MHF2, Air Gripper, 2 Finger, Low Profile (MHF2-8DR-M9BWVM)
- Promotional pricing ends 30/11/2024
Product Details:
Manufacturer part number: MHF2-8DR-M9BWVM
Brand: SMC
Price: 517.73 €
Delivery time: 26 Days
Technical Data:
Dimensions when open: 8 mm
Dimensions when closed: 0 mm
Gripping Force (when 0.5Mpa at opening): 19 N
Gripping Force (when 0.5Mpa at closing): 19 N
Additional Function: With Linear Guide
(i)Remark
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MHF2-8DR-M9BWVM
MHF2 Series Low Profile Air Gripper Specifications
Double acting, internal grip JIS symbol
Double acting, external grip JIS symbol
Body option: axial ported (Nil) external appearance
Body option: side ported (R) external appearance
| Fluid | Air | |
|---|---|---|
| Operating pressure | ø8 (diameter 8 mm): 0.15 to 0.7 MPa | |
| ø12 to 20 (diameter 12 to 20 mm): 0.1 to 0.7 MPa | ||
| Ambient and fluid temperature | -10°C to +60℃ (no freezing) | |
| Repeatability | ±0.05 mm*1 | |
| Maximum operating frequency | Short stroke | 120 c.p.m. |
| Middle stroke | 120 c.p.m. | |
| Long stroke | 60 c.p.m. | |
| Lubrication | Non-lube | |
| Action | Double acting | |
| Auto switch (option)*2 | Solid state auto switch (3-wire, 2-wire) | |
*1 Value when no unbalanced load is applied to the finger. If the finger is subjected to an unbalanced load, the backlash of the rack pinion can be up to ±0.15 mm.
*2 See the manufacturer's catalog for detailed specifications of auto switches.
Model
| Action | Model | Cylinder bore (mm) | Gripping force*1 | Opening/closing stroke (Both sides) mm | Weight*2 g | Unobstructed capacity (cm3) | |
|---|---|---|---|---|---|---|---|
| Effective gripping force per finger N | Finger opening side | Finger closed side | |||||
| Double acting | MHF2-8D | 8 | 19 | 8 | 65 | 0.7 | 0.6 |
| MHF2-8D1 | 16 | 85 | 1.1 | 1.0 | |||
| MHF2-8D2 | 32 | 120 | 2.0 | 1.9 | |||
| MHF2-12D | 12 | 48 | 12 | 155 | 1.9 | 1.6 | |
| MHF2-12D1 | 24 | 190 | 3.3 | 3.0 | |||
| MHF2-12D2 | 48 | 275 | 6.1 | 5.8 | |||
| MHF2-16D | 16 | 90 | 16 | 350 | 4.9 | 4.1 | |
| MHF2-16D1 | 32 | 445 | 8.2 | 7.4 | |||
| MHF2-16D2 | 64 | 650 | 14.9 | 14.0 | |||
| MHF2-20D | 20 | 141 | 20 | 645 | 8.7 | 7.3 | |
| MHF2-20D1 | 40 | 850 | 15.1 | 13.7 | |||
| MHF2-20D2 | 80 | 1,225 | 28.0 | 26.6 | |||
*1 Values based on pressure of 0.5 MPa, gripping point L = 20 mm.
*2 Values above do not include auto switch weight.
Structure drawing
MHF2-8D, MHF2-8D1 structure drawing
MHF2-8D2 structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodized |
| 2 | Piston | Stainless steel | - |
| 3 | Joint | Stainless steel | Heat treatment |
| 4 | Guide rail | Stainless steel | Heat treatment |
| 5 | Finger | Stainless steel | Heat treatment |
| 6 | Roller stopper | Stainless steel | - |
| 7 | Pinion | Carbon steel | Nitriding |
| 8 | Cap A | Aluminum alloy | Clear anodized |
| 9 | Cap B | Aluminum alloy | Clear anodized |
| 10 | Cap C | Aluminum alloy | Clear anodized |
| No. | Description | Material | Note |
|---|---|---|---|
| 11 | Head bumper | Urethane rubber | - |
| 12 | Clip | Stainless steel wire | - |
| 13 | Rack | Stainless steel | Nitriding |
| 14 | Magnet | - | Nickel plated |
| 15 | Steel ball | High carbon chrome bearing steel | - |
| 16 | Wear ring | Synthetic resin | - |
| 17 | Roller | High carbon chrome bearing steel | - |
| 18 | Needle roller | High carbon chrome bearing steel | - |
| 19 | Parallel pin | Stainless steel | - |
| 20 | Piston seal | NBR | - |
| 21 | Gasket | NBR | - |
MHF2-12D□ to 20D□ structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodized |
| 2 | Piston | Aluminum alloy | Clear anodized |
| 3 | Joint | Stainless steel | Heat treatment |
| 4 | Guide rail | Stainless steel | Heat treatment |
| 5 | Finger | Stainless steel | Heat treatment |
| 6 | Roller stopper | Stainless steel | - |
| 7 | Pinion | Carbon steel | Nitriding |
| 8 | Cap A | Aluminum alloy | Clear anodized |
| 9 | Cap B | Aluminum alloy | Clear anodized |
| 10 | Cap C | Aluminum alloy | Clear anodized |
| 11 | Head bumper | Urethane rubber | - |
| 12 | Rack | Stainless steel | Nitriding |
| 13 | Magnet | - | Nickel plated |
| 14 | Steel ball | High carbon chrome bearing steel | - |
| 15 | Wear ring | Synthetic resin | - |
| 16 | ø12 (diameter 12 mm): Roller | High carbon chrome bearing steel | - |
| ø16 to 20 (diameter 16 to 20 mm): Parallel pin | Stainless steel | - | |
| 17 | Needle roller | High carbon chrome bearing steel | - |
| 18 | ø12 (diameter 12 mm): R-shaped retaining ring | Carbon steel | Phosphate coated |
| ø16 to 20 (diameter 16 to 20 mm): Type C retaining ring | |||
| 19 | Parallel pin | Stainless steel | - |
| 20 | Piston seal | NBR | - |
| 21 | Gasket | NBR | - |
| 22 | Gasket | NBR | - |
External dimensional drawing
(Unit: mm)
MHF2-8D dimensional drawing
*If mounting holes are used, use the hex socket head cap screw (accessory).
(Unit: mm)
MHF2-8D A detail dimensional drawing
(Unit: mm)
MHF2-8D auto switch mounting groove dimensional drawing
Precautions
- *Be sure to read the product precautions in the manufacturer's catalog before use.
- *See the manufacturer's catalog for information other than the above.
Part Number
|
|---|
| MHF2-8DR-M9BWVM |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Dimensions when open (mm) | Dimensions when closed (mm) | Gripping Force (when 0.5Mpa at opening) (N) | Gripping Force (when 0.5Mpa at closing) (N) | Additional Function | Stroke Adjustment Mechanism | Operating Pressure Range (MPa) | Cylinder internal diameter (mm) | Body options | Auto switch | Number of switches | Lead wire length | Stroke (mm) | Made to order specifications | Connector type for gripper opening/closing | Stroke adjustment width (mm) | Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
517.73 € | 1 | 26 Days | 8 | 0 | 19 | 19 | With Linear Guide | Not Provided | 0.15～0.7 | 8 | Side piping | M9BWV | 2 pcs. | 1 m | 8 | None | None | None | - |
Loading...
Basic information
| Type | Main Body | How to Grip | Pinch, Chuck Type / Open, Chuck Type | Number of Fingers | 2 pcs. |
|---|---|---|---|---|---|
| Main Body Shape | Square Shape (Flat Shape) | Operation Method | Double Acting | Environment, Applications | Standard |
Configure
Basic Attributes
-
Type
- Standard
-
Type
- MHF2-12D
- MHF2-16D
- MHF2-20D
- MHF2-8D
-
Dimensions when open(mm)
-
Dimensions when closed(mm)
-
Gripping Force (when 0.5Mpa at opening)(N)
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Additional Function
- With Linear Guide
- Stroke Adjustment Function
-
Stroke Adjustment Mechanism
- Not Provided
- Open Direction Adjustment
- Close Direction Adjustment
- Open/Close Dual Adjustment
-
Cylinder internal diameter(mm)
-
Body options
- Axial piping
- Side piping
-
Auto switch
-
Number of switches
-
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
-
Stroke(mm)
-
Made to order specifications
- Heat resistance (100°C)
- Fluoroelastomer seal
- Grease for food processing machines
- Grease for food processing machines / fluorine grease
- None
- With adjuster for finger opening/closing width adjustment
-
Connector type for gripper opening/closing
- M8 3-pin
- M12 4-pin
- None
-
Stroke adjustment width(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 22 Days or Less
- 26 Days or Less
- 98 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.