CoroCut Reinforced Shank Tool Bit For Parting With Small 1 / 2 f1 Offset, R / LF123 (Part Numbers)
A high clamp rigidity type shank holder for parting and grooving.
Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
The holder strength is high thanks to the jaw.
For parting and grooving.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Groove Width (mm) | Maximum Groove Depth (mm) | Cutting Direction | Shank height (mm) | Sheet size | Dimension B (mm) | Dimension H1 (mm) | Dimension L3 (mm) | Gauge Chip | Tip tightening torque (Nm) | Overall Length (mm) | Dimensions/f1 (mm) | Dimensions Dm (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
219.66 € | 1 | 6 Days | 2 | 17 | Left-hand | 20 | E | 20 | 20 | 35.5 | N123E2-0200-CM | 4 | 125 | 20.5 | 34 | ||
219.66 € | 1 | 6 Days | 2.5 | 17 | Left-hand | 20 | F | 20 | 20 | 37 | N123F2-0250-CM | 4 | 125 | 20.5 | 34 | ||
233.56 € | 1 | 6 Days | 2.5 | 17 | Left-hand | 25 | F | 25 | 25 | 37 | N123F2-0250-CM | 4 | 150 | 25.5 | 34 | ||
219.66 € | 1 | 8 Days | 3 | 22 | Left-hand | 20 | G | 20 | 20 | 43 | N123G2-0300-CM | 5 | 125 | 20.6 | 44 | ||
233.56 € | 1 | 6 Days | 3 | 22 | Left-hand | 25 | G | 25 | 25 | 43 | N123G2-0300-CM | 5 | 150 | 25.6 | 44 | ||
219.66 € | 1 | 6 Days | 4 | 22 | Left-hand | 20 | H | 20 | 20 | 44 | N123H2-0400-CM | 6 | 125 | 20.6 | 44 | ||
233.56 € | 1 | 8 Days | 4 | 22 | Left-hand | 25 | H | 25 | 25 | 44 | N123H2-0400-CM | 6 | 150 | 25.6 | 44 | ||
219.66 € | 1 | 6 Days | 2 | 17 | Right-hand | 20 | E | 20 | 20 | 35.5 | N123E2-0200- CM | 4 | 125 | 20.5 | 34 | ||
219.66 € | 1 | 8 Days | 2.5 | 17 | Right-hand | 20 | F | 20 | 20 | 37 | N123F2-0250- CM | 4 | 125 | 20.5 | 3 | ||
233.56 € | 1 | 8 Days | 2.5 | 17 | Right-hand | 25 | F | 25 | 25 | 37 | N123F2-0250- CM | 4 | 150 | 25.5 | 34 | ||
219.66 € | 1 | 8 Days | 3 | 22 | Right-hand | 20 | G | 20 | 20 | 43 | N123G2-0300-CM | 5 | 125 | 20.6 | 44 | ||
233.56 € | 1 | 8 Days | 3 | 22 | Right-hand | 25 | G | 25 | 25 | 43 | N123G2-0300-CM | 5 | 150 | 25.6 | 44 | ||
219.66 € | 1 | 8 Days | 4 | 22 | Right-hand | 20 | H | 20 | 20 | 44 | N123H2-0400- CM | 6 | 125 | 20.6 | 44 | ||
233.56 € | 1 | 8 Days | 4 | 22 | Right-hand | 25 | H | 25 | 25 | 44 | N123H2-0400- CM | 6 | 150 | 25.6 | 44 |
Loading...
Basic information
| Application | Outer Diameter Grooving / Cutting off | Number of corners for tip use | 2 Corner | Cutting Angle(°) | 0 |
|---|---|---|---|---|---|
| Specifications | f1 Reinforced shank for cutting-off with small offset |
Configure
Basic Attributes
-
Groove Width(mm)
-
Maximum Groove Depth(mm)
-
Cutting Direction
- Right-hand
- Left-hand
-
Shank height(mm)
-
Sheet size
-
Dimension B(mm)
-
Dimension H1(mm)
-
Dimension L3(mm)
-
Gauge Chip
-
Tip tightening torque(Nm)
-
Overall Length(mm)
-
Type
- R/LF123
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.