EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

S
S
S
S

Discontinued Products

CONCAR V Belt（Page 3）

104

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

V-Belt - Profile 36 x 14

V-Belt - Profile 36 x 14

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 36
・Height(mm): 14
・Angle(°): 30
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	60.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 37 x 10

V-Belt - Profile 37 x 10

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 37
・Height(mm): 10
・Angle(°): 28
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	53.05 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 39 x 16

V-Belt - Profile 39 x 16

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 39
・Height(mm): 16
・Angle(°): 28
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	79.90 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 41 x 13

V-Belt - Profile 41 x 13

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 41
・Height(mm): 13
・Angle(°): 27
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	73.92 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 47 x 10

V-Belt - Profile 47 x 10

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 47
・Height(mm): 10
・Angle(°): 28
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	79.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 52 x 16

V-Belt - Profile 52 x 16

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 52
・Height(mm): 16
・Angle(°): 27
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	116.89 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 55 x 16

V-Belt - Profile 55 x 16

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 55
・Height(mm): 16
・Angle(°): 28
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	124.31 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 65 x 20

V-Belt - Profile 65 x 20

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 65
・Height(mm): 20
・Angle(°): 30
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	251.03 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V-Belt - Profile 70 x 18

V-Belt - Profile 70 x 18

CONCAR

[Specifications]
・Type: open-edge, serrated
・Material: Neoprene
・Width(mm): 70
・Height(mm): 18
・Angle(°): 28
・Standard: DIN 7719 / ISO 1604

ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

Starting from^∗ ：	228.64 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Wide Belt - Profile 3M, Single Belt

Wide Belt - Profile 3M, Single Belt

CONCAR

[Specifications]
・Material: Polyurethane
・Width(mm): 3
・Height(mm): 2
・Angle(°): 60

Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.

Starting from^∗ ：	16.06 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Wide Belt - Profile 5M, Single Belt

Wide Belt - Profile 5M, Single Belt

CONCAR

[Specifications]
・Material: Polyurethane
・Width(mm): 5
・Height(mm): 3
・Angle(°): 60

Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
・Wide Belt - Profile 5M, Single Belt

Starting from^∗ ：	24.37 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Wide Belt - Profile 5MS, Composite Belt

Wide Belt - Profile 5MS, Composite Belt

CONCAR

[Specifications]
・Material: Polyurethane
・Width(mm): 5
・Height(mm): 3
・Angle(°): 60

Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
・Wide Belt - Profile 5MS, Composite Belt

Starting from^∗ ：	49.71 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Wide Belt - Profile 7M, Single Belt

Wide Belt - Profile 7M, Single Belt

CONCAR

[Specifications]
・Material: Polyurethane
・Width(mm): 7
・Height(mm): 5
・Angle(°): 60

Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
・Wide Belt - Profile 5MS, Composite Belt
・Wide Belt - Profile 7M, Single Belt

Starting from^∗ ：	35.12 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Wide Belt - Profile 7MS, Composite Belt

Wide Belt - Profile 7MS, Composite Belt

CONCAR

[Specifications]
・Material: Polyurethane
・Width(mm): 7
・Height(mm): 5
・Angle(°): 60

Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
・Wide Belt - Profile 5MS, Composite Belt
・Wide Belt - Profile 7MS, Composite Belt

Starting from^∗ ：	70.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Belt-shaped
Number of Columns
Effective Circumference(mm)
Properties
Additional Function


Brand	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR
Product Series	V-Belt - Profile 36 x 14	V-Belt - Profile 37 x 10	V-Belt - Profile 39 x 16	V-Belt - Profile 41 x 13	V-Belt - Profile 47 x 10	V-Belt - Profile 52 x 16	V-Belt - Profile 55 x 16	V-Belt - Profile 65 x 20	V-Belt - Profile 70 x 18	Wide Belt - Profile 3M, Single Belt	Wide Belt - Profile 5M, Single Belt	Wide Belt - Profile 5MS, Composite Belt	Wide Belt - Profile 7M, Single Belt	Wide Belt - Profile 7MS, Composite Belt
Starting from^∗	60.98 € *Unit price with basic configuration	53.05 € *Unit price with basic configuration	79.90 € *Unit price with basic configuration	73.92 € *Unit price with basic configuration	79.26 € *Unit price with basic configuration	116.89 € *Unit price with basic configuration	124.31 € *Unit price with basic configuration	251.03 € *Unit price with basic configuration	228.64 € *Unit price with basic configuration	16.06 € *Unit price with basic configuration	24.37 € *Unit price with basic configuration	49.71 € *Unit price with basic configuration	35.12 € *Unit price with basic configuration	70.91 € *Unit price with basic configuration
Min. Shipping Days ：	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days
Belt-shaped	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of Columns	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Effective Circumference(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Properties	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Additional Function	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...

Filter by:

Narrow search by specifying spec./dim.

Belt-shaped
3V

5V

8V

A

AX

B

BX

C

CX

D

K

LA/LB/LC

M

MB
Clear

Number of Columns
1 Row

2 Rows

3 Rows

4 Rows

5 Rows

6 Rows

7 Rows

8 Rows

9 Rows

10 Rows

12 Rows or More
Clear

Effective Circumference(mm)
1,016

1,041

1,067

1,092

1,118

1,143

1,168

1,194

1,207

1,219

1,245

1,295

1,321

1,346

1,372

1,397

1,422

1,448

1,473

1,499

1,524

1,549

1,575

1,626

1,651

1,676

1,702

1,727

1,753

1,778

1,803

1,829

1,854

1,880

1,905

1,930

1,956

1,981

2,007

2,032

2,057

2,083

2,108

2,134

2,159

2,184

2,210

2,235

2,261

2,286

2,311

2,337

2,362

2,388

2,413

2,438

2,464

2,489

2,515

2,540

2,565

2,591

2,616

2,642

2,667

2,692

2,718

2,743

2,769

2,794

2,819

2,845

2,870

2,896

2,921

2,946

2,972

2,997

3,023

3,048

3,073

3,099

3,124

3,150

3,175

3,200

3,226

3,251

3,277

3,302

3,327

3,353

3,378

3,404

3,429

3,454

3,480

3,505

3,531

3,556

3,581

3,607

3,632

3,658

3,683

3,708

3,734

3,759

3,785

3,810

3,835

3,861

3,886

3,912

3,937

3,962

3,988

4,013

4,039

4,064

4,089

4,115

4,140

4,166

4,191

4,216

4,242

4,267

4,293

4,318

4,343

4,369

4,394

4,420

4,470

4,496

4,521

4,547

4,572

4,597

4,623

4,648

4,674

4,724

4,750

4,775

4,801

4,851

4,877

4,902

4,928

4,953

4,978

5,004

5,029

5,055

5,080

5,334

5,385

5,410

5,842

5,994

6,731

7,620

8,001

8,509

9,017

243

250

260

270

280

290

300

305

307

310

315

320

325

330

340

345

350

355

356

360

365

370

375

380

381

385

387

390

395

400

406

410

412

420

425

430

432

437

440

450

457

460

470

475

480

483

490

500

508

510

515

520

530

533

540

550

559

560

580

584

600

610

613

615

635

640

650

660

673

686

690

710

711

737

760

762

787

800

813

838

851

864

875

889

902

914

940

952

953

965

975

991

1016

1041

1067

1080

1090

1092

1118

1143

1150

1168

1194

1207

1219

1245

1270

1295

1321

1346

1346.2

1360

1372

1397

1400

1422

1422.4

1448

1450

1473

1499

1524

1549

1575

1600

1600.2

1626

1649

1650

1651

1676

1700

1701.8

1702

1727

1753

1778

1803

1803.4

1829

1854

1880

1905

1930

1956

1981

2007

2032

2057

2083

2108

2134

2159

2184

2210

2235

2261

2286

2300

2311

2337

2362

2388

2413

2438

2464

2489

2515

2540

2565

2591

2616

2642

2667

2692

2692.4

2718

2743

2769

2794

2819

2844.8

2845

2870

2896

2921

2946

2972

2997

2997.2

3023

3048

3073

3099

3124

3150

3175

3200

3226

3251

3277

3302

3327

3353

3378

3404

3429

3454

3480

3505

3531

3556

3581

3607

3632

3658

3683

3708

3734

3759

3785

3810

3835

3861

3886

3912

3919

3937

3962

3988

4013

4039

4064

4089

4115

4140

4166

4191

4216

4242

4267

4293

4318

4343

4369

4394

4420

4445

4470

4496

4521

4547

4572

4597

4623

4648

4674

4699

4724

4750

4775

4801

4826

4851

4877

4902

4928

4950

4953

4978

5004

5029

5055

5080

5334

5384.8

5385

5563

5588

5689.6

5690

5842

5994

5994.4

6096

6350

6604

6731

6858

7112

7620

7874

8001

8382

8509

9017

10795

14224
Clear

Properties
- Standard
- High power transmission
- Bending-Resistant
- Heat Resistant
- Oil Resistant
- Static electricity prevention
- Abrasion Resistant
Clear

Additional Function
- N/A
- Notched
- Cog Shape
Clear

Narrow search by specifying Brand

- CONCAR (104)
- GATES (33)
- MITSUBOSHI BELTING (31)
- BANDO (16)
- CONTITECH (13)
- MEGADYNE (6)
- OPTIBELT (6)
- NORELEM (2)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Categories related to V Belt

- V Belt Pulleys, Idlers
- V Belt

Top of the page

Payment Method

On-Demand Manufacturing

Change View

Mobile
PC

Certificates

MISUMI worldwide

Country/Region/Language

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.