ESCO Vehicle Maintenance Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Bearing Seal Puller EA510ZD-3
ESCO
【Product Specifications】
・Handle with a hammer (dia. 45 x 380mm)
・Tip bar x 2 pcs (dia. 8 x 100mm, 300mm)
・50 tip screws included
・This product applies a shock with the center hammer to hammer the tip into the seal so that the oil seal can be removed easily without damaging the housing and shaft.
・Case dim.-120 x 410 x 50mmStarting from∗ ： 548.98 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Quad Brake Pad Spreader EA604FB-4
ESCO
【Product Specifications】
・Material- steel
・Plate opening figure-25 to 65mm
・This product can be used with the 4-piston brake caliper mounted on the hub.
・For insertion and removal of disc brake piston.
・With it, you can easily push in the disc brake piston.Starting from∗ ： 151.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Funnel (With Adapter) EA992BL-10A
ESCO
【Product Specifications】
・For pouring radiator liquid
・To prevent LLC from sticking to the inside of engine room.
・Suitable for most Japan-made and imported vehicles, and light trucks
・Can be used for the screw-in types of Ford and GM vehicles.
・Accessories-Bottom stopper handle, adaptor with gasket(5 pcs), radiator cap x(4 pcs), 45 degrees elbow(2 pcs), extension bar(127mm)Starting from∗ ： 96.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tube Bender (for Brake Pipe) EA215XA
ESCO
【Product Specifications】
・A brake pipe can be bent without twist or damage.
・Compatible pipe dia.-3/16
・Full length-235mmStarting from∗ ： 101.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose Clamp Tool EA463PA-1
ESCO
【Product Specifications】
・For flat (flat plate) hose clamp
・For work in inaccessible places
・Clamp range-Up to 54mm
・Clamp width-Up to 12mm
・Ratchet type
・Cable length-600mmStarting from∗ ： 104.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hose Clamp Tool EA463PH-2
ESCO
【Product Specifications】
・For flat (flat plate) hose clamp
・360° swivel tip
・Full length--2： 240mm, -3： 230mm
・Shape…StraightStarting from∗ ： 58.83 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Pulley Remover EA500-150
ESCO
【Product Specifications】
・German steel
・Tough claws specific to the German steel
・The narrow screw pitches allow easy removal.
・Claw--100 to -500： 2 pcs, B-100 to -500： 3 pcs
・Max. dia.…150mm
・Arm depth…150mm
・Weight…1.0kgStarting from∗ ： 107.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Universal 2-Claw Puller EA500AA-120
ESCO
【Product Specifications】
・If using this tool for the V-pulley of more than double belts, this tool ensures a secure bite on the pulley because the arm moves in parallel.
・German steel
・Max. dia.…120mm
・Arm depth…100mm
・Weight…1.2kgStarting from∗ ： 149.40 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
![[Biting Strengthen Type] Puller EA500AC-100](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007098269_001.jpg?$product_view_b$)
[Biting Strengthen Type] Puller EA500AC-100
ESCO
【Product Specifications】
・German steel
・Tightening the shaft strengthens the arm grip.
・Claw-AC-100 to -375： 2 pcsBC-100 to -250： 3 pcs
・Max. dia.…100mm
・Arm depth…100mm
・Weight…0.5kgStarting from∗ ： 83.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pulley Remover EA500B-100
ESCO
【Product Specifications】
・German steel
・Tough claws specific to the German steel
・The narrow screw pitches allow easy removal.
・Claw--100 to -500： 2 pcs, B-100 to -500： 3 pcs
・Max. dia.…100mm
・Arm depth…100mm
・Weight…0.6kgStarting from∗ ： 100.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pulley Remover EA500B-150
ESCO
【Product Specifications】
・German steel
・Tough claws specific to the German steel
・The narrow screw pitches allow easy removal.
・Claw--100 to -500： 2 pcs, B-100 to -500： 3 pcs
・Max. dia.…150mm
・Arm depth…150mm
・Weight…1.4kgStarting from∗ ： 136.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pulley Remover EA500B-250
ESCO
【Product Specifications】
・German steel
・Tough claws specific to the German steel
・The narrow screw pitches allow easy removal.
・Claw--100 to -500： 2 pcs, B-100 to -500： 3 pcs
・Max. dia.…250mm
・Arm depth…220mm
・Weight…3.3kgStarting from∗ ： 234.88 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Pulley Remover EA500B-300
ESCO
【Product Specifications】
・German steel
・Tough claws specific to the German steel
・The narrow screw pitches allow easy removal.
・Claw--100 to -500： 2 pcs, B-100 to -500： 3 pcs
・Max. dia.…300mm
・Arm depth…280mm
・Weight…7.0kgStarting from∗ ： 405.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pulley Remover EA500B-65
ESCO
【Product Specifications】
・German steel
・For battery terminals and precision machines
・Claw--80： 2 pcs, B-65, -80： 3 pcs
・Max. dia.…65mm
・Arm depth…65mm
・Weight…0.3kgStarting from∗ ： 99.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pulley Remover EA500B-80
ESCO
【Product Specifications】
・German steel
・For battery terminals and precision machines
・Claw--80： 2 pcs, B-65, -80： 3 pcs
・Max. dia.…80mm
・Arm depth…80mm
・Weight…0.35kgStarting from∗ ： 82.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Arm Puller EA500BV-150
ESCO
【Product Specifications】
・Reversible type arm which can use two types of claws (Inner/outer removal is allowed.)
・The arm is automatically tightened during operation.
・Ideal for work in narrow places
・German steel
・Max. dia.…150mm
・Arm depth…85mm
・Weight (kg)…0.9Starting from∗ ： 121.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Puller Kit EA500KZ
ESCO
【Product Specifications】
・Can be used as external or internal pullers.
・Capacity-Internal： 50 to 280mm, external： 30 to 250mm
・Arm length-80mm, 120mm, 180mm (two-way)
・German steel
・Total weight-8.3kgStarting from∗ ： 618.37 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 68.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pit Man Arm Puller EA501AD-3
ESCO
【Product Specifications】
・This can grip the pitman arm firmly by tightening horizontally with 2 bolts.
・Forged steel
・Weight--3： approx. 2kg, -4： approx. 1.4kg
・Max. opening…57mm
・Application…For middle- and large-sized vehiclesStarting from∗ ： 148.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Cutter EA501C-2
ESCO
【Product Specifications】
・Full length--2： 119mm-3： 132mm-5： 169mm
・With spare pin
・Material-Forged steel body
・This tool allows easy cutting of a single chain of vehicles and transmission machines.
・Compatible chain…1/4"
・Count…#25Starting from∗ ： 56.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Chain Cutter EA501C-3
ESCO
【Product Specifications】
・Full length--2： 119mm-3： 132mm-5： 169mm
・With spare pin
・Material-Forged steel body
・This tool allows easy cutting of a single chain of vehicles and transmission machines.
・Compatible chain…3/8"
・Count…#35Starting from∗ ： 66.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Cutter EA501C-5
ESCO
【Product Specifications】
・Full length--2： 119mm-3： 132mm-5： 169mm
・With spare pin
・Material-Forged steel body
・This tool allows easy cutting of a single chain of vehicles and transmission machines.
・Compatible chain…3/8" to 5/8"
・Count…#35・40・50Starting from∗ ： 90.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Cutter EA501C-8
ESCO
【Product Specifications】
・Ratchet mechanism handle
・This tool allows easy cutting of a single chain of vehicles and transmission machines. The handle equipped with a cushion for holding the vise
・Full length- -6： 213mm-8： 250mm
・With spare pin
・Material-Forged steelbody
・Compatible chain…1"
・Count…#80Starting from∗ ： 124.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Puller EA501CB-6
ESCO
【Product Specifications】
・Material-Steel
・This is a puller used to connect a chain.
・Maximum height-3： 118mm6： 185mm8： 250mm
・Compatible chain…#60 to #100
・Opening width (mm)…10 to 57Starting from∗ ： 92.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Puller EA501CB-8
ESCO
【Product Specifications】
・Material-Steel
・This is a puller used to connect a chain.
・Maximum height-3： 118mm6： 185mm8： 250mm
・Compatible chain…#80 to #240
・Opening width (mm)…23 to 135Starting from∗ ： 109.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chain Cutter & Riveting tool set EA501CL
ESCO
【Product Specifications】
・For replacing drive chain for motorcycle
・For removal of chain pin, press fitting of joint plate (clip type available), and caulking of joint pin.
・Applicable chain-#420,428,520,525,50(530),532,630,632
・A driving tool such as a 3/8" ratchet handle is required to use this product. (Separately sold)
・With metal caseStarting from∗ ： 398.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Puller Set EA510
ESCO
【Product Specifications】
・Since this grips the bearing entirely, there is no concern of bearing break.
・German steel
・Max. dia.…60mm
・Weight…2.9kgStarting from∗ ： 434.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing & Pulley Puller Set EA510AD
ESCO
【Product Specifications】
・For the bearing, the generator and the power steering
・Capacity-Dia. 76 to 127mm
・Arm depth-25 to 57mm
・Forged steel
・Supplied cap bolts-5/16-18 x 4, 3/8-16 x 2.3/4, 3/8-16 x 3 (2 pcs for each)Starting from∗ ： 191.95 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Internal Bearing Puller EA510D-46
ESCO
【Product Specifications】
・For pulling out the ball bearing, the bearing race and the bearing sleeve
・German steel
・Capacity (hole dia.)…12 to 46mmStarting from∗ ： 890.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Slide-Hammer Puller EA510H-2
ESCO
【Product Specifications】
・Slide-hammer type
・Hole dia.(mm)…15 to 50
・Depth(mm)…50
・Length(mm)…520Starting from∗ ： 269.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slide-Hammer Puller EA510H-3
ESCO
【Product Specifications】
・Slide-hammer type
・Hole dia.(mm)…30 to 180
・Depth(mm)…140
・Length(mm)…630Starting from∗ ： 525.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Insertion Tool Set EA510Z
ESCO
【Product Specifications】
・Applicable dim.-ID： 10 to 50mm, OD： 26 to 110mm
・Set weight-21kg
・Ring-33 pcs
・Sleeve-5 pcsStarting from∗ ： 2,298.41 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Bearing Insertion Tool Set EA510ZA-3
ESCO
【Product Specifications】
・
・Ring x 9 pcs and sleeve for striking x 1 pc
・Ring size-39.8mm(1.565), 44.5mm(1.750), 49.9mm(1.965), 59.1mm(2.325), 62.7mm(2.470), 64.9mm(2.555), 71.9mm(2.830), 76.1mm(2.995), 80.8mm(3.180)
・sleeve length-165mm
・Material-Aluminum
・Case size-270(W)x220(D)x110(H)mm
・Total weight-1.86kg
・Taper side to be used for bearing groove.Starting from∗ ： 188.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Replacing Kit EA510ZD
ESCO
【Product Specifications】
・A bearing without a shaft can also be removed.
・Case dim.-440 x 320 x 90mm
・Weight-7.3kg(Mounting tools)
・Application-ID 10 to 30mm
・Impact ring x 24 types
・Impact sleeve x 2 types
・Double-head shock-less hammer(Removal tools)
・Application-Ball bearing ID： 10 to 30mm (without a shaft)ID： 10 to 85mm (with a shaft)
・Puller bolt x 2 types
・Puller arm x 5 types
・Fixing bar
・Sliding hammer
・ColorStarting from∗ ： 1,873.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Bearing Insertion Tool Set EA510ZD-1
ESCO
【Product Specifications】
・Damage on the bearing when it is inserted is minimized and the work can be performed fast.
・Usable on bushings, seals, and pulleys
・Weight-4.2kg
・Case dim.-440 x 320 x 100mm
・Compatible bearing-ID： 10 to 50mm,OD： 26 to 110mm
・Impact ring x 33 types
・Impact sleeve x 3 types
・Double-head shock-less hammerStarting from∗ ： 1,155.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Puller Set EA510ZD-2
ESCO
【Product Specifications】
・Puller bolt x 2 pcs (large, small)
・Puller arm x 6 types
・Fixing bar x 1 pc
・Support for ball bearings with ID of 10 to 100mmIf the seal is removed, it supports shield type as well.
・This is a puller with a new structure that locks thearm between the inner ring and the outer ring of a bearing.
・Case dim.-310 x 230 x 70mm
・Weight-3.5kgStarting from∗ ： 1,304.49 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Glaze Breaker EA514BL
ESCO
【Product Specifications】
・Full length-350mm
・Capacity-51 to 178mm
・Grinding stone length-76mm
・Shank dia.-6.5mm
・Grain size-#220
・Adjustable grinding pressure
・For removal of sludge from engine cylinder
・Name…Body
・Name…BodyStarting from∗ ： 83.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tire Spreader EA519CT-1
ESCO
【Product Specifications】
・Spreading capacity-100 to 150mm
・Full length-400mm
・Weight-1.7kg
・Material-AluminumStarting from∗ ： 164.18 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Tire Lever EA519FD-600
ESCO
【Product Specifications】
・Full length-600mm
・Chrome plating finish
・Material-Chrome steel alloy
・Weight…1140g
・Thickness…13mmStarting from∗ ： 79.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Belt Wrench EA546YC-180
ESCO
【Product Specifications】
・Applicable max. dia.-180mm
・Belt material-Rubber fabric
・Belt width-22mmStarting from∗ ： 71.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pick Tool Set (4 Pcs) EA566DP
ESCO
【Product Specifications】
・Material-Special steel
・Shaft dia.-3mm
・Full length-150 to 153mm
・Shaft length-80 to 83mmStarting from∗ ： 73.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 69.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Packing Cutter EA576AC-1
ESCO
【Product Specifications】
・Capacity…Dia. 40 to 200mm
・Height…155mm
・Weight…460g
・Material…Steel
・With plastic grip
・With scale
・Adjustable double-cutter type
・For sealing of rubber, leather, plastic, etc.Starting from∗ ： 124.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Double-Sided Punch For Grommet EA576MA-14
ESCO
【Product Specifications】
・Material-Steel
・For grommet of aluminum, brass, stainless steel
・Applicable grommet (ID)…12mmStarting from∗ ： 66.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Double-Sided Punch For Grommet EA576MA-15
ESCO
【Product Specifications】
・Material-Steel
・For grommet of aluminum, brass, stainless steel
・Applicable grommet (ID)…15mmStarting from∗ ： 97.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
![[Biting Strengthen Type] Puller EA500AC-100](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007098269_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Overall Length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 548.98 € *Unit price with basic configuration | 151.66 € *Unit price with basic configuration | 96.55 € *Unit price with basic configuration | 101.10 € *Unit price with basic configuration | 104.90 € *Unit price with basic configuration | 58.83 € *Unit price with basic configuration | 107.14 € *Unit price with basic configuration | 149.40 € *Unit price with basic configuration | 83.16 € *Unit price with basic configuration | 100.17 € *Unit price with basic configuration | 136.75 € *Unit price with basic configuration | 234.88 € *Unit price with basic configuration | 405.51 € *Unit price with basic configuration | 99.10 € *Unit price with basic configuration | 82.37 € *Unit price with basic configuration | 121.97 € *Unit price with basic configuration | 618.37 € *Unit price with basic configuration | 68.29 € *Unit price with basic configuration | 148.50 € *Unit price with basic configuration | 56.36 € *Unit price with basic configuration | 66.75 € *Unit price with basic configuration | 90.23 € *Unit price with basic configuration | 124.00 € *Unit price with basic configuration | 92.33 € *Unit price with basic configuration | 109.41 € *Unit price with basic configuration | 398.17 € *Unit price with basic configuration | 434.71 € *Unit price with basic configuration | 191.95 € *Unit price with basic configuration | 890.90 € *Unit price with basic configuration | 269.66 € *Unit price with basic configuration | 525.83 € *Unit price with basic configuration | 2,298.41 € *Unit price with basic configuration | 188.05 € *Unit price with basic configuration | 1,873.83 € *Unit price with basic configuration | 1,155.48 € *Unit price with basic configuration | 1,304.49 € *Unit price with basic configuration | 83.99 € *Unit price with basic configuration | 164.18 € *Unit price with basic configuration | 79.86 € *Unit price with basic configuration | 71.95 € *Unit price with basic configuration | 73.90 € *Unit price with basic configuration | 69.56 € *Unit price with basic configuration | 124.00 € *Unit price with basic configuration | 66.11 € *Unit price with basic configuration | 97.96 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 7 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 7 Days | 6 Days | 6 Days | 7 Days | 6 Days | 7 Days | 6 Days | 7 Days | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days |
| Product Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Biting Strengthen Type] Puller EA500AC-100](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007098269_001.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Product Type
- Interior related
- Engine Related
- Tire-Related
- Brake Related
- Generic Tool
- For Two-Wheeled Vehicles
-
Overall Length(mm)
Narrow search by specifying Brand
-
- ESCO (148)
- KTC(KYOTO TOOL) (33)
- MAEDAKINNZOKU (13)
- ASTRO_PRODUCTS (4)
- AMF (2)
- MUROMOTO TEKKO (2)
- PB SWISS TOOLS (2)
- VESSEL (2)
- HASCO (1)
- HIRAI KOGU (1)
- KUKKO (1)
- MITOLOY (1)
- SMATO (1)
- SUNFLAG (1)
- SIGNET (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Vehicle Maintenance Tools
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.