Precision Crimper PA-09 (Part Numbers)
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Crimp height can be adjusted. Provides excellent visibility during crimping.
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 1.25 mm to 1.5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer with excellent oil resistance for the grip.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
· The set pin lets you easily adjust for looseness that occurs over long periods of use.
[Applications]
· Crimping work for ultra-small contact pin.
[Features]
· Crimp height can be adjusted. Provides excellent visibility during crimping.
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 1.25 mm to 1.5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer with excellent oil resistance for the grip.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
· The set pin lets you easily adjust for looseness that occurs over long periods of use.
[Applications]
· Crimping work for ultra-small contact pin.
- Stock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PA-09
Basic information
| Product Category | Pliers | Plier Type | Pliers | Overall Length(mm) | 175 |
|---|---|---|---|---|---|
| With or without spring | Available | Set / Single Item | Single Item | Die (Width x Height x Thickness)(mm) | 1×0.5×1.7t／1.4×0.55×1.7t／1.6×0.8×2t／1.9×0.9×2t |
| Material | High Carbon Steel | Main body: option | Main Body | Weight(g) | 135 |
| Features | Low-cost and lightweight. Adjustable crimp heights. There are many compatible terminals since core barrels and coated wire barrels are crimped separately. With high visibility there will be less failure during crimping. High precision crimping of extremely small contact pins such as 1.25 mm and 1.5 mm pitch. By selectively using the four dies, it can be used for crimping of the corresponding terminals up to 1.25-2.5 mm pitch. Corresponds to the AWG#32 to AWG#20 wire. The dies are thin and ideal for crimping extremely small pins. Grip adopts environmentally friendly elastomer and has excellent oil resistance. Compatible with terminals for JST GH connectors (1.25 mm pitch). | RoHS | Corresponds To | Supplement | Includes a strap hole convenient for preventing falls. |
This page is Precision Crimper PA-09, part number PA-09.
You can find the detail information about specifications and dimensions on part number PA-09.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.