Chamfering / Centering Tools（work material：High Hardness Steel）
Search by sub-category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 71.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Straight Shank, Countersink 3-Flute 90° 1326
GUHRING
[Features]
· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
· Using A coating achieves a longer life.- Volume Discount
Configure nowStarting from∗ ： 46.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack
MISUMI
A carbide countersink that's essential in chamfering and deburring- Volume Discount
Configure nowStarting from∗ ： 80.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 59.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Configure nowStarting from∗ ： 82.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN coated type of the popular center drill- Volume Discount
Configure nowStarting from∗ ： 13.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 41.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Configure nowStarting from∗ ： 111.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Straight Shank, Countersink 3-Flute 90° 476
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.- Volume Discount
Configure nowStarting from∗ ： 24.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 48.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 42.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 38.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving- Volume Discount
Configure nowStarting from∗ ： 55.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Configure nowStarting from∗ ： 61.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Center Drill, Long Model
MISUMI
The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.- Volume Discount
Configure nowStarting from∗ ： 20.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 74.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 37.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 43.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 17.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LS-LDS
OSG
90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.Configure nowStarting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LDS
OSG
90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.Configure nowStarting from∗ ： 357.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
2-Flute Corner, Rounding Shape, FX-ECR
OSG
Specialized R chamfering tools. As high toughness cemented carbide alloy was used as the base material, it is able to handle a wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 61.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Configure nowStarting from∗ ： 84.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200
NS TOOL
Supports NCs and MCs. R chamfering can be easily machined. Infinity coating used for significantly greater durability- Volume Discount
Configure nowStarting from∗ ： 81.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 44.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
Compared to conventional products, high-speed cutting is possible and a wide range of operations such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High speed steel and carbide series are available.- Volume Discount
Configure nowStarting from∗ ： 119.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.- Volume Discount
Configure nowStarting from∗ ： 98.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Configure nowStarting from∗ ： 101.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center 120°
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.- Volume Discount
Configure nowStarting from∗ ： 20.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center, 120°, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.- Volume Discount
Configure nowStarting from∗ ： 31.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center, 120°, Long Type, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.Configure nowStarting from∗ ： 69.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Carbide SP Center 60°
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.Configure nowStarting from∗ ： 34.47 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Carbide SP Center, 60°, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.Configure nowStarting from∗ ： 44.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide SP Center 90°
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.Configure nowStarting from∗ ： 32.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center, 90°, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.- Volume Discount
Configure nowStarting from∗ ： 43.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center, 90°, Long Type, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.- Volume Discount
Configure nowStarting from∗ ： 78.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide SP Center, 60°, Long Type, ALD Coating
IWATA TOOL
Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering.
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.- Volume Discount
Configure nowStarting from∗ ： 78.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Center Drill Type A 60°
IWATA TOOL
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.- Volume Discount
Configure nowStarting from∗ ： 70.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Center Drill, A Type, High Helix 60°, ALD Coating
IWATA TOOL
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.- Volume Discount
Configure nowStarting from∗ ： 81.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | GUHRING | MISUMI | SANDVIK | MISUMI | MISUMI | MISUMI | IWATA TOOL | GUHRING | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | OSG | OSG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL |
| Product Series | TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack | SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfering end mill, 3-flute / short model | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 71.59 € *Unit price with basic configuration Volume Discount | 46.93 € *Unit price with basic configuration Volume Discount | 80.16 € *Unit price with basic configuration Volume Discount | 59.45 € *Unit price with basic configuration | 82.15 € *Unit price with basic configuration Volume Discount | 13.73 € *Unit price with basic configuration Volume Discount | 41.90 € *Unit price with basic configuration Volume Discount | 111.05 € *Unit price with basic configuration | 24.09 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 111.08 € *Unit price with basic configuration | 48.89 € *Unit price with basic configuration Volume Discount | 42.10 € *Unit price with basic configuration Volume Discount | 38.81 € *Unit price with basic configuration Volume Discount | 46.59 € *Unit price with basic configuration Volume Discount | 55.87 € *Unit price with basic configuration Volume Discount | 61.66 € *Unit price with basic configuration Volume Discount | 20.62 € *Unit price with basic configuration Volume Discount | 74.16 € *Unit price with basic configuration Volume Discount | 37.62 € *Unit price with basic configuration Volume Discount | 42.61 € *Unit price with basic configuration Volume Discount | 32.62 € *Unit price with basic configuration Volume Discount | 43.97 € *Unit price with basic configuration Volume Discount | 42.86 € *Unit price with basic configuration Volume Discount | 17.24 € *Unit price with basic configuration | 295.75 € *Unit price with basic configuration | 357.80 € *Unit price with basic configuration | 61.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 88.29 € *Unit price with basic configuration Volume Discount | 84.50 € *Unit price with basic configuration | 81.20 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 44.76 € *Unit price with basic configuration Volume Discount | 119.56 € *Unit price with basic configuration Volume Discount | 98.33 € *Unit price with basic configuration Volume Discount | 101.01 € *Unit price with basic configuration | 20.48 € *Unit price with basic configuration Volume Discount | 31.67 € *Unit price with basic configuration Volume Discount | 69.00 € *Unit price with basic configuration | 34.47 € Special price *Unit price with basic configuration Promotional pricing | 44.74 € Special price *Unit price with basic configuration Promotional pricing | 32.60 € *Unit price with basic configuration | 43.81 € *Unit price with basic configuration Volume Discount | 78.32 € *Unit price with basic configuration Volume Discount | 78.32 € *Unit price with basic configuration Volume Discount | 70.76 € *Unit price with basic configuration Volume Discount | 81.42 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Hole Chamfer | - | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) | Centering (Positioning) |
| Tip angle (θ) | 60 ～ 120 | 90 | - | - | - | - | - | 60 | 90 | 45° | 90 | 90 | 60 ～ 120 | 90 | 60 ～ 120 | - | - | - | - | - | - | - | - | 90 | 90 | 90 | - | 90 | 90 | - | - | 60 | 90 | 90 | 120 | 120 | 120 | 60 | 60 | 90 | 90 | 90 | 60 | 60 | 60 |
| Tool Diameter (D)(mm) | 3 ～ 16 | 4.3 ～ 31 | 6.3 ～ 20.5 | 3.17 ～ 20 | 1 ～ 4 | 1 ～ 4 | - | 0.6 ～ 4 | 4.3 ～ 31 | 4 ～ 6 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 0.5 ～ 2 | 0.5 ～ 5 | 1 ～ 4 | - | - | - | - | - | - | 3 ～ 25 | 16 ～ 25 | 16 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 12.1 | - | 1 ～ 3.8 | 0.6 ～ 4 | 0.1 ～ 1.5 | 0.4 ～ 16 | 0.4 ～ 16 | 2 ～ 12 | 0.03 ～ 6 | 0.1 ～ 6 | 0.03 ～ 6 | 0.1 ～ 6 | 0.5 ～ 4 | 0.5 ～ 4 | 1 ～ 8 | 1 ～ 6 |
| work material | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[◎] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | - | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Double-edged | Double-edged |
| Peripheral Blade Y/N | N/A | - | N/A | - | N/A | N/A | Available | N/A | - | Available | Available | N/A | Available | Available | Available | N/A | N/A | N/A | Available | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Tool Material Type | Carbide | High-speed steel | Carbide | - | Carbide | High-speed steel | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | Available | Available | Available | - | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | N/A | Available | N/A | Available | Available | Available | N/A | Available |
| Coating Type | TS | TiAlN | TiAlN | - | TiAlN | TiAlN | AlCrN | Other | - | TiAlN | TS | TS | TS | TS | TiAlN | TiAlN | TiAlN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | TS | TiCN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiCN | TiAlN | Other | ALT | - | Other | Other | - | Other | - | Other | Other | Other | - | Other |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | 0.1 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- IWATA TOOL (16)
- GUHRING (11)
- OSG (9)
- THE CUT (6)
- NS TOOL (3)
- SANDVIK (3)
- NT TOOL (1)
- PREVOST (0)
- MAPAL (0)
- NIKKEN KOSAKUSHO (0)
- RYOKO SEIKI (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- UNION TOOL (0)
- SPEED TIGER (0)
- FUKUDA (0)
- ESCO (0)
- WERA (0)
- KYOWA SEIKO (0)
- FUJIGEN (0)
- BIG KAISER (0)
- 7 LEADERS (0)
- WATERMILLS (0)
- TRUSCO NAKAYAMA (0)
- METABO (0)
- MAKOTOLOY (0)
- ASAHI TOOLS (0)
- NINE9 (0)
- DIXI (0)
- ALPEN (0)
- ILIX (0)
- EIKOSHA (0)
- DAIICHITOOL (0)
- OKAZAKI SEIKO (0)
- REX TOOLS (0)
- DIJET (0)
- TAIYO-TOOL (0)
- WOLFCRAFT (0)
- ATOM (0)
- YAMAWA MFG (0)
- NOGAJAPAN (0)
- SANKO MFG (0)
- NAKAJIMAKOUKI (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.