Throw-Away Drill, 1 / 1.5 Series Holder, Morse Taper Shank (Part Numbers)
(i)Remark
- Use a holder and tip from the same series. Periodically replace the holder after the tip has been exchanged about 100 times.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
22010S-003M
Basic information
| Shank Type | Taper shank |
|---|
This page is Throw-Away Drill, 1 / 1.5 Series Holder, Morse Taper Shank, part number 22010S-003M.
You can find the detail information about specifications and dimensions on part number 22010S-003M.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 22015S-003M |
| 23010H-003M |
| 23015H-003M |
| 24010H-003M |
| 24015H-003M |
| 25010H-003M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Hole diameter (drill diameter) D (mm) | Overall Length L (mm) |
|---|---|---|---|---|---|---|
441.35 € | 1 | 14 Days | 21.83 to 24.38 | 232.5 | ||
472.42 € | 1 | 14 Days | 17.53 to 24.38 | 283.3 | ||
507.47 € | 1 | 14 Days | 21.83 to 24.38 | 283.3 | ||
472.42 € | 1 | 14 Days | 17.53 to 24.38 | 334.2 | ||
507.47 € | 1 | 14 Days | 21.83 to 24.38 | 334.2 | ||
522.61 € | 1 | 14 Days | 17.53 to 24.38 | 435.8 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.