NABEYA Clamp Units (for Manual Tightening)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Swing Clamp S Type
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.- Volume Discount
Starting from∗ ： 60.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 129.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toggle Down Clamp 6830
NABEYA
[Features]
· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.- Volume Discount
Starting from∗ ： 47.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Heavy Duty Toggle Side Clamp 6842PL
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.Starting from∗ ： 156.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Toggle Down Clamp 6833
NABEYA
Hold down toggle clamp 6833 made of EN 1.0038 Equiv. and zinc plating.Starting from∗ ： 114.49 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Vacuum Chuck
NABEYA
[Features]
· Adsorption of workpieces is possible by simply supplying air from a compressor.
· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
· VCM0303E.
· Supply valve can only turn the adsorption ON or OFF.
· VCM0303S.
· Adsorption and air blowing are both possible using the changeover switch.
· The current adsorption force can be confirmed by vacuum pressure gauge.
· Adsorption force can be adjusted by vacuum regulatorStarting from∗ ： 2,454.42 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 5.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Quick Lock
NABEYA
Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.Starting from∗ ： 274.07 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Toggle Down Clamp 6800
NABEYA
[Features]
· 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
· 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Starting from∗ ： 72.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PA Feed Plate for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.- Volume Discount
Starting from∗ ： 15.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
PA Adjustment Bolt for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.- Volume Discount
Starting from∗ ： 15.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 105.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toggle Down Clamp 6803
NABEYA
[Features]
· SS400 and galvanized toggle down clamp 6803.
· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.- Volume Discount
Starting from∗ ： 99.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 90.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Swing Clamp B Type
NABEYA
It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.Starting from∗ ： 355.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Swing Clamp A Type
NABEYA
[Features]
· It can be horizontally swung to attach and remove workpieces.
· Can be used for T-grooves and for tapped holes.
· The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
· Tool-less (with handle).
· Free clamping direction (without guide groove).
· The built-in spring causes it to automatically rise when unclamping.
· Attachments can be mountedStarting from∗ ： 377.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toggle Down Clamp 6832
NABEYA
[Features]
· SS400/galvanized toggle down clamp 6832.
· 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Starting from∗ ： 66.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Toggle Side Clamp 6842
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.Starting from∗ ： 184.17 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Nut Runner Clamp Large Model
NABEYA
A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Clamp bar springs up to easily attach/detach the workpiece.
· Free from troubles such as oil leakage as it does not use oil.Starting from∗ ： 659.44 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Nut Runner Clamp Small Model
NABEYA
[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Use Nut Runner for speedy clamping.
· Clamp cover rotates 90 degrees (rotation direction can be chosen).
· Free from troubles such as oil leakage as it does not use oil.Starting from∗ ： 616.43 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 73.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 330.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bar for Quick Lock
NABEYA
[Features]
· Bar for Quick Lock.
· Annoying thread feeding when clamping is not necessary.
· A one-action clamp that adopts a cam lock mechanism- Volume Discount
Starting from∗ ： 36.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Check Plate for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.- Volume Discount
Starting from∗ ： 5.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Clamp Part of Wedge Clamp (for T-Shaped Grooves)
NABEYA
For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.Starting from∗ ： 195.85 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 320.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Swing Clamp Holder S Type
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.- Volume Discount
Starting from∗ ： 26.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Swing Clamp Height Adjusting Support
NABEYA
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.- Volume Discount
Starting from∗ ： 102.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Double Swing Clamp S Type
NABEYA
This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.- Volume Discount
Starting from∗ ： 84.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toe Adjusting Clamp TCH Type
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.Starting from∗ ： 258.73 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 155.91 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Base Unit 7110F
NABEYA
It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Starting from∗ ： 548.14 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Base Unit 7110FA
NABEYA
It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Starting from∗ ： 1,019.75 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hold Clamp, Stopper
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Starting from∗ ： 190.51 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hold Clamp Set
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Starting from∗ ： 273.29 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mini Low Height Clamp
NABEYA
With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.Starting from∗ ： 198.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 110.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Clamp Part of Wedge Clamp (for Tapped Holes)
NABEYA
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.Starting from∗ ： 125.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Side Clamp Jack
NABEYA
It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustmentStarting from∗ ： 150.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Side Jack B Type
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· The tap hole opening is horizontal to the table. With stopper bolt.- Volume Discount
Starting from∗ ： 89.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Side Jack E Type
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machinesStarting from∗ ： 343.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Side Jack F Type
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step partStarting from∗ ： 371.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 339.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Double Swing Clamp Set S Type
NABEYA
This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.Starting from∗ ： 107.34 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Toe Adjusting Clamp
NABEYA
[Features]
· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
· Lifting prevention (generates force in the downward direction).
· Ideal for thin workpieces.
· Dovetail groove can withstand lateral force.
· Free Mounting PositionStarting from∗ ： 427.55 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 60.88 € *Unit price with basic configuration Volume Discount | 129.93 € *Unit price with basic configuration | 47.53 € *Unit price with basic configuration Volume Discount | 156.27 € *Unit price with basic configuration | 114.49 € *Unit price with basic configuration | 2,454.42 € *Unit price with basic configuration | 5.94 € *Unit price with basic configuration Volume Discount | 274.07 € *Unit price with basic configuration | 72.64 € *Unit price with basic configuration | 15.09 € *Unit price with basic configuration Volume Discount | 15.09 € *Unit price with basic configuration Volume Discount | 105.57 € *Unit price with basic configuration | 99.55 € *Unit price with basic configuration Volume Discount | 90.29 € *Unit price with basic configuration | 355.36 € *Unit price with basic configuration | 377.95 € *Unit price with basic configuration | 66.26 € *Unit price with basic configuration | 184.17 € *Unit price with basic configuration | 659.44 € *Unit price with basic configuration | 616.43 € *Unit price with basic configuration | 73.36 € *Unit price with basic configuration Volume Discount | 330.25 € *Unit price with basic configuration | 36.29 € *Unit price with basic configuration Volume Discount | 5.06 € *Unit price with basic configuration Volume Discount | 195.85 € *Unit price with basic configuration | 320.13 € *Unit price with basic configuration | 26.83 € *Unit price with basic configuration Volume Discount | 102.02 € *Unit price with basic configuration Volume Discount | 84.55 € *Unit price with basic configuration Volume Discount | 258.73 € *Unit price with basic configuration | 155.91 € *Unit price with basic configuration | 548.14 € *Unit price with basic configuration | 1,019.75 € *Unit price with basic configuration | 190.51 € *Unit price with basic configuration | 273.29 € *Unit price with basic configuration | 198.36 € *Unit price with basic configuration | 110.57 € *Unit price with basic configuration Volume Discount | 125.60 € *Unit price with basic configuration | 150.00 € *Unit price with basic configuration | 89.39 € *Unit price with basic configuration Volume Discount | 343.67 € *Unit price with basic configuration | 371.60 € *Unit price with basic configuration | 339.86 € *Unit price with basic configuration | 107.34 € *Unit price with basic configuration | 427.55 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | Same day | 7 Days | 7 Days | 7 Days | 5 Days | 7 Days | 5 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 8 Days | 8 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 7 Days |
Loading...
Categories related to Clamp Units (for Manual Tightening)
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.