Parallel Style Wide Opening Air Gripper MHL2 Series (MHL2-25D2-M9BZS)
- Promotional pricing ends 31/12/2024
Product Details:
Manufacturer part number: MHL2-25D2-M9BZS
Brand: SMC
Price: 734.73 €
Delivery time: 26 Days
Technical Data:
Dimensions when open: 320 mm
Dimensions when closed: 200 mm
Gripping Force (when 0.5Mpa at opening): 131 N
Gripping Force (when 0.5Mpa at closing): 131 N
Operating Pressure Range: 0.1～0.6 MPa
(i)Remark
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MHL2-25D2-M9BZS
Parallel Style Wide Opening Air Gripper MHL2 Series Specifications
Double acting, internal grip JIS symbol
Double acting, external grip JIS symbol
| Bore size (mm) | 10 | 16 | 20 | 25 | 32 | 40 |
|---|---|---|---|---|---|---|
| Fluid | Air | |||||
| Action | Double acting | |||||
| Operating pressure (MPa) | 0.15 to 0.6 | 0.1 to 0.6 | ||||
| Ambient and fluid temperature | -10 to +60°C | |||||
| Repeatability | ±0.1 | |||||
| Lubrication | Non-lube | |||||
| Effective gripping force (N) at 0.5 MPa * | 14 | 45 | 74 | 131 | 228 | 396 |
*Gripping position is 40 mm for bore size 10 mm, 16 mm, 20 mm, 25 mm, and 80 mm for bore size 32 mm, 40 m.
Model/Stroke
Opening/closing stroke
| Model | Bore size mm | Maximum operating frequency c.p.m | Opening/closing stroke (mm) (L2-L1) | Width at closing (mm) (L1) | Width at opening (mm) (L2) | Weight g |
|---|---|---|---|---|---|---|
| MHL2-10D | 10 | 60 | 20 | 56 | 76 | 280 |
| MHL2-10D1 | 40 | 40 | 78 | 118 | 345 | |
| MHL2-10D2 | 60 | 96 | 156 | 425 | ||
| MHL2-16D | 16 | 60 | 30 | 68 | 98 | 585 |
| MHL2-16D1 | 40 | 60 | 110 | 170 | 795 | |
| MHL2-16D2 | 80 | 130 | 210 | 935 | ||
| MHL2-20D | 20 | 60 | 40 | 82 | 122 | 1,025 |
| MHL2-20D1 | 40 | 80 | 142 | 222 | 1,495 | |
| MHL2-20D2 | 100 | 162 | 262 | 1,690 | ||
| MHL2-25D | 25 | 60 | 50 | 100 | 150 | 1,690 |
| MHL2-25D1 | 40 | 100 | 182 | 282 | 2,560 | |
| MHL2-25D2 | 120 | 200 | 320 | 2,775 | ||
| MHL2-32D | 32 | 30 | 70 | 150 | 220 | 2,905 |
| MHL2-32D1 | 20 | 120 | 198 | 318 | 3,820 | |
| MHL2-32D2 | 160 | 242 | 402 | 4,655 | ||
| MHL2-40D | 40 | 30 | 100 | 188 | 288 | 5,270 |
| MHL2-40D1 | 20 | 160 | 246 | 406 | 6,830 | |
| MHL2-40D2 | 200 | 286 | 486 | 7,905 |
*The open and close time spans represent the valve when the exterior of the workpiece is being held.
Structure drawing
ø10 (bore size 10 mm) structure drawing
ø16 to 25 (bore size 16 to 25 mm) structure drawing
ø32 (bore size 32 mm), ø40 (bore size 40 mm) structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodized |
| 2 | Finger | Aluminum alloy | Hard anodized |
| 3 | Piston rod | Stainless steel | - |
| 4 | Rack | Stainless steel | - |
| 5 | Pinion | Carbon steel | Nitriding |
| 6 | Pinion cover | Carbon steel | Electroless nickel plated |
| 7 | Pinion axis | Stainless steel | Nitriding |
| 8 | Piston | Brass | - |
| 9 | Piston A | Brass | - |
| 10 | Piston B | Brass | - |
| 11 | Piston A | Stainless steel | - |
| 12 | Rod cover | Aluminum alloy | Chromate treated |
| 13 | Bumper | Urethane rubber | - |
| 14 | Clip | Stainless steel spring wire | - |
| 15 | Rubber magnet | Synthetic rubber | - |
| 16 | Magnet | - | Nickel plated |
| 17 | Rod seal cover B | Cold rolled steel plate | Electroless nickel plated |
| 18 | Washer | Stainless steel | Nitriding |
| 19 | Bearing | Oil-containing polyacetal with back metal | - |
| 20 | Bearing | Oil-containing polyacetal with back metal | - |
| 21 | U nut | Carbon steel | Zinc chromated |
| 22 | R-shaped retaining ring | Carbon steel | Phosphate coated |
| 23 | Type C retaining ring | Carbon steel | Phosphate coated |
| 24 | Wave washer | Spring steel | Phosphate coated |
| 25 | Conical spring washer | Carbon steel | Nickel plated |
| 26 | Piston seal | NBR | - |
| 27 | Rod seal | NBR | - |
| 28 | Rod seal | NBR | - |
| 29 | Gasket | NBR | - |
| 30 | Gasket | NBR | - |
External dimensional drawing
(Unit: mm)
MHL2-10D□ dimensional drawing
(Unit: mm)
MHL2-10D□ dimensional drawing 2
(Unit: mm)
MHL2-10D□ K cross view (fingers closed) dimensional drawing
(Unit: mm)
Auto switch mounting groove (enlarged view) dimensional drawing
(Unit: mm)
| Model | A | B | C | D | E | F | G | H | J |
|---|---|---|---|---|---|---|---|---|---|
| MHL2-10D | 38 | 36 | 51 | 26 | 56 | 76 | 100 | 24 | 80 |
| MHL2-10D1 | 54 | 52 | 67 | 42 | 78 | 118 | 142 | 39 | 108 |
| MHL2-10D2 | 72 | 70 | 85 | 60 | 96 | 156 | 180 | 57 | 146 |
*1 The J dimension is at fully closed.
*2 D1 differs from D2 when the fingers are closed because the shaft is ejected from the finger end. The J dimension differs from the value that is the G dimension with the stroke subtracted.
Precautions
- *Before using, please refer to the "Safety Precautions," the "Air Gripper Precautions," and the "Auto Switch Precautions."
- *If a workpiece is hooked onto the attachment, make sure that excessive impact will not occur at the start and the end of the movement. Failure to observe this precaution may result in shifting or dropping the workpiece, which could be dangerous.
- *See the manufacturer's catalog for information other than the above.
Part Number
|
|---|
| MHL2-25D2-M9BZS |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Dimensions when open (mm) | Dimensions when closed (mm) | Gripping Force (when 0.5Mpa at opening) (N) | Gripping Force (when 0.5Mpa at closing) (N) | Operating Pressure Range (MPa) | Cylinder internal diameter (mm) | Auto switch | Number of switches | Lead wire length | Stroke (mm) | Made to order specifications | Connector type for gripper opening/closing | Port thread type | Piston materials | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
734.73 € | 1 | 26 Days | 320 | 200 | 131 | 131 | 0.1～0.6 | 25 | M9B | 1 pc. | 5 m | 120 | None | None | M | Brass |
Loading...
Basic information
| Type | Main Body | How to Grip | Pinch, Parallel Type / Open, Parallel Type | Number of Fingers | 2 pcs. |
|---|---|---|---|---|---|
| Main Body Shape | Square Shape (Wide) | Operation Method | Double Acting | Environment, Applications | Dust Resistant |
| Additional Function | Bearing Support | Stroke Adjustment Mechanism | Not Provided |
Configure
Basic Attributes
-
Type
- MHL2-10□
- MHL2-16□
- MHL2-20□
- MHL2-25□
- MHL2-32□
- MHL2-40□
-
Dimensions when open(mm)
-
Dimensions when closed(mm)
-
Gripping Force (when 0.5Mpa at opening)(N)
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Cylinder internal diameter(mm)
-
Auto switch
-
Number of switches
-
Lead wire length
- 0.5 m
- 3 m
- 5 m
- None
-
Stroke(mm)
-
Made to order specifications
- Heat resistance (100°C)
- Dust resistant specification
- Fluoroelastomer seal
- Grease for food processing machines / fluorine grease
- No magnet
- None
- With adjusting bolt for closing width adjustment
- With strong scraper + lubrication retention (NBR seal)
-
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
-
Port thread type
- G
- M
- NPT
- Rc
-
Piston materials
- Aluminum alloy
- Brass
- Stainless steel
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 26 Days or Less
- 68 Days or Less
- 98 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.