Board-To-Board Connectors（Connection direction：Angle）

?* Information on days to ship and prices

• 

  FI Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · Connector for connecting cables to boards with a 1.25-mm pitch for circuit connections inside equipment.
  ・The single-row model is suitable for thinner devices. The 2-row model (staggered array) is suitable for high-density mounting.
  ・The circuit board side receptacle is a small, low-profile SMT with a mounting height of 1.8 mm (1-row type) and 3.7 mm (2-row type).
  ・SMT connection: 1-row type – 1.25-mm pitch; 2-row type – 0.625-mm pitch.
  ・The receptacle prevents the connector from floating during soldering and is equipped with a hold-down to strengthen the retaining force on the connector's circuit board.
  ・The cable-side plug has a uniform finish and superior workability for discrete wire crimped-type connectors.
  ・Includes a reverse-insertion prevention key.
  ・This is a friction-lock type.
  · The receptacles can be supplied with embossed taping to support automatic mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Standard Compliant Board-to-Board Connector PCN10 Series

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pin Header with 2.54-mm Pitch (Terminal 1-Row Type), A2 Series

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TX24 / TX25 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  With an internal machine board-to-board connector, circuit boards can be connected horizontally, parallel, or perpendicularly by joining the receptacle (TX24) and plug (TX25).
  
  [Features]
  · A receptacle and plug along with a straight through-hole type and right angle thorough-hole type are available.
  · Ribbon-type (flat) contacts are used with a long contact stroke, excellent contact reliability/stability, and resistance to prying once mated.
  · The straight through-hole type offers 3 insulator heights and a parallel circuit board gap of 12 to 24 mm (2-m gap).
  ・Both receptacle (TX24) mating sides have an insulator mating guide, which excels at strong insertion, and is perfect for lock & panel mountings.
  ・This type has a satisfying ‘click' action when inserting and extracting.
  ・Hook pin and hook-less types are available to temporarily hold the circuit board while soldering and also prevent the solder from oozing.
  ・The contact terminal allows for simple circuit board pattern design with a 1.27-mm pitch and 1.905-mm array gap with a 4-row staggered arrangement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Connector (4-Row, 128-Contact Type) - XC5 (Multi-Contact)

  OMRON

  [Features]
  ・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
  ・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
  ・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
  ・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FFC Series

  HONDA TSUSHIN KOGYO

  Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
  
  [Features]
  • The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
  • Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
  • Can be used, in combination with the DIC series, as circuit-switching terminal plates.
  • Can select the number of contacts required.
  • Many pin lengths are available, so the user can select the appropriate length for a given.
  • Select the surface required: gold, tin, or copper.
  • Molds come in two colors (black and red).
  • Remover pin prevents backwards insertion.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  PS Series SEN Type

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A connector for connecting to flat ribbon cables that are used for high-density mountings inside equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Cable Connector (General Purpose Type) - XG4

  OMRON

  The core of this printed circuit board connector is compliant with MIL standards.
  
  [Features]
  · The adoption of a new high-productivity design has delivered both high reliability and low costs.
  · A box type plug (XG4C type) that helps save space during installation is also available.
  · A press-fit type plug (XG4E type) that can be used as a relay is also available.
  · A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
  · The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
  · Complies with MIL standards (MIL-C-83503).
  · UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FPC/FFC Connector, FH28 Series (Height 2.55 mm)

  HIROSE ELECTRONIC

  [Features]
  · A solidly built connector for FPC/FFC connections.
  · An FPC positioning mechanism provides highly reliable connections.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.52 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Board-to-Board Connector with 2.54-mm Pitch: HIF3H Series

  HIROSE ELECTRONIC

  This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
  
  [Features]
  ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
  ・Compatibility: It can be combined with other HIF3 series connectors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector with Lock, 7.92-mm Pitch, High-Current Support - DF22 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PC Card Connector IC1 Series, Compatible with PC Card Standard

  HIROSE ELECTRONIC

  This PC card connector is compliant with the PC Card Standard.
  
  [Features]
  · Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
  · Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
  · Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
  · Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
  · Card connectors that support automatic mounting are available.
  · Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.

  Select to compare

  Configure now
  Starting from∗ ：	3.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FA5 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These easy-to-use connectors feature a rotating actuator, a ZIF structure that makes it easy to insert or extract the FPC and excellent usability in a space-saving package
  
  [Features]
  · The original connector type, which is mounted on the surface of the circuit board, has a low profile. The connector height is 1.45 mm when mounted on the circuit board.
  · Mainboard drop-down types are mounted on the back of the circuit board. When a circuit board with a thickness of 0.4 mm is used, consistency with the board surface is achieved (mounting height on the back side of the circuit board is 1.0 mm).
  · The single-sided lower contact structure ensures that inserting the FPC backwards is safe.
  · The FPC insertion direction (conductor side) is the same for both original and circuit board concave types.
  · The zero-insertion force structure means that no direct force is applied when the FPC is inserted or extracted, making the product extremely easy to use.
  · The cable is held temporarily in place when the FPC is inserted. Rotating the actuator connects the internal contact and holds the FPC in place.
  · It is easy to insert or extract the FPC by operating the rotating actuator.
  · The included hold-down element prevents the connector from lifting up during soldering and strengthens retention of the connector to the circuit board.
  · The structure also prevents the actuator from opening due movement of the FPC.
  · The structure supports automatic mounting with a general-purpose mounter. Delivery with embossed taping packaging is available.
  · Product conformation enables the automation of continuity checks.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  WR Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A low-profile connector with a minimal footprint and height, offering a range of selectable parallel board intervals of 4–9 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · An original 2.5-mm pitch Series connector with a track record of various uses in AV equipment and consumer electronics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FFC-FPC (Through Hole) (5597) Upper Surface Contact Type

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.25 mm pitch, ZIF upper surface contact type)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Connector (for Medium and High Electrical Currents) - XC4

  OMRON

  [Features]
  ・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
  ・ It conforms to and is compatible with DIN41612.
  ・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
  ・ It can be mounted within the same rack as the XC5 series.
  ・ There is a wide selection of the M type of DIN connectors (mixed type) available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for some products).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SL 3.5 Series

  WEIDMUELLER

  Pluggable PCB connection with innovative connection technology for safe and intuitive handling.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connectors for Connecting to 0.5 / 1-mm Pitch FPC / FFC - FH12 Series

  HIROSE ELECTRONIC

  [Features]
  · The industry's first flip-lock ZIF connector.
  · Available in a wide array of variations with a proud track record lasting more than 10 years.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.37 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Board-to-Board Connector for Perpendicular Connections with 1-mm Pitch, FX5 Series

  HIROSE ELECTRONIC

  A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
  
  [Features]
  · Number of pins, header-side height: 2 types.
  · 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
  · 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
  ·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
  ▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pin Header with 2.54-mm Pitch (Terminal 2-Row Type), A1 Series

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5-mm Pitch, Vertical Connection Post Header, MDF14A Series

  HIROSE ELECTRONIC

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pin Header with 2-mm Pitch (Terminal 1-Row Type), A4 Series

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2-mm Pitch Pin Header (Terminal 2-Row Type) A3 Series

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PC Card Connector Compatible with CardBus, IC11S Series

  HIROSE ELECTRONIC

  A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
  
  [Features]
  · PC Card Standard: Ground plate equipped with 8 connection ground points.
  ·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
  · Compatible with Type I, Type II, and Type III cards.
  · Includes terminal for ground clip.
  · Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
  · Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
  · Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
  · High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
  · Independent ejection mechanism used for easy removal of multiple high-output cards.
  · Many variations: with many variations, a type that matches to a particular set can be selected.
  · Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
  · The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
  · Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
  · Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
  · Also, POP-UP version 2 is approx. 12% lighter than version 1.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CF Card Connector MI20 / 21 Series

  HIROSE ELECTRONIC

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Standard Compliant Board-to-Board Connector PCN12 Series

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Standard Compliant Board-to-Board Connector PCN13 Series

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.

  Select to compare

  Configure now
  Starting from∗ ：	2.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Back Connectors NX Series for I / O Cards

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  microSD Card Connector - DM3 Series

  HIROSE ELECTRONIC

  A socket connector for use with the microSD Card TM. Available in a wide array of variations.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.60 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Socket Conforming to Card Bus Complying with PC Card Standards, IC9 Series

  HIROSE ELECTRONIC

  This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
  
  [Features]
  ・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
  ・This allows for every type of card signal to be accelerated.
  ・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
  ・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SIM Card Connector ID1 Series

  HIROSE ELECTRONIC

  This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Circuit Board-to-Cable Connector (in Equipment), KX14/KX15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A two-piece type, board-to-board connector for use inside increasingly high-functionality, smaller, lighter AV devices, networking devices, and other advanced electronics.
  
  [Features]
  · Compatible with parallel board intervals of 4–9-mm (1-mm each).
  · Two, straight-type, insulator heights are available for KX14 (receptacle), and three for KX15 (plug).
  · When installing parallel boards, the board interval dimensions can be selected between 4–9-mm (1-mm each) by using different receptacle and plug combinations.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PS Series Board-to-Board Connection Socket Receptacle

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A socket receptacle that can be combined with original pin headers for vertical or balanced board-to-board connections.
  · The socket contacts are pre-installed inside the socket receptacle housing for soldering onto the board via the through hole.
  · Straight and triangle types are available for parallel or vertical connections between boards in combination with the partner pin headers.
  · Open and box-style pin headers are available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FI-R Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A connector for use with 0.5-mm pitch transmission terminals inside digital equipment.
  
  [Features]
  · Terminal: 0.05 mm
  · Connector height: 3.0 mm
  Compact design supporting 21, 31, 41, 51 core.
  · Excellent mating performance due to a large mating guide on the plug side.
  · Excellent circuit board retention strength with fixed soldered parts also on the mating side of the circuit board.
  · The differential impedance characteristics are matched to 100 Ω.
  · In addition, the ground has been reinforced by modifying the structure of the shell and hold-down.
  · A right angle type and a straight type are both available for the circuit board and can be freely selected and used with different circuit board patterns.
  · Mechanical lock prevents unsuccessful fitting and disconnection.
  · Cable type can be selected to match the desired application, including crimped discrete, soldered thin coaxial cable, FCC type, etc.
  · Utilized in VESA standard connectors for LCD interfaces used in LCD TVs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL-G Series

  JAPAN AVIATION ELECTRONICS(JAE)

  · These are two-piece type connectors for circuit board-to-wire connections used for configuring pin headers and socket housings.
  
  [Features]
  · The wires are uniformly finished, crimped type for excellent workability and are completed for semi-automatic crimping machines, mass volume wiring connections, and manual crimping tools.
  · Secure coupling is made possible due a combined pin header wall surface guide groove and a socket housing key, providing an incorrect coupling/reverse-insertion prevention structure.
  · These lock lightly by the interlocking protrusions on both sides of the pin header and socket housing.
  · The terminal section of the housing has a step to which the finger tips can be applied, making it easy to extract despite its small size.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  LY Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  These are connectors for high reliability PCBs that are utilized in combination with socket housings for box type pin headers and cables that are strongly resistant to connector drop and twisting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PS Series, MIL Type

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · An insulation displacement connector that makes board-to-flat ribbon cable (FRC) connections easy.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Crimped Original Type, PS Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  ・The socket contacts are crimped to discrete wires and then it is inserted into the socket housing.
  ・This is a board-to-wire connector used in combination with pin headers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PS Series Direct Board-Attachment Type

  JAPAN AVIATION ELECTRONICS(JAE)

  Uses the self-piercing method that allows for simultaneous batched pressure-welding connection of all poles without removing the flat ribbon cable insulation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PS-LA Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small, low-profile PS Series connector — mounting height: 9.5 mm, contact pitch: 2.54 mm.
  · The combination of a crimped socket and a box-style pin header (straight/angled) makes this connector strongly resistant against connector collapse and prying. This connector is optimally suited for mounting high-density, board-to-wire connections.
  · A highly reliable type for obtaining a secure, stable connection. The structure prevents incorrect insertion and is strongly resistant to vibration and pulling. The socket contacts are a 2-point contact configuration, which utilize spring characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FFC-FPC (Through Hole) (52807) Angle Type

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.0 mm pitch, NONZIF, angled type)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN Connector (Twin Contact Type) - XC5 (DIN Standard)

  OMRON

  [Features]
  ・ The number of international standard DIN connectors has been expanded substantially.
  ・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
  ・These variations can be used with a number of industrial applications.
  ・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
  ・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
  ・ Low insertion force has been realized thanks to FEM analysis.
  ・ Can fit with the manufacturer's XC series.
  ▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DIN Style Connector (Twin Contact Type) - XC5 (DIN Style)

  OMRON

  [Features]
  ・ An expanded DIN style connector series, designed with DIN in mind.
  ・ Fits with DIN standard connectors.
  ・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
  ・ DIN style 1 uses the same method of attachment as DIN.
  ・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
  ・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
  (Except XC5).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DIN Socket Sequence Connector - XC7

  OMRON

  [Features]
  · A sequence connector made using DIN standard dimensions.
  · Daughterboard hot swapping is made possible by inserting a power line from the front and extracting from the rear.
  · Can be used in the same way as with standard DIN connectors. The mounting dimensions are the same as standard B type, and C type DIN connectors. Uses a sequence terminal for all connections and has a fit length of 4 mm, helping vastly save on mounting space.
  · Uses a 2-stage sequence for the socket-end 1 mm sequence terminal, and 3-stage sequence for the plug-end sequence terminal.
  · The contacts use a dual-sided contact structure. Furthermore, the gold/palladium plating of the contact points increases durability and allows for 5,000 insertions and extractions.
  · The sequence terminal position can be chosen.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...