OSG Screw-Hole-Related Tools（Hole type：For through hole）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Taper Tap Series for Pipes General Applications TPT
OSG
For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items- Volume Discount
Starting from∗ ： 17.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Starting from∗ ： 19.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Starting from∗ ： 8.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Starting from∗ ： 7.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series for Steel NRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Starting from∗ ： 10.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Starting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Starting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hard Hand Tap, OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 60.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 88.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Starting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT
OSG
Used for machining of pipe taper female threads, but is suitable for easy processing conditionsStarting from∗ ： 45.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for Stainless Steel, EX-SUS-HT
OSG
Suited for machining stainless steel, heat-resistant steel, and nickel manganese steel. Cut carbon steel and alloy steel as well.- Volume Discount
Starting from∗ ： 10.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for Difficult-to-Machine Material, CPM-HT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 11.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap OT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Starting from∗ ： 85.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Starting from∗ ： 117.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 25.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Starting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT
OSG
Ideal for removing weld spatter and cutting chips inside the internal thread.
Tool material: vanadium high-speed steel
Coating: surface treatment, uncoated
Number of threads on chamfer: 5P
Accuracy (grade) 0.06- Volume Discount
Starting from∗ ： 8.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Parallel Tap Series for Pipes General Applications SPT
OSG
For use when machining parallel female pipe taper threads and female pipe parallel threads- Volume Discount
Starting from∗ ： 14.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Starting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 14.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT
OSG
Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.Starting from∗ ： 22.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
OSG
Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3- Volume Discount
Starting from∗ ： 83.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT
OSG
When cutting aluminum (cast, rolled and forged) and other light alloys, this is suitable as a countermeasure for obstruction from metal shavings, or when the objective is extending the tap usage life.Starting from∗ ： 42.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap HL-HT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Starting from∗ ： 12.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap, Long Shank, HL-LT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Starting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Starting from∗ ： 16.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
OSG
Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface- Volume Discount
Starting from∗ ： 26.47 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, General Long Shank, EX-LT
OSG
Long shank type.
Tool material: vanadium high-speed steel
Working material: general steel / cast iron / aluminium / copper.- Volume Discount
Starting from∗ ： 17.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for Resin, EX-PLA-HT
OSG
Primarily suited for heat hardened resins such as phenol (Bakelite), epoxy, urea, melamine.- Volume Discount
Starting from∗ ： 10.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT
OSG
Suitable for massive tapping of aluminum alloy castings by high precision automatic machineStarting from∗ ： 66.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT
OSG
Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) TappingStarting from∗ ： 83.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Starting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet DR-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Starting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coated, V-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping- Volume Discount
Starting from∗ ： 24.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coating, Long Shank, V-LT-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-TappingStarting from∗ ： 23.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT
OSG
Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.- Volume Discount
Starting from∗ ： 11.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT
OSG
Shows the great sharpness and durability when used in through holes of machinability bad stainless steel- Volume Discount
Starting from∗ ： 14.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Homo Treatment, EX-H-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 8.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 14.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Starting from∗ ： 30.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Starting from∗ ： 21.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT | Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT | Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT | Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT | Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT | Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT | Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT | Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT | Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT | Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT | Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT | ||||||||||||||||||||||||||||||
| Starting from∗ | 17.00 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 19.66 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.29 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 60.78 € *Unit price with basic configuration | 88.83 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 45.80 € *Unit price with basic configuration | 10.09 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 85.84 € *Unit price with basic configuration | 117.30 € *Unit price with basic configuration | 25.83 € *Unit price with basic configuration Volume Discount | 101.50 € *Unit price with basic configuration Volume Discount | 8.39 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.45 € *Unit price with basic configuration Volume Discount | 14.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.43 € *Unit price with basic configuration | 14.02 € *Unit price with basic configuration Volume Discount | 22.41 € *Unit price with basic configuration | 83.34 € *Unit price with basic configuration Volume Discount | 42.36 € *Unit price with basic configuration | 12.11 € *Unit price with basic configuration Volume Discount | 22.83 € *Unit price with basic configuration | 16.26 € *Unit price with basic configuration Volume Discount | 26.47 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 17.31 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.52 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 66.96 € *Unit price with basic configuration | 83.15 € *Unit price with basic configuration | 205.83 € *Unit price with basic configuration | 295.75 € *Unit price with basic configuration | 165.90 € *Unit price with basic configuration | 22.83 € *Unit price with basic configuration Volume Discount | 24.73 € *Unit price with basic configuration Volume Discount | 23.17 € *Unit price with basic configuration | 11.81 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 14.35 € *Unit price with basic configuration Volume Discount | 8.22 € *Unit price with basic configuration Volume Discount | 14.02 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 30.20 € *Unit price with basic configuration Volume Discount | 21.73 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | Same day | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days |
| Screw Types | Taper for Pipe | Meter | Meter / Unified / Whitworth / Sewing Machine | Meter / Unified / Whitworth / Sewing Machine | Meter | Meter / Unified / Whitworth | Meter / Unified | Meter | Meter | Meter / Unified / Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Unified | Unified | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | R1 ～ R7/8 | M1 ～ M45 | No0UN ～ M35 | No0UN ～ M48 | M1.2 ～ M10 | 1UN ～ M42 | 1/2-20UNF ～ M24 | M1.4 ～ M20 | M3 ～ M20 | - | R1 ～ R3/8 | M3 | M3 ～ M48 | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | - | M5 ～ M12 | M1.4 ～ M42 | G1 ～ G7/8 | M3 ～ M12 | M3 ～ M20 | M4 ～ M8 | M3 ～ M12 | M8 | No8UN | No6UN | M2 ～ M24 | M3 ～ M12 | 3/8UN ～ M12 | M3 | M3 ～ M12 | M2 ～ M20 | - | M6 ～ M12 | - | M3 ～ M24 | M8 ～ M10 | M4 ～ M6 | M2 ～ M6 | M3 ～ M24 | M2 ～ M42 | M2 ～ M36 | M3 ～ M14 | M3 ～ M14 |
| Pitch (P), Number of Threading(mm) | 11 ～ 28 | 0.2 ～ 4.5 | 0.25 ～ 80 | 0.25 ～ 80 | 0.25 ～ 1.25 | 0.3 ～ 48 | 0.25 ～ 3 | 0.3 ～ 2.5 | 0.5 ～ 2.5 | 1 ～ 28 | 11 ～ 28 | 0.5 | 0.5 ～ 5 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.25 ～ 32 | 0.8 ～ 1.25 | 0.3 ～ 4.5 | 11 ～ 28 | 0.5 ～ 1.75 | 0.5 ～ 2.5 | 0.7 ～ 1.25 | 0.5 ～ 1.75 | 1.25 | 32 | 32 | 0.4 ～ 3 | 0.5 ～ 1.75 | 0.75 ～ 16 | 0.5 | 0.5 ～ 1.75 | 0.4 ～ 2.5 | 1 ～ 19 | 1 ～ 1.75 | 0.5 ～ 3 | 0.5 ～ 3 | 1 ～ 1.25 | 0.7 ～ 1 | 0.4 ～ 1 | 0.5 ～ 3 | 0.4 ～ 4.5 | 0.4 ～ 4 | 0.5 ～ 2 | 0.5 ～ 2 |
| Chamfer threads (Lcf) | 2.5P | 2P ～ 4P | 1.5P ～ 9P | 5P | 2P ～ 4P | 4P | 5P | 1.5P ～ 3P | 1.5P ～ 3P | - | 3P | 1.5P | 2P ～ 5P | 2P | 2P | - | - | 5P | 5P | 1.5P ～ 4P | 2P ～ 4P | 5P | 2.5P | 2.5P ～ 5P | 2P | 5P | 1.5P | 1.5P ～ 5P | 2.5P ～ 5P | 1.5P ～ 5P | 3P | 1.5P | 3P | - | - | - | 5P | 5P | 5P | 6P | 4P | 5P | 5P | 6P | 5P |
| Tool Material Type | High-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Carbide | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Cobalt HSS | Vanadium High-Speed Steel | Carbide | Cobalt HSS | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Nickel-based alloy (Inconel, etc.)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Tap Type | Tap for pipes | Roll tap | Hand Tap | Point tap | Roll tap | Point tap | Point tap | Hand Tap | Hand Tap | Thread cutter | Tap for pipes | Hand Tap | Hand Tap | Roll tap | Roll tap | Roll tap | Thread cutter | Modification/removal Tool | Point tap | Tap for pipes | Roll tap | Point tap | Spiral Tap | Hand Tap | Roll tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap |
| Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
| Coating Y/N | N/A | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | Available | N/A | Available | N/A | Available | N/A | Available | Available | Available | N/A | N/A | Available | Available | N/A | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | Available | Available |
| Coating Type | Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Other | Non-Coated | Non-Coated | TiAlN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Other | For High Hardness (Silicon Group) / Other | Non-Coated | TiN | Non-Coated | TiN | Non-Coated | Other | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | TiCN / Other | TiN | TiAlN | TiAlN | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN |
| Overall Length (L)(mm) | 55 ～ 170 | 30 ～ 220 | 30 ～ 145 | 30 ～ 185 | 32 ～ 75 | 34 ～ 175 | 34 ～ 120 | 34 ～ 105 | 100 ～ 150 | 60 ～ 120 | 59 ～ 109 | 46 | 46 ～ 185 | 46 ～ 82 | 100 ～ 150 | 80 ～ 150 | 40 | 60 ～ 80 | 34 ～ 175 | 55 ～ 170 | 80 ～ 150 | 100 ～ 150 | 52 ～ 70 | 46 ～ 82 | 150 | 60 | 100 | 40 ～ 120 | 46 ～ 82 | 100 ～ 150 | 46 | 46 ～ 82 | 40 ～ 105 | 80 ～ 210 | 62 ～ 89 | 60 ～ 120 | 100 ～ 200 | 70 ～ 75 | 100 | 40 ～ 62 | 100 ～ 200 | 40 ～ 175 | 80 ～ 300 | 46 ～ 88 | 46 ～ 88 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (11)
- OSG (87)
- YAMAWA MFG (55)
- NACHI(FUJIKOSHI) (12)
- CARMEX (7)
- GUHRING (3)
- TRUSCO NAKAYAMA (3)
- H & H (1)
- RUKO (1)
- WALTER PROTOTYP (1)
- SKC (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.