Hex Head Screws SNHS-HTF (Part Numbers)
● To increase chemical resistance, the coating membrane is thickened (to approximately 50 µm). The screw thread is not coated, so thread precision is not affected.
(i)Remark
- Friction during tightening may remove the coating. Take care not to tighten too much. Apply the recommended torque or lower for tightening.
- For tightening, use a socket wrench with a hexagonal socket.
- The product shown in the image is a representative image only. See product standards for details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Screw Nominal (M) | Length L (mm) | Pitch (mm) | Recommended tightening torque (N·m) | |
|---|---|---|---|---|---|---|---|---|
8.09 € | 1 | 8 Days | 3 | 6 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 3 | 8 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 3 | 10 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 3 | 12 | 0.5 | 0.5 | ||
8.26 € | 1 | 8 Days | 3 | 16 | 0.5 | 0.5 | ||
8.09 € | 1 | 8 Days | 4 | 8 | 0.7 | 1.1 | ||
8.09 € | 1 | 8 Days | 4 | 10 | 0.7 | 1.1 | ||
8.26 € | 1 | 8 Days | 4 | 12 | 0.7 | 1.1 | ||
8.28 € | 1 | 8 Days | 4 | 16 | 0.7 | 1.1 | ||
8.28 € | 1 | 8 Days | 4 | 20 | 0.7 | 1.1 | ||
8.28 € | 1 | 8 Days | 5 | 10 | 0.8 | 2.2 | ||
8.28 € | 1 | 8 Days | 5 | 12 | 0.8 | 2.2 | ||
8.64 € | 1 | 8 Days | 5 | 16 | 0.8 | 2.2 | ||
8.64 € | 1 | 8 Days | 5 | 20 | 0.8 | 2.2 | ||
8.81 € | 1 | 8 Days | 5 | 25 | 0.8 | 2.2 | ||
8.64 € | 1 | 8 Days | 6 | 12 | 1 | 3.8 | ||
8.82 € | 1 | 8 Days | 6 | 16 | 1 | 3.8 | ||
8.82 € | 1 | 8 Days | 6 | 20 | 1 | 3.8 | ||
9.03 € | 1 | 8 Days | 6 | 25 | 1 | 3.8 | ||
9.03 € | 1 | 8 Days | 6 | 30 | 1 | 3.8 | ||
9.74 € | 1 | 8 Days | 8 | 16 | 1.25 | 9.2 | ||
9.76 € | 1 | 8 Days | 8 | 20 | 1.25 | 9.2 | ||
10.29 € | 1 | 8 Days | 8 | 25 | 1.25 | 9.2 | ||
10.46 € | 1 | 8 Days | 8 | 30 | 1.25 | 9.2 | ||
10.64 € | 1 | 8 Days | 8 | 35 | 1.25 | 9.2 |
Loading...
Basic information
| Detailed Shape | Standard | Material | Stainless Steel | Surface Treatment | No |
|---|---|---|---|---|---|
| Mounting Hole Shape | No | Additional Shape | Standard | Thread Type | Metric coarse |
| Sales Unit | Low Quantity (can be purchased from one) | Application | Chemical Resistance | Screw Type | Complete thread |
| Specifications | fluoropolymer-coated head |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.