Scaffolding ratchet (Part Numbers)
[Specifications]
・Type (misc.): High leverage diagonal cutters with 12° angled head
・Overall Length(mm): 200
・DIN standard: DIN ISO 5749
[Features]
・For very tough, continuous use
・High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
・Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire
・Type (misc.): High leverage diagonal cutters with 12° angled head
・Overall Length(mm): 200
・DIN standard: DIN ISO 5749
[Features]
・For very tough, continuous use
・High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
・Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Overall Length(mm) | 200 | Cutting hardness(HRC) | 64 | DIN standard | DIN ISO 5749 |
|---|---|---|---|---|---|
| Edge hardness(HRC) | 64 | Material properties | tempered|polishing | Pliers features | non-flush type |
| Product type | Kraft side cutter | Range of use (pliers) | Workshop | Standards | DIN ISO 5749 |
| Type (misc.) | High leverage diagonal cutters with 12° angled head | Wire hardness (max.) hard wire(mm) | 3 | Wire hardness (max.)(mm) | Medium-hard/hard/piano wire diameter 4.20 /3.00 /2.50 |
| Wire hardness piano wire (max.)(mm) | 2.5 | Wire hardness (max.) medium wire(mm) | 4.2 | Material | Chromium-vanadium steel |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.