Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Spiral Taps（Screw size (Nominal)：M10）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Short Spiral Tap for Deep Holes S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	14.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.46 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel-Use SU Spiral-Type

SKC

[Specifications]
· Shape: Spiral tap
· Screw type: metric
· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
· Material Details: SKH

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap for Aluminum AL+SP / AL-SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.73 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy ZET-B

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)

YAMAWA MFG

* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.18 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tapping combo head

WERA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

CNC tapping head

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.45 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide Spiral Tap

MISUMI

[Features]
-Carbide tap with uncoated spiral flute
-Can be used for machining blind holes
-Suitable for mass production of aluminium and copper alloys

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MISUMI

[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	117.72 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Spiral Tap

TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

MISUMI

The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Spiral Tap

High-Speed Steel Spiral Tap【10 Pieces Per Package】

MISUMI

[Features]
-High speed uncoated steel tap with spiral flutes
-Suitable for machining blind holes
-Effective for materials with continuous chips such as carbon steel and steel alloys.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	143.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

OSG

Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Select to compare

Configure now
Starting from^∗ ：	27.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

OSG

Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT

OSG

Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.52 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

OSG

Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	61.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for High-Carbon Steels EX-HC-SFT

OSG

Suitable for drilling holes in materials such as high carbon materials greater than medium carbon steel, die steel, alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Carbide Spiral Tap OT-SFT

OSG

Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

Select to compare

Configure now
Starting from^∗ ：	121.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Copper, CU-SFT

OSG

Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap

SKC

[Features]
Can be used for tapping screw holes in stainless steel.
[Features]
This twist tap can evacuate chips with a helical flute.

Select to compare

Configure now
Starting from^∗ ：	31.47 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Spiral Tap for Blind Hole 1013

GUHRING

[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.46 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

YAMAWA MFG

We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on aluminum castings, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Short Spiral Tap for Stainless Steel SU-S-SP

YAMAWA MFG

[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium Coated Through Hole Spiral Tap AU+SL

YAMAWA MFG

Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	SANDVIK	YAMAWA MFG	OSG	OSG	OSG	MISUMI	OSG	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	WERA	REX TOOLS	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SKC	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	A Tap Series, Spiral Tap, A-SFT	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	Short Spiral Tap for Deep Holes S-SP	Spiral Tap Series, General Purpose EX-SFT	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	MT Series High-Speed Steel Spiral Tap	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Stainless Steel-Use SU Spiral-Type	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS	Spiral Tap for Aluminum AL+SP / AL-SP	Spiral Tap for Titanium Alloy ZET-B	Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)	Tapping combo head	CNC tapping head	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	Carbide Spiral Tap	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】	High-Speed Steel Spiral Tap【10 Pieces Per Package】	Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Spiral Tap Series, V Coated, V-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT	Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT	Spiral Tap Series, for High-Carbon Steels EX-HC-SFT	Spiral Tap Series, Carbide Spiral Tap OT-SFT	Spiral Tap Series, for Copper, CU-SFT	Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT	Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT	Spiral Tap	Spiral Tap for Blind Hole 1013	HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP	HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP	H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP	Short Spiral Tap for Stainless Steel SU-S-SP	Spiral Tap for Stainless Steel SU+SP / SU-SP	Titanium Coated Through Hole Spiral Tap AU+SL
Starting from^∗	24.83 € *Unit price with basic configuration Volume Discount	-	23.06 € *Unit price with basic configuration Volume Discount	14.57 € *Unit price with basic configuration Volume Discount	21.53 € *Unit price with basic configuration Volume Discount	19.46 € *Unit price with basic configuration Volume Discount	16.12 € *Unit price with basic configuration Volume Discount	21.53 € *Unit price with basic configuration Volume Discount	33.82 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	23.73 € *Unit price with basic configuration Volume Discount	37.83 € *Unit price with basic configuration Volume Discount	72.18 € *Unit price with basic configuration Volume Discount	22.25 € *Unit price with basic configuration Volume Discount	8.45 € *Unit price with basic configuration Volume Discount	-	86.47 € *Unit price with basic configuration Volume Discount	117.72 € *Unit price with basic configuration Volume Discount	33.86 € *Unit price with basic configuration Volume Discount	143.33 € *Unit price with basic configuration Volume Discount	27.13 € *Unit price with basic configuration Volume Discount	24.83 € *Unit price with basic configuration Volume Discount	45.56 € *Unit price with basic configuration Volume Discount	27.13 € *Unit price with basic configuration	27.13 € *Unit price with basic configuration Volume Discount	16.26 € *Unit price with basic configuration Volume Discount	15.62 € *Unit price with basic configuration Volume Discount	20.52 € *Unit price with basic configuration Volume Discount	61.22 € *Unit price with basic configuration	16.26 € *Unit price with basic configuration Volume Discount	121.33 € *Unit price with basic configuration	26.27 € *Unit price with basic configuration	13.95 € *Unit price with basic configuration Volume Discount	14.22 € *Unit price with basic configuration Volume Discount	31.47 € *Unit price with basic configuration	39.46 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	29.43 € *Unit price with basic configuration Volume Discount	23.73 € *Unit price with basic configuration Volume Discount	33.18 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	5 Days	6 Days	6 Days	6 Days	Same day	5 Days	6 Days	7 Days	7 Days	7 Days	6 Days	7 Days	4 Days	3 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	7 Days	8 Days	7 Days	7 Days	7 Days	7 Days	6 Days	7 Days	6 Days	6 Days	Same day
Specifications				Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M3 ～ M12	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10	M10
Pitch (P), Number of Threading(mm)	0.75 ～ 1.5	-	1 ～ 1.5	0.75 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1 ～ 1.5	1.5	1.25 ～ 1.5	1 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	-	-	-	1.5	1.5	1.5	1.5	1.5	0.75 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.5	1 ～ 1.5	1	1.5	1.5	1.25 ～ 1.5	1.5	1.25 ～ 1.5	1.5	1 ～ 1.5	1.5	1 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.25 ～ 1.5	1.5	1 ～ 1.5	1 ～ 1.5
Chamfer threads (Lcf)	1.5P ～ 2.5P	-	2.5P	2.5P	2.5P	3P	2.5 P	2.5P	-	2.5P	2.5P	3P	2.5P	-	-	-	1.5 P ～ 2.5 P	2.5 P	1.5 P ～ 2.5 P	2.5 P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	3P	1.5P ～ 2.5P	2.5P	2.5P	2.5P	-	-	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	5P
Tool Material Type	Powder high-speed steel	-	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Cobalt HSS	Vanadium High-Speed Steel	-	Cobalt HSS	High-speed steel	Powder high-speed steel	High-speed steel	-	-	-	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	-
Tap Type	Spiral Tap	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	-	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	-	-	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole
Coating Y/N	Available	-	N/A	N/A	N/A	N/A	N/A	N/A	-	Available	N/A	N/A	N/A	-	-	-	N/A	N/A	Available	N/A	Available	Available	Available	Available	Available	N/A	N/A	N/A	Available	N/A	N/A	Available	N/A	N/A	-	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	Available
Coating Type	Other	-	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiCN	-	-	-	-	-	-	-	-	TiN	-	CrN	TiN	TiN	TiCN	Other	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	CrN	Non-Coated	Non-Coated	-	TiN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	-	-	TiN
Overall Length (L)(mm)	75	74.61 ～ 160	75	75	100 ～ 150	75	75	100 ～ 200	-	75	75	75	150	59	100	80 ～ 160	75	75	75 ～ 150	75	75	75	150	75	75	75	75	75	150	75	75	75	75	75	-	75	75	75	75	75	75	75	75	75	75

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Trapezoid
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.3-48UNC

No.4-48UNF

No.4-40UNC

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1'-12UNF

1-8UNC

1'-8UNC

1"1/2UN

W1"1/2

1 1/2-8UN

1"1/4UN

W1"1/4

1 1/4-8UN

1"1/8UN

W1"1/8

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1"3/4UN

1 3/4-8UN

1"3/8UN

W1"3/8

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

1 5/8-8UN

1 7/8-8UN

1'W8

G 1/8

PF 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

5M

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

5.5M

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M10

MF10

No10UN

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M22

MF22

Tr 22

M23

M24

MF24

Tr 24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

M30

MF30

Tr 30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P

5.5P

7P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

230

250

260

270

280

290

300

315
Drawing

Clear

Brand

- MISUMI (5)
- Cost Efficient Products ()
- YAMAWA MFG (28)
- OSG (21)
- REX TOOLS (9)
- SANDVIK (5)
- NACHI(FUJIKOSHI) (2)
- SKC (2)
- WERA (2)
- GUHRING (1)
- FEIN (1)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- TRUSCO NAKAYAMA (0)
- ISHIHASHI (0)
- GEDORE (0)
- WALTER PROTOTYP (0)
- HAZET (0)
- ESCO (0)
Clear

Spiral Taps（Screw size (Nominal)：M10）

Categories related to Spiral Taps

Payment Method

On-Demand Manufacturing

Change View

Certificates

MISUMI worldwide

Social Media

Legal notice