socket wrench with a hexagonal socket.
- The product shown in the image is a representative image only. See product standards for details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SNHS-M3X6-HTF
- Product data
- CAD data not available
Basic information
| Detailed Shape | Standard | Material | Stainless Steel | Surface Treatment | No |
|---|---|---|---|---|---|
| Mounting Hole Shape | No | Additional Shape | Standard | Thread Type | Metric coarse |
| Sales Unit | Low Quantity (can be purchased from one) | Application | Chemical Resistance | Screw Type | Complete thread |
| Specifications | fluoropolymer-coated head |
This page is Hex Head Screws SNHS-HTF, part number SNHS-M3X6-HTF.
You can find the detail information about specifications and dimensions on part number SNHS-M3X6-HTF.
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SNHS-M3X10-HTF |
| SNHS-M3X12-HTF |
| SNHS-M3X16-HTF |
| SNHS-M3X8-HTF |
| SNHS-M4X10-HTF |
| SNHS-M4X12-HTF |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Screw Nominal (M) | Length L (mm) | Pitch (mm) | Recommended tightening torque (N·m) |
|---|---|---|---|---|---|---|---|---|
8.09 € | 1 | 8 Days | 3 | 10 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 3 | 12 | 0.5 | 0.5 | ||
8.26 € | 1 | 8 Days | 3 | 16 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 3 | 8 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 4 | 10 | 0.7 | 1.1 | ||
8.26 € | 1 | 8 Days | 4 | 12 | 0.7 | 1.1 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.