"Catcher Wrench" (7-Piece Set / with Spring Steel and Steel Balls) (Part Numbers)
- Promotional pricing ends 31/12/2024
- Volume Discount
[Features]
· Spring steel and steel ball are embedded in the head ball point. (3.0 mm – 6.0 mm)
· Convenient for tightening screws in recessed places, because it holds bolts firmly from inside.
· The new structure of the ball point part enables work with one side tilted at a 25°angle.
· Steel balls have a hardness of HRC 60°or more and do not wear.
[Applications]
· Fastening of cap bolts and set screws.
· Spring steel and steel ball are embedded in the head ball point. (3.0 mm – 6.0 mm)
· Convenient for tightening screws in recessed places, because it holds bolts firmly from inside.
· The new structure of the ball point part enables work with one side tilted at a 25°angle.
· Steel balls have a hardness of HRC 60°or more and do not wear.
[Applications]
· Fastening of cap bolts and set screws.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
APTS710
Basic information
| Type | Hex L-shape wrench | Tip Type | Ballpoint | Width across flat dimension(mm) | 2 / 3 / 4 / 5 / 6 / 1.5 / 2.5 |
|---|---|---|---|---|---|
| Single Product/Set Classification | Set Product | Set Content(mm) | 1.5、2、2.5、3、4、5、6 | Set Content(piece) | 7 |
| Trusco Code | 396-0846 | Mass | 100 g/set | Features | Spring steel and steel ball are embedded in the head ball point. (3.0-6.0 mm) bolts are held firmly from inside, so useful for tightening screws in recessed places. Ball point with new structure, achieving operation at 25°inclination to one side. Steel ball is HRC60 or higher hardness, so does not wear. |
| Accessory | Plastic Holder |
This page is "Catcher Wrench" (7-Piece Set / with Spring Steel and Steel Balls), part number APTS710.
You can find the detail information about specifications and dimensions on part number APTS710.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.