Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

CY3R, Magnetically Coupled Rodless Cylinder (with Switch Rail) (Part Numbers - CAD Download)

Promotional pricing ends 30/11/2024

An air slide table made by SMC

[Features]
· A further upgrade from the CY1 series
· The installation dimensions are the same as the CY1 series, yet it features improved bearing performance and reduced sliding resistance.
· NPT screws and G screws are standardized

(i)Remark

Product pictures are representations. CAD data is not supported by some of the model numbers.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Catalog

Drawing

Both sides piping type: ⌀6 (diameter 6 mm) Up to ⌀63 (Diameter 63 mm)

Note 1) ⌀50 (diameter 50 mm) and ⌀63 (diameter 63 mm) are L (-0.2 to 0).

Product Specifications

Product Image

Specifications

Bore size (mm)	6	10	15	20	25	32	40	50	63
Fluid	Air
Proof Pressure	1.05 MPa
Maximum operating pressure	0.7 MPa
Minimum operating pressure	0.16	0.16	0.16	0.16	0.15	0.14	0.12	0.12	0.12
Ambient and fluid temperature	-10°C to 60°C (no freezing)
^Note) Piston speed	50 to 500 mm/s
Cushion	Rubber bumper
Lubrication	Not required (non-lubricated)
Stroke length tolerance (mm)	0 to 250 st: (0 to +1.0), 251 to 1,000 st: (0 to +1.4), 1,001 st and above: (0 to +1.8)
Mounting methods	Direct mount type
Mounting orientation	Horizontal, inclined, vertical^Note2)
Magnetic holding force (N)	19.6	53.9	137	231	363	588	922	1,471	2,256

Note 1) if the auto switch is installed and the auto switch is set at the intermediate position, the maximum piston speed should be within 300 mm/s due to the relay etc.
Note 2) in the case of vertical mounting, intermediate stop by the pneumatic circuit is not possible.

Applicable auto switches

Auto Switch Unit Part Number	Type	Special Functions	Electrical Entry	Indicator light	Wiring (Output)	Load voltage
Auto Switch Unit Part Number	Type	Special Functions	Electrical Entry	Indicator light	Wiring (Output)	DC		AC
M9N	Solid State Auto Switch	—	Grommet	Yes	3-wire (NPN)	24 V	5 V, 12 V	—
M9P					3-wire (PNP)		5 V, 12 V
M9B					2-wire		12 V
M9NW		Diagnostic indication (2-color indicator)			3-wire (NPN)		5 V, 12 V
M9PW					3-wire (PNP)		5 V, 12 V
M9BW					2-wire		12 V
^{* 1}M9NA		Water-resistant (2-color indicator)			3-wire (NPN)		5 V, 12 V
^{* 1}M9PA					3-wire (PNP)		5 V, 12 V
^{* 1}M9BA					2-wire		12 V
A96	Reed type auto switch	—	Grommet	Yes	3-wire (NPN equivalent)	—	5 V	—
A93				Yes	2-wire	24 V	5 V, 12 V	100 V
A90				No	2-wire	24 V	5 V, 12 V	100 V or less

Auto Switch Unit Part Number	Lead Wire Length (m)				Pre-Wired Connector	Applicable load
Auto Switch Unit Part Number	0.5 (Nil)	1 (M)	3 (L)	5 (Z)	Pre-Wired Connector	Applicable load
M9N	●	●	●	○	○	IC circuit	Relay, PLC
M9P	●	●	●	○	○	IC circuit
M9B	●	●	●	○	○	—
M9NW	●	●	●	○	○	IC circuit
M9PW	●	●	●	○	○	IC circuit
M9BW	●	●	●	○	○	—
^{* 1}M9NA	○	○	●	○	○	IC circuit
^{* 1}M9PA	○	○	●	○	○	IC circuit
^{* 1}M9BA	○	○	●	○	○	—
A96	●	—	●	—	—	IC circuit	—
A93	●	●	●	●	—	IC circuit	Relay, PLC
A90	●	—	●	—	—	—	Relay, PLC

* 1The water resistant type auto switch can be mounted on the above models, but it does not guarantee the water-resistant performance of the product. Check with the manufacturer regarding water-resistant types for the above model numbers.

* Lead wire length symbol 0.5 m··No symbol (example) M9NW/1 m: M (example) M9NWM/3 m: L (example) M9NWL/5 m: Z (example) M9NWZ
*Solid state auto switches marked with ○ are produced to order.
*Auto switches are shipped together (but not assembled).

Diagram Examples

Structural drawing of double-sided piping

Both sides piping type

Components

Number	Part Name	Material		Notes
1	Body	Aluminum alloy		Hard anodized
2a	End cover A	Aluminum alloy		—
2b	End cover C	Aluminum alloy		—
3a	End cover B	Aluminum alloy		—
3b	End cover D	Aluminum alloy		—
4	Cylinder tube	Stainless steel		—
5	Piston	ø6 (diameter 6 mm)	Brass	ø6 (diameter 6 mm)	Electroless nickel plating
5	Piston	⌀10 to 63 (Diameter 10-63 mm)	Aluminum alloy	⌀10 to 63 (Diameter 10-63 mm)	Chromated
6	Shaft	Stainless steel		—
7	Piston-side yoke	Rolled steel plate		Zinc chromated
8	External slider side yoke	Rolled steel plate		Zinc chromated
9	Magnet A	—		—
10	Magnet B	—		—
11	Spacer	Aluminum alloy		⌀6 (diameter 6 mm) None
12	Bumper	Urethane rubber		—
13	Piston Nut	Carbon steel		Zinc chromated (⌀6-15 (diameter 6-15 mm) none)
14	Type C retaining ring for hole	Carbon tool steel		Phosphate Coated
15	Attachment ring	Aluminum alloy		Chromated
16	Type C retaining ring for shaft	High carbon steel wire material		—
17	Magnetic shielding plate	Rolled steel plate		Bright chromated (without ø6 (diameter: 6 mm), ø10 (diameter: 10 mm))
18a	Switch rail (both sides piping)	Aluminum alloy		White anodized
18b	Switch rail (Centralized piping)	Aluminum alloy		White anodized
19	Magnet	—		—
20	Hexagon socket head plug	Chromium steel		Nickel plated
21	Steel ball	Chromium steel		⌀40 (Diameter 40 mm)	Hexagon socket head plug
21	Steel ball	Chromium steel		⌀20 (diameter 20 mm), ⌀50 (diameter 50 mm), ⌀63 (Diameter 63 mm)	None
22	Hex socket head screw	Chromium steel		Nickel plated
23	Hex socket head set screw	Chromium steel		Nickel plated
24	Cylinder tube gasket	NBR		—
25	Wear ring A	Special resin		⌀6 (diameter 6 mm): not available
26	Wear ring B	Special resin		—
27	Wear ring C	Special resin		—
28	Piston seal	NBR		—
29	Lubretainer	Special resin		⌀6 (diameter 6 mm): not available
30	Switch rail gasket	NBR		Both sides piping: None

Specification Table

Model	A	B	C	CB	CR	D	F	G	GP	GW	H	HA	HB	HC	HP	HR	HS	HT	J × E
CY3R6	7^*	-^*	-^*	2	0.5	7.6	5.5	3^*	20	18.5	19	17	10.5	18	10.5^*	17	6	10.5^*	M4 × 0.7 × 6
CY3R10	9	6.5	3.2	2	0.5	12	6.5	4	27	25.5	26	24	14	25	14	24	5	14	M4 × 0.7 × 6
CY3R15	10.5	8	4.2	2	0.5	16.6^*	8	5	33	31.5	32	30	17	31	17	30	8.5	17	M5 × 0.8 × 7
CY3R20	9	9.5	5.2	3	1	21.6^*	9	6	39	37.5	39	36	21	38	24	36	7.5	24	M6 × 1 × 8
CY3R25	8.5	9.5	5.2	3	1	26.4^*	8.5	6	44	42.5	44	41	23.5	43	23.5	41	6.5	23.5	M6 × 1 × 8
CY3R32	10.5	11	6.5	3	1.5	33.6^*	10.5	7	55	53.5	55	52	29	54	29	51	7	29	M8 × 1.25 × 10
CY3R40	10	11	6.5	5	2	41.6^*	13	7	65	63.5	67	62	36	66	36	62	8	36	M8 × 1.25 × 10
CY3R50	14	14	8.2	5	2	52.4^*	17	8.5	83	81.5	85	80	45	84	45	80	9	45	M10 × 1.5 × 15
CY3R63	15	14	8.2	5	3	65.4^*	18	8.5	95	93.5	97	92	51	96	51	90	9.5	51	M10 × 1.5 × 15

Model	K	L	LD	M	MM	N	PW	Q	QW	T	TC	W	WP	WS	X	Y	Z
CY3R6	7	34	3.5	3.5	M3 × 0.5	3.5	19	60^*	10	14.5^*	10.5	20	9.5	6	10	35.5	66^*
CY3R10	9	38	3.5	4	M3 × 0.5	4.5	26	68	14	17.5	14	20	13	8	15	39.5	76
CY3R15	14	53	4.3	5	M4 × 0.7	6	32	84	18	19	17	25	16	7	18	54.5	94
CY3R20	11	62	5.4	5	M4 × 0.7	7	38	95	17	20.5	20	40	19	7	22	64	107
CY3R25	15	70	5.4	6	M5 × 0.8	6.5	43	105	20	21.5	22.5	40	21.5	7	28	72	117
CY3R32	13	76	7	7	M6 × 1	8.5	54	116	26	24	28	50	27	7	35	79	130
CY3R40	15	90	7	8	M6 × 1	11	64	134	34	26	33	60	32	7	40	93	148
CY3R50	25	110	8.6	10	M8 × 1.25	15	82	159	48	30	42	60	41	10	50	113	176
CY3R63	24	118	8.6	10	M8 × 1.25	16	94	171	60	32	48	70	47	10	60	121	188

Model	P (piping port)
Model	Blank	TN^*	TF^*
CY3R6	M3 × 0.5^*	—	—
CY3R10	M5 × 0.8	—	—
CY3R15	M5 × 0.8	—	—
CY3R20	Rc 1/8	NPT1/8	G1/8
CY3R25	Rc 1/8	NPT1/8	G1/8
CY3R32	Rc 1/8	NPT1/8	G1/8
CY3R40	Rc 1/4	NPT1/4	G1/4
CY3R50	Rc 1/4	NPT1/4	G1/4
CY3R63	Rc 1/4	NPT1/4	G1/4

*2) * The mark shows the dimensions different from the CY1R series.

Selection support information

Model Number Notation

Model number examples

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
CY3R6-50
CY3R6-50-M9N
CY3R6-50N
CY3R6-55
CY3R6-60
CY3R6-65
CY3R6-70
CY3R6-75
CY3R6-75-M9NZ
CY3R6-75N
CY3R6-80
CY3R6-80N
CY3R6-85
CY3R6-85-A93L
CY3R6-90
CY3R6-100
CY3R6-100-M9BL
CY3R6-100-M9N
CY3R6-100-M9NWL
CY3R6-100-X1468
CY3R6-100N
CY3R6-110
CY3R6-120
CY3R6-130N
CY3R6-140
CY3R6-142
CY3R6-147N
CY3R6-150
CY3R6-150-M9P
CY3R6-150N
CY3R6-155
CY3R6-160
CY3R6-160N
CY3R6-170
CY3R6-170N
CY3R6-175
CY3R6-180
CY3R6-200
CY3R6-200-A93L
CY3R6-200-M9B
CY3R6-200-M9N
CY3R6-200-M9NL
CY3R6-200N
CY3R6-210N
CY3R6-220
CY3R6-230
CY3R6-241
CY3R6-250
CY3R6-250N
CY3R6-300
CY3R6-300-M9B
CY3R6-300N
CY3R10-35
CY3R10-50
CY3R10-50-A90L
CY3R10-60
CY3R10-60N
CY3R10-70
CY3R10-75
CY3R10-80

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Type	Stroke (mm)	Table Material	Maximum load weight (when horizontally mounted) (kg)	Max. Load Mass (kg)	Table Size Length L (mm)	Cylinder Inner Diameter (Ø)	Rodless Cylinder Joint Type	Usage Environment	Table Surface Treatment	Guide	Table Size Width W (mm)	Table Size Height H (mm)	Operating Pressure (MPa)	Piping Format	Port Screw Type	Cushion	Auto Switch	Lead Wire Length (m)	Number of Switches	Custom-made Specifications	End Block	Model	Stroke Adjustment Unit Symbol	Custom-made	Type	Applicable inner diameter of cylinder (ø)
205.98 €	1	4 Days	Rodless Cylinder	50	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
269.81 €	1	9 Days	Rodless Cylinder	50	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9N	0.5	-	2	0.16 to 0.7	None	-	-
189.35 €	1	9 Days	Rodless Cylinder	50	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	9 Days	Rodless Cylinder	55	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	7 Days	Rodless Cylinder	60	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	26 Days	Rodless Cylinder	65	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	7 Days	Rodless Cylinder	70	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	7 Days	Rodless Cylinder	75	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
289.68 €	1	7 Days	Rodless Cylinder	75	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9N	5	-	2	0.16 to 0.7	None	-	-
193.21 €	1	7 Days	Rodless Cylinder	75	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	9 Days	Rodless Cylinder	80	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
193.21 €	1	7 Days	Rodless Cylinder	80	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	7 Days	Rodless Cylinder	85	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
257.19 €	1	26 Days	Rodless Cylinder	85	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	A93	3	-	2	0.16 to 0.7	None	-	-
210.90 €	1	26 Days	Rodless Cylinder	90	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
210.90 €	1	7 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
280.35 €	1	26 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9B	3	-	2	0.16 to 0.7	None	-	-
274.73 €	1	9 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9N	0.5	-	2	0.16 to 0.7	None	-	-
286.06 €	1	26 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9NW	3	-	2	0.16 to 0.7	None	-	-
225.69 €	1	26 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	CY1□6 compatible part specification	-	-
193.23 €	1	7 Days	Rodless Cylinder	100	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
215.81 €	1	9 Days	Rodless Cylinder	110	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
215.81 €	1	7 Days	Rodless Cylinder	120	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
197.23 €	1	9 Days	Rodless Cylinder	130	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	-	None	Cylinder	-
215.81 €	1	7 Days	Rodless Cylinder	140	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
215.81 €	1	7 Days	Rodless Cylinder	142	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
197.23 €	1	7 Days	Rodless Cylinder	147	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
215.81 €	1	7 Days	Rodless Cylinder	150	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
279.65 €	1	9 Days	Rodless Cylinder	150	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9P	0.5	None	2	-	None	Cylinder	-
197.23 €	1	7 Days	Rodless Cylinder	150	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
220.66 €	1	7 Days	Rodless Cylinder	155	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
220.66 €	1	9 Days	Rodless Cylinder	160	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
201.08 €	1	7 Days	Rodless Cylinder	160	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
220.66 €	1	9 Days	Rodless Cylinder	170	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
201.08 €	1	26 Days	Rodless Cylinder	170	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	-	None	Cylinder	-
220.66 €	1	26 Days	Rodless Cylinder	175	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
220.66 €	1	9 Days	Rodless Cylinder	180	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
220.66 €	1	7 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
266.95 €	1	9 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	A93	3	-	2	0.16 to 0.7	None	-	-
282.69 €	1	26 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9B	0.5	-	2	0.16 to 0.7	None	-	-
284.48 €	1	26 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9N	0.5	-	2	0.16 to 0.7	None	-	-
292.00 €	1	26 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9N	3	-	2	0.16 to 0.7	None	-	-
201.08 €	1	7 Days	Rodless Cylinder	200	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
205.02 €	1	26 Days	Rodless Cylinder	210	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
225.58 €	1	7 Days	Rodless Cylinder	220	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
225.58 €	1	7 Days	Rodless Cylinder	230	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	-	None	Cylinder	-
225.58 €	1	7 Days	Rodless Cylinder	241	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
225.58 €	1	7 Days	Rodless Cylinder	250	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
205.02 €	1	9 Days	Rodless Cylinder	250	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	-	None	Cylinder	-
230.55 €	1	7 Days	Rodless Cylinder	300	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
292.56 €	1	26 Days	Rodless Cylinder	300	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5 ～ 19	19 ～ 20	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	M9B	0.5	-	2	0.16 to 0.7	None	-	-
208.94 €	1	9 Days	Rodless Cylinder	300	[Aluminum] Aluminum Alloy	0.05~0.8	0.2	34	6	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	18.5	19	0.16 to 0.7	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	-	None	Cylinder	-
226.56 €	1	9 Days	Rodless Cylinder	35	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
226.56 €	1	7 Days	Rodless Cylinder	50	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
272.85 €	1	9 Days	Rodless Cylinder	50	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	A90	3	-	2	0.16 to 0.7	None	-	-
231.48 €	1	7 Days	Rodless Cylinder	60	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
209.94 €	1	7 Days	Rodless Cylinder	60	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5	26	-	Standard type	M screw	Rubber cushion	None	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
231.48 €	1	9 Days	Rodless Cylinder	70	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
231.48 €	1	7 Days	Rodless Cylinder	75	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-
231.48 €	1	7 Days	Rodless Cylinder	80	[Aluminum] Aluminum Alloy	0.05~0.8	0.4	38	10	Magnetic	General Purpose	[Clear Anodize] Hard Anodized Aluminum	[Guideless] Direct Mount	25.5 ～ 26	26 ～ 27	-	Standard type	M screw	Rubber cushion	Yes	Magnet built-in	None	-	-	-	0.16 to 0.7	None	-	-

1
2
3
4
5
Next >>

Configure

1,569Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- Rodless Cylinder
Clear
Stroke(mm)
1,000

1,050

1,100

1,200

1,300

1,500

1,700

1,800

1,900

2,000

30

35

50

55

60

65

70

75

80

85

90

100

105

110

115

120

125

130

132

134

135

139

140

142

145

147

150

155

160

165

170

175

178

180

185

190

200

205

210

215

220

225

230

235

240

241

245

250

253

255

260

265

270

275

280

290

295

300

305

310

320

325

326

330

340

345

350

360

365

370

375

380

390

400

410

415

420

425

430

435

440

445

450

455

460

465

470

475

480

486

487

490

500

510

512

520

525

530

533

540

545

550

560

570

575

580

585

590

600

606

610

620

625

630

635

640

641

645

650

660

670

672

680

690

700

704

710

720

725

730

745

750

760

770

775

780

790

800

810

820

830

840

845

850

870

900

915

950

970

980

1010

1020

1030

1060

1140

1150

1160

1220

1250

1325

1350

1362

1400

1420

1450

1460

1550

1600

1640

1650

1660

1725

1750

1822

1920
Clear
Table Material
- Aluminum
  - Aluminum Alloy
Clear
Maximum load weight (when horizontally mounted)(kg)
0.05~0.8

1~4.9
Clear
Max. Load Mass(kg)
0.2

0.4

1

1.1

1.2

1.5

2

2.5

3
Clear
Table Size Length L(mm)
34

38

53

62

70

76

90

110

118
Clear
Cylinder Inner Diameter(Ø)
6

10

15

20

25

32

40

50

63
Clear
Rodless Cylinder Joint Type
- Magnetic
Clear
Usage Environment
- General Purpose
Clear
Table Surface Treatment
- Clear Anodize
  - Hard Anodized Aluminum
Clear
Guide
- Guideless
  - Direct Mount
Clear
Table Size Width W(mm)
18.5

19

25.5

26

31.5

32

37.5

39

42.5

53.5

63.5

81.5

93.5

97
Clear
Table Size Height H(mm)
19

20

26

27

32

33

39

44

55

67

85

97
Clear
Operating Pressure(MPa)
0.12 to 0.7

0.14 to 0.7

0.15 to 0.7

0.16 to 0.7
Clear
Piping Format
Both sides piping type (CY3R)

Centralized piping type (CY3RG)

Centralized piping type

Standard type
Clear
Port Screw Type
- G
- M screw
- NPT
- Rc
Clear
Cushion
Rubber cushion
Clear
Auto Switch
None

Yes
Clear
Lead Wire Length(m)
- Magnet built-in
Clear
Number of Switches
M9B

M9BW

M9N

M9NW

M9P

M9PW

Z73

A90

A93

A96

For contact switch

None
Clear
Custom-made Specifications
- 0.5
- 1
- 3
- 5
Clear
End Block
- M8 3‑pin plug connector
- M8 4‑pin plug connector
- M12 4‑pin A cord (normal key) plug connector
- None
Clear
Model
- 1
- 2
- 3
- 4
Clear
Stroke Adjustment Unit Symbol
0.12 to 0.7

0.14 to 0.7

0.15 to 0.7

0.16 to 0.7
Clear
Custom-made
- CY1□6 compatible part specification
- Hard chrome plating on outer surface of cylinder tube
- High-speed specification rodless cylinder
- Hydro specification rodless cylinder
- None
- Rodless cylinder with floating joint
Clear
Type
- Cylinder
- Switch rail
Clear
Applicable inner diameter of cylinder(ø)
6

10

15

20

25

32

40
Clear
Type
- CY3R
- CYR
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

4 Days or Less

7 Days or Less

9 Days or Less

12 Days or Less

16 Days or Less

26 Days or Less

98 Days or Less
Reset

Optional Attributes

Product pictures are representations. CAD data is not supported by some of the model numbers.
The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .