Single Cut Ball 70 End Mill DH-OCHB Type
- Volume Discount
· One mill for roughing to finishing high-hardness material.
· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
· Reduces chattering by using high tool rigidity and unequal divisions.
· Implements good cutting performance with low resistance, with a torsion angle of 45°.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| DH-OCHB4030 |
| DH-OCHB4040 |
| DH-OCHB4050 |
| DH-OCHB4060 |
| DH-OCHB4080 |
| DH-OCHB4100 |
| DH-OCHB4120 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Blade length (ℓ) (mm) | Underneck length (ℓ1) (mm) | φDc (mm) | |
|---|---|---|---|---|---|---|---|
105.49 € | 1 | Available | 6 Days | - | - | 3 | |
87.41 € | 1 | 6 Days | - | - | 4 | ||
88.71 € | 1 | 6 Days | 7.5 | - | 5 | ||
127.14 € | 1 | Available | 6 Days | 9 | - | 6 | |
106.87 € | 1 | 6 Days | - | 24 | 8 | ||
137.40 € | 1 | 6 Days | - | - | 10 | ||
220.45 € | 1 | Available | 6 Days | - | 36 | 12 |
Loading...
Basic information
| Type | Ball | work material | General Steel / Quenched and tempered steel / High Hardness Steel: to HRC55 / High Hardness Steel: to HRC60 / High Hardness Steel: to HRC65 | Number of flutes(sheet) | 4 |
|---|---|---|---|---|---|
| Coating | Other | R Precision(μm) | ±8 | Machining Application | Curved surface / Engraving / R Groove |
| Coating (Other) | DH coating (PVD coating) | With/Without Torsion | Yes (45°) |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.