• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

CY3R, Magnetically Coupled Rodless Cylinder (with Switch Rail)

CY3R, Magnetically Coupled Rodless Cylinder (with Switch Rail)

SMC

SMC

An air slide table made by SMC

[Features]
· A further upgrade from the CY1 series
· The installation dimensions are the same as the CY1 series, yet it features improved bearing performance and reduced sliding resistance.
· NPT screws and G screws are standardized

(i)Remark

  • Refer to the catalog for product specifications.
  • Product pictures are representations. CAD data is not supported by some of the model numbers.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing

Both sides piping type: ⌀6 (diameter 6 mm) to ⌀63 (diameter 63 mm) Dimensional drawing

Both sides piping type: ⌀6 (diameter 6 mm) Up to ⌀63 (Diameter 63 mm)

Note 1) ⌀50 (diameter 50 mm) and ⌀63 (diameter 63 mm) are L (-0.2 to 0).

Product Specifications

Magnet Type Rodless Cylinder, Direct Mount Type CY3R Series product image

Product Image

Specifications

Bore size (mm)61015202532405063
FluidAir
Proof Pressure1.05 MPa
Maximum operating pressure0.7 MPa
Minimum operating pressure0.160.160.160.160.150.140.120.120.12
Ambient and fluid temperature-10°C to 60°C (no freezing)
Note) Piston speed50 to 500 mm/s
CushionRubber bumper
LubricationNot required (non-lubricated)
Stroke length tolerance (mm)0 to 250 st: (0 to +1.0), 251 to 1,000 st: (0 to +1.4), 1,001 st and above: (0 to +1.8)
Mounting methodsDirect mount type
Mounting orientationHorizontal, inclined, verticalNote2)
Magnetic holding force (N)19.653.91372313635889221,4712,256

Note 1) if the auto switch is installed and the auto switch is set at the intermediate position, the maximum piston speed should be within 300 mm/s due to the relay etc.
Note 2) in the case of vertical mounting, intermediate stop by the pneumatic circuit is not possible.

Applicable auto switches

Auto Switch Unit Part NumberTypeSpecial FunctionsElectrical EntryIndicator lightWiring (Output)Load voltage
DCAC
M9NSolid State Auto Switch—GrommetYes3-wire (NPN)24 V5 V, 12 V—
M9P3-wire (PNP)
M9B2-wire12 V
M9NWDiagnostic indication (2-color indicator)3-wire (NPN)5 V, 12 V
M9PW3-wire (PNP)
M9BW2-wire12 V
* 1M9NAWater-resistant
(2-color indicator)		3-wire (NPN)5 V, 12 V
* 1M9PA3-wire (PNP)
* 1M9BA2-wire12 V
A96Reed type auto switch—GrommetYes3-wire (NPN equivalent)—5 V—
A932-wire24 V5 V, 12 V100 V
A90No100 V or less
Auto Switch Unit Part NumberLead Wire Length (m)Pre-Wired ConnectorApplicable load
0.5
(Nil)		1
(M)		3
(L)		5
(Z)
M9N●●●○○IC circuitRelay, PLC
M9P●●●○○
M9B●●●○○—
M9NW●●●○○IC circuit
M9PW●●●○○
M9BW●●●○○—
* 1M9NA○○●○○IC circuit
* 1M9PA○○●○○
* 1M9BA○○●○○—
A96●—●——IC circuit—
A93●●●●—Relay, PLC
A90●—●———
  1. * 1The water resistant type auto switch can be mounted on the above models, but it does not guarantee the water-resistant performance of the product. Check with the manufacturer regarding water-resistant types for the above model numbers.
  • * Lead wire length symbol 0.5 m··No symbol (example) M9NW/1 m: M (example) M9NWM/3 m: L (example) M9NWL/5 m: Z (example) M9NWZ
  • *Solid state auto switches marked with ○ are produced to order.
  • *Auto switches are shipped together (but not assembled).

Diagram Examples

Structural drawing of double-sided piping

Both sides piping type

Components

NumberPart NameMaterialNotes
1BodyAluminum alloyHard anodized
2aEnd cover AAluminum alloy—
2bEnd cover CAluminum alloy—
3aEnd cover BAluminum alloy—
3bEnd cover DAluminum alloy—
4Cylinder tubeStainless steel—
5Pistonø6 (diameter 6 mm)Brassø6 (diameter 6 mm)Electroless nickel plating
⌀10 to 63 (Diameter 10-63 mm)Aluminum alloy⌀10 to 63 (Diameter 10-63 mm)Chromated
6ShaftStainless steel—
7Piston-side yokeRolled steel plateZinc chromated
8External slider side yokeRolled steel plateZinc chromated
9Magnet A——
10Magnet B——
11SpacerAluminum alloy⌀6 (diameter 6 mm) None
12BumperUrethane rubber—
13Piston NutCarbon steelZinc chromated (⌀6-15 (diameter 6-15 mm) none)
14Type C retaining ring for holeCarbon tool steelPhosphate Coated
15Attachment ringAluminum alloyChromated
16Type C retaining ring for shaftHigh carbon steel wire material—
17Magnetic shielding plateRolled steel plateBright chromated (without ø6 (diameter: 6 mm), ø10 (diameter: 10 mm))
18aSwitch rail (both sides piping)Aluminum alloyWhite anodized
18bSwitch rail (Centralized piping)Aluminum alloyWhite anodized
19Magnet——
20Hexagon socket head plugChromium steelNickel plated
21Steel ballChromium steel⌀40 (Diameter 40 mm)Hexagon socket head plug
⌀20 (diameter 20 mm), ⌀50 (diameter 50 mm), ⌀63 (Diameter 63 mm)None
22Hex socket head screwChromium steelNickel plated
23Hex socket head set screwChromium steelNickel plated
24Cylinder tube gasketNBR—
25Wear ring ASpecial resin⌀6 (diameter 6 mm): not available
26Wear ring BSpecial resin—
27Wear ring CSpecial resin—
28Piston sealNBR—
29LubretainerSpecial resin⌀6 (diameter 6 mm): not available
30Switch rail gasketNBRBoth sides piping: None

Specification Table

ModelABCCBCRDFGGPGWHHAHBHCHPHRHSHTJ × E
CY3R67* -* -* 20.57.65.53* 2018.5191710.51810.5* 17610.5* M4 × 0.7 × 6
CY3R1096.53.220.5126.542725.5262414251424514M4 × 0.7 × 6
CY3R1510.584.220.516.6* 853331.53230173117308.517M5 × 0.8 × 7
CY3R2099.55.23121.6* 963937.53936213824367.524M6 × 1 × 8
CY3R258.59.55.23126.4* 8.564442.5444123.54323.5416.523.5M6 × 1 × 8
CY3R3210.5116.531.533.6* 10.575553.5555229542951729M8 × 1.25 × 10
CY3R4010116.55241.6* 1376563.5676236663662836M8 × 1.25 × 10
CY3R5014148.25252.4* 178.58381.5858045844580945M10 × 1.5 × 15
CY3R6315148.25365.4* 188.59593.59792519651909.551M10 × 1.5 × 15
ModelKLLDMMMNPWQQWTTCWWPWSXYZ
CY3R67343.53.5M3 × 0.53.51960* 1014.5* 10.5209.561035.566*
CY3R109383.54M3 × 0.54.526681417.514201381539.576
CY3R1514534.35M4 × 0.763284181917251671854.594
CY3R2011625.45M4 × 0.7738951720.520401972264107
CY3R2515705.46M5 × 0.86.5431052021.522.54021.572872117
CY3R32137677M6 × 18.554116262428502773579130
CY3R40159078M6 × 11164134342633603274093148
CY3R50251108.610M8 × 1.25158215948304260411050113176
CY3R63241188.610M8 × 1.25169417160324870471060121188
ModelP (piping port)
BlankTN* TF*
CY3R6M3 × 0.5* ——
CY3R10M5 × 0.8——
CY3R15M5 × 0.8——
CY3R20Rc 1/8NPT1/8G1/8
CY3R25Rc 1/8NPT1/8G1/8
CY3R32Rc 1/8NPT1/8G1/8
CY3R40Rc 1/4NPT1/4G1/4
CY3R50Rc 1/4NPT1/4G1/4
CY3R63Rc 1/4NPT1/4G1/4

*2) * The mark shows the dimensions different from the CY1R series.

Selection support information

Model Number Notation

Model number examples

Model number examples

Data to be displayed
30
45
60
  1. 1
Part Number
CY3R20-1100
CY3R20-1100N
CY3R25-1100
CY3R25TF-1100
CY3R32-1100
CY3R32-1100N
CY3R32TF-1100
CY3R40-1100
CY3R40-1100-M9BW
CY3R40-1100N
CY3R50-1100
CY3R50-1100N
CY3R50TF-1100
CY3R63TF-1100
CY3RG20-1100
CY3RG25-1100
CY3RG25TF-1100
CY3RG32-1100
CY3RG40-1100
CY3RG50-1100
CY3RG50TF-1100
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Type Stroke
(mm) 		Table Material Maximum load weight (when horizontally mounted)
(kg) 		Max. Load Mass
(kg) 		Table Size Length L
(mm) 		Cylinder Inner Diameter
(Ø) 		Rodless Cylinder Joint Type Usage Environment Table Surface Treatment Guide Table Size Width W
(mm) 		Table Size Height H
(mm) 		Operating Pressure
(MPa) 		Piping Format Port Screw Type Cushion Auto Switch Lead Wire Length
(m) 		Number of Switches Custom-made Specifications End Block Model Stroke Adjustment Unit Symbol Custom-made Type Applicable inner diameter of cylinder
(ø)

563.03 €

1 16 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.16220MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount37.5 ～ 3939-Standard typeRcRubber cushionYesMagnet built-inNone---0.16 to 0.7None--

518.89 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.16220MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount37.5 ～ 3939-Standard typeRcRubber cushionNoneMagnet built-inNone---0.16 to 0.7None--

709.16 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.27025MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount42.544-Standard typeRcRubber cushionYesMagnet built-inNone---0.15 to 0.7None--

709.16 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.27025MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount42.544-Standard typeGRubber cushionYesMagnet built-inNone---0.15 to 0.7None--

921.03 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.57632MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount53.555-Standard typeRcRubber cushionYesMagnet built-inNone---0.14 to 0.7None--

876.89 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.57632MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount53.555-Standard typeRcRubber cushionNoneMagnet built-inNone---0.14 to 0.7None--

921.03 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.57632MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount53.555-Standard typeGRubber cushionYesMagnet built-inNone---0.14 to 0.7None--

1,107.39 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.929040MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount63.567-Standard typeRcRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

1,175.02 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.929040MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount63.567-Standard typeRcRubber cushionYesMagnet built-inM9BW0.5-20.12 to 0.7None--

1,060.29 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.929040MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount63.567-Standard typeRcRubber cushionNoneMagnet built-inNone---0.12 to 0.7None--

1,776.27 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.92.511050MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount81.585-Standard typeRcRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

1,705.66 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.92.511050MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount81.585-Standard typeRcRubber cushionNoneMagnet built-inNone---0.12 to 0.7None--

1,776.27 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.92.511050MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount81.585-Standard typeGRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

2,049.94 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.9311863MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount93.5 ～ 9797-Standard typeGRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

564.98 €

1 16 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.16220MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount37.5 ～ 3939-Centralized piping typeRcRubber cushionYesMagnet built-inNone---0.16 to 0.7None--

711.11 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.27025MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount42.544-Centralized piping typeRcRubber cushionYesMagnet built-inNone---0.15 to 0.7None--

711.11 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.27025MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount42.544-Centralized piping typeGRubber cushionYesMagnet built-inNone---0.15 to 0.7None--

923.02 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.91.57632MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount53.555-Centralized piping typeRcRubber cushionYesMagnet built-inNone---0.14 to 0.7None--

1,109.35 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.929040MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount63.567-Centralized piping typeRcRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

1,778.24 €

1 7 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.92.511050MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount81.585-Centralized piping typeRcRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

1,778.23 €

1 9 Days Rodless Cylinder1,100[Aluminum] Aluminum Alloy1~4.92.511050MagneticGeneral Purpose[Clear Anodize] Hard Anodized Aluminum[Guideless] Direct Mount81.585-Centralized piping typeGRubber cushionYesMagnet built-inNone---0.12 to 0.7None--

Loading...

  1. 1
 

Configure

Clear all

21Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • Rodless Cylinder

    Clear

  • Table Material

    • Aluminum
      • Aluminum Alloy

    Clear

  • Maximum load weight (when horizontally mounted)(kg)

    • 0.05~0.8
    • 1~4.9

    Clear

  • Max. Load Mass(kg)

    • 0.2
    • 0.4
    • 1
    • 1.1
    • 1.2
    • 1.5
    • 2
    • 2.5
    • 3

    Clear

  • Table Size Length L(mm)

    • 34
    • 38
    • 53
    • 62
    • 70
    • 76
    • 90
    • 110
    • 118

    Clear

  • Cylinder Inner Diameter(Ø)

    • 6
    • 10
    • 15
    • 20
    • 25
    • 32
    • 40
    • 50
    • 63

    Clear

  • Rodless Cylinder Joint Type

    • Magnetic

    Clear

  • Usage Environment

    • General Purpose

    Clear

  • Table Surface Treatment

    • Clear Anodize
      • Hard Anodized Aluminum

    Clear

  • Guide

    • Guideless
      • Direct Mount

    Clear

  • Table Size Width W(mm)

    • 18.5
    • 19
    • 25.5
    • 26
    • 31.5
    • 32
    • 37.5
    • 39
    • 42.5
    • 53.5
    • 63.5
    • 81.5
    • 93.5
    • 97

    Clear

  • Table Size Height H(mm)

    • 19
    • 20
    • 26
    • 27
    • 32
    • 33
    • 39
    • 44
    • 55
    • 67
    • 85
    • 97

    Clear

  • Operating Pressure(MPa)

    • 0.12 to 0.7
    • 0.14 to 0.7
    • 0.15 to 0.7
    • 0.16 to 0.7

    Clear

  • Piping Format

    • Both sides piping type (CY3R)
    • Centralized piping type (CY3RG)
    • Centralized piping type
    • Standard type

    Clear

  • Port Screw Type

    • G
    • M screw
    • NPT
    • Rc

    Clear

  • Cushion

    • Rubber cushion

    Clear

  • Auto Switch

    • None
    • Yes

    Clear

  • Lead Wire Length(m)

    • Magnet built-in

    Clear

  • Number of Switches

    • M9B
    • M9BW
    • M9N
    • M9NW
    • M9P
    • M9PW
    • Z73
    • A90
    • A93
    • A96
    • For contact switch
    • None

    Clear

  • Custom-made Specifications

    • 0.5
    • 1
    • 3
    • 5

    Clear

  • End Block

    • M8 3‑pin plug connector
    • M8 4‑pin plug connector
    • M12 4‑pin A cord (normal key) plug connector
    • None

    Clear

  • Model

    • 1
    • 2
    • 3
    • 4

    Clear

  • Stroke Adjustment Unit Symbol

    • 0.12 to 0.7
    • 0.14 to 0.7
    • 0.15 to 0.7
    • 0.16 to 0.7

    Clear

  • Custom-made

    • CY1□6 compatible part specification
    • Hard chrome plating on outer surface of cylinder tube
    • High-speed specification rodless cylinder
    • Hydro specification rodless cylinder
    • None
    • Rodless cylinder with floating joint

    Clear

  • Type

    • Cylinder
    • Switch rail

    Clear

  • Applicable inner diameter of cylinder(ø)

    • 6
    • 10
    • 15
    • 20
    • 25
    • 32
    • 40

    Clear

  • Type

    • CY3R
    • CYR

    Clear

  • Stroke(mm)

    • 1,000
    • 1,050
    • 1,100
    • 1,200
    • 1,300
    • 1,500
    • 1,700
    • 1,800
    • 1,900
    • 2,000
    • 30
    • 35
    • 50
    • 55
    • 60
    • 65
    • 70
    • 75
    • 80
    • 85
    • 90
    • 100
    • 105
    • 110
    • 115
    • 120
    • 125
    • 130
    • 132
    • 134
    • 135
    • 139
    • 140
    • 142
    • 145
    • 147
    • 150
    • 155
    • 160
    • 165
    • 170
    • 175
    • 178
    • 180
    • 185
    • 190
    • 200
    • 205
    • 210
    • 215
    • 220
    • 225
    • 230
    • 235
    • 240
    • 241
    • 245
    • 250
    • 253
    • 255
    • 260
    • 265
    • 270
    • 275
    • 280
    • 290
    • 295
    • 300
    • 305
    • 310
    • 320
    • 325
    • 326
    • 330
    • 340
    • 345
    • 350
    • 360
    • 365
    • 370
    • 375
    • 380
    • 390
    • 400
    • 410
    • 415
    • 420
    • 425
    • 430
    • 435
    • 440
    • 445
    • 450
    • 455
    • 460
    • 465
    • 470
    • 475
    • 480
    • 486
    • 487
    • 490
    • 500
    • 510
    • 512
    • 520
    • 525
    • 530
    • 533
    • 540
    • 545
    • 550
    • 560
    • 570
    • 575
    • 580
    • 585
    • 590
    • 600
    • 606
    • 610
    • 620
    • 625
    • 630
    • 635
    • 640
    • 641
    • 645
    • 650
    • 660
    • 670
    • 672
    • 680
    • 690
    • 700
    • 704
    • 710
    • 720
    • 725
    • 730
    • 745
    • 750
    • 760
    • 770
    • 775
    • 780
    • 790
    • 800
    • 810
    • 820
    • 830
    • 840
    • 845
    • 850
    • 870
    • 900
    • 915
    • 950
    • 970
    • 980
    • 1010
    • 1020
    • 1030
    • 1060
    • 1140
    • 1150
    • 1160
    • 1220
    • 1250
    • 1325
    • 1350
    • 1362
    • 1400
    • 1420
    • 1450
    • 1460
    • 1550
    • 1600
    • 1640
    • 1650
    • 1660
    • 1725
    • 1750
    • 1822
    • 1920

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • Same day
    • 4 Days or Less
    • 7 Days or Less
    • 9 Days or Less
    • 14 Days or Less
    • 16 Days or Less
    • 26 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.