Chamfer, V-Grooves（work material：High Hardness Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 38.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 48.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.- Volume Discount
Configure nowStarting from∗ ： 98.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 71.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 42.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 64.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 39.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 33.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 43.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 17.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LS-LDS
OSG
90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.Configure nowStarting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LDS
OSG
90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.Configure nowStarting from∗ ： 357.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner, Rounding Shape, FX-ECR
OSG
Specialized R chamfering tools. As high toughness cemented carbide alloy was used as the base material, it is able to handle a wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 61.45 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Configure nowStarting from∗ ： 84.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 44.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Configure nowStarting from∗ ： 111.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.- Volume Discount
Configure nowStarting from∗ ： 92.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NEW Chamfering Drill
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSS- Volume Discount
Configure nowStarting from∗ ： 32.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 113.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Double Sided Chamfering Cutter 45° DFC
THE CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Configure nowStarting from∗ ： 241.52 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 59.45 € Min. Shipping Days ： Quote *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | IWATA TOOL | SANDVIK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | IWATA TOOL | IWATA TOOL | NT TOOL | SANDVIK | NS TOOL | THE CUT | SANDVIK |
| Product Series | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | TS coated carbide chamfering end mill, 3-flute / short model | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling | |||||||||||||||||
| CAD |
|
|
|
|
|
|
| |||||||||||||||||||||
| Starting from∗ | 38.81 € *Unit price with basic configuration Volume Discount | 48.89 € *Unit price with basic configuration Volume Discount | 98.33 € *Unit price with basic configuration Volume Discount | 116.80 € *Unit price with basic configuration | 71.59 € *Unit price with basic configuration Volume Discount | 42.10 € *Unit price with basic configuration Volume Discount | 46.59 € *Unit price with basic configuration Volume Discount | 73.44 € *Unit price with basic configuration Volume Discount | 64.97 € *Unit price with basic configuration Volume Discount | 39.98 € *Unit price with basic configuration Volume Discount | 42.61 € *Unit price with basic configuration Volume Discount | 33.33 € *Unit price with basic configuration Volume Discount | 43.97 € *Unit price with basic configuration Volume Discount | 42.86 € *Unit price with basic configuration Volume Discount | 17.24 € *Unit price with basic configuration | 295.75 € *Unit price with basic configuration | 357.80 € *Unit price with basic configuration | 61.45 € *Unit price with basic configuration Volume Discount | 88.29 € *Unit price with basic configuration Volume Discount | 84.50 € *Unit price with basic configuration | 44.76 € *Unit price with basic configuration Volume Discount | 111.05 € *Unit price with basic configuration | 92.00 € *Unit price with basic configuration Volume Discount | 32.20 € *Unit price with basic configuration Volume Discount | 113.30 € *Unit price with basic configuration | 111.08 € *Unit price with basic configuration | 241.52 € *Unit price with basic configuration | 59.45 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | Quote |
| Specifications |
|
|
|
|
| |||||||||||||||||||||||
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Hole Chamfer / V Groove | - |
| Tip angle (θ) | 60 ～ 120 | 90 | 90 | 90° | 60 ～ 120 | 90 | 90 | - | - | - | - | - | - | - | 90 | 90 | 90 | - | 90 | 90 | - | 60 | 90 | 90 | - | 45° | - | - |
| Tool Diameter (D)(mm) | 3 ～ 12 | 3 ～ 12 | 0.6 ～ 4 | 8 ～ 12 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | - | - | - | - | - | - | - | 3 ～ 25 | 16 ～ 25 | 16 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | - | 0.6 ～ 4 | 0.1 ～ 1.5 | - | 6 ～ 20 | 4 ～ 6 | 11 ～ 20 | 3.17 ～ 20 |
| work material | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[◎] | High Hardness Steel[◎] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] | High Hardness Steel[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade / Double-edged | Single blade | Single blade | - | - |
| Peripheral Blade Y/N | Available | Available | N/A | N/A | N/A | N/A | Available | N/A | Available | Available | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | - | - |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | - | - |
| Coating Type | TS | TS | Other | Other | TS | TS | TS | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | TS | TiCN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiCN | Other | ALT | - | - | TiAlN | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 7.92
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 9.53
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 15.88
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand
-
- OSG (7)
- IWATA TOOL (3)
- SANDVIK (3)
- NS TOOL (1)
- NT TOOL (1)
- THE CUT (1)
- BIG KAISER (0)
- MAPAL (0)
- STAR-M (0)
- FUJIGEN (0)
- UNION TOOL (0)
- DAIICHITOOL (0)
- DIJET (0)
- OKAZAKI SEIKO (0)
- DIXI (0)
- SPEED TIGER (0)
- FUKUDA (0)
- EIKOSHA (0)
- SANKO MFG (0)
- GUHRING (0)
- 7 LEADERS (0)
- NOGAJAPAN (0)
- MAKOTOLOY (0)
- TAIYO-TOOL (0)
- KYOWA SEIKO (0)
- ASAHI TOOLS (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfer, V-Grooves
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.