HALDER Push-Down Workpiece Clamps（Type：Hold Down Type）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Screw Jacks / screw jack
HALDER
Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.- 3D CAD data available
Starting from∗ ： 31.07 € Special price Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Down-Thrust Clamps, size 82,5
HALDER
The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.The down-thrust clamps provide the following advantages:- compact footprint- clamping force of up to max. 30 kN via a clamping screw WS 36- clamping head swivels 360°- clamping stroke 30 mm- clamping height max. 250 mm- integrated clamping height stop for safe use- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mm- 3D CAD data available
Starting from∗ ： 1,674.21 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Element Systems
HALDER
[Specifications]
・Type: Hold Down Type
・Arm Height Type: Standard
・Material: Steel
・Wearing parts: Heat-treated steel
Clamping Element Systems.- 3D CAD data available
Starting from∗ ： 277.57 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Clamps, with soft face
HALDER
The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).- 3D CAD data available
Starting from∗ ： 23.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 6.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 13.63 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 8.83 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 26.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with stud with internal hexagon
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Starting from∗ ： 111.53 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Elements
HALDER
Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.- 3D CAD data available
Starting from∗ ： 216.59 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 40.85 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamps, with nose, closed
HALDER
Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.- 3D CAD data available
Starting from∗ ： 102.83 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 23.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Starting from∗ ： 89.78 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with T-Bolt
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Starting from∗ ： 104.11 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with stud
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Starting from∗ ： 101.90 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Compact Clamps
HALDER
The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.Features:- exact and position precise clamping- ease of operation- high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings- continuous, large clamping area- clamping lever entirely retractable for hindrance-free exchange of workpieces- threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.- large adjusting range at constant clamping force- continuous height adjustment by height adaptors 23690.0112/.0116- easy and flexible set up- corrosion-resistant- resistent to dirt and chips- 3D CAD data available
Starting from∗ ： 297.88 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Straight Clamps, short
HALDER
[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
Straight Clamps, short.- 3D CAD data available
Starting from∗ ： 38.52 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Straight Clamps, long
HALDER
[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
・b1(mm): 12.5, 17
Straight Clamps, long- 3D CAD data available
Starting from∗ ： 54.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Tightening Force (Range Selectable)(N) |
| Material |
| Type |
| Type |
| Applicable Tightening Force(N) |
| Stroke S(mm) |
| Arm Height Type |
| Arm Length Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Clamps, slotted, with adjustable counter piece, with stud with internal hexagon | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 31.07 € Special price *Unit price with basic configuration Promotional pricing | 1,674.21 € *Unit price with basic configuration | 277.57 € *Unit price with basic configuration | 23.21 € Special price *Unit price with basic configuration Promotional pricing | 6.84 € Special price *Unit price with basic configuration Promotional pricing | 13.63 € Special price *Unit price with basic configuration Promotional pricing | 8.83 € Special price *Unit price with basic configuration Promotional pricing | 26.68 € Special price *Unit price with basic configuration Promotional pricing | 111.53 € *Unit price with basic configuration | 216.59 € *Unit price with basic configuration | 40.85 € Special price *Unit price with basic configuration Promotional pricing | 102.83 € *Unit price with basic configuration | 23.21 € Special price *Unit price with basic configuration Promotional pricing | 89.78 € *Unit price with basic configuration | 104.11 € *Unit price with basic configuration | 101.90 € *Unit price with basic configuration | 297.88 € *Unit price with basic configuration | 38.52 € *Unit price with basic configuration | 54.00 € *Unit price with basic configuration |
| Min. Shipping Days ： | 3 Days | 4 Days | 3 Days | Same day | Same day | Same day | Same day | Same day | 3 Days | 3 Days | Same day | 3 Days | Same day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
| Tightening Force (Range Selectable)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Type | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type |
| Applicable Tightening Force(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Height Type | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | - | - |
| Arm Length Type | - | - | - | - | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Tightening Force (Range Selectable)(N)
- Up to 100
- 100 to 1000
- 1000 to 3000
- 3000 or More
- up to 8.5
- up to 5.1
-
Material
- Steel
- Stainless Steel
- Aluminum Alloy
- Zinc Alloy
-
Type
- Main Body
- Optional Components
-
Type
-
Applicable Tightening Force(N)
-
Stroke S(mm)
-
Arm Height Type
-
Arm Length Type
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Push-Down Workpiece Clamps
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.