OSG Screw-Hole-Related Tools（Screw size (Nominal)：M22）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Starting from∗ ： 102.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Starting from∗ ： 140.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Starting from∗ ： 99.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Starting from∗ ： 71.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Starting from∗ ： 73.05 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap- Volume Discount
Starting from∗ ： 87.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Starting from∗ ： 84.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Starting from∗ ： 82.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 83.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT
OSG
Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 115.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Short Chamfer Type, EX-SC-SFT
OSG
Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch- Volume Discount
Starting from∗ ： 78.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Starting from∗ ： 87.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Starting from∗ ： 80.51 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 102.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 151.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT
OSG
Shows the great sharpness and durability when used in through holes of machinability bad stainless steel- Volume Discount
Starting from∗ ： 102.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Homo Treatment, EX-H-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 76.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Starting from∗ ： 152.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 111.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 151.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 76.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Starting from∗ ： 102.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Starting from∗ ： 97.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT | Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT | Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-H | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S | |||||||||||||||||
| Starting from∗ | 102.00 € *Unit price with basic configuration Volume Discount | 140.83 € *Unit price with basic configuration Volume Discount | 99.45 € *Unit price with basic configuration Volume Discount | 71.24 € *Unit price with basic configuration Volume Discount | 73.05 € *Unit price with basic configuration Volume Discount | 87.00 € *Unit price with basic configuration Volume Discount | 84.71 € *Unit price with basic configuration Volume Discount | 82.91 € *Unit price with basic configuration Volume Discount | 83.55 € *Unit price with basic configuration Volume Discount | 115.92 € *Unit price with basic configuration Volume Discount | 78.71 € *Unit price with basic configuration Volume Discount | 87.00 € *Unit price with basic configuration Volume Discount | 80.51 € *Unit price with basic configuration Volume Discount | 102.38 € *Unit price with basic configuration Volume Discount | 151.12 € *Unit price with basic configuration Volume Discount | 102.00 € *Unit price with basic configuration Volume Discount | 76.90 € *Unit price with basic configuration Volume Discount | 152.75 € *Unit price with basic configuration | 111.04 € *Unit price with basic configuration Volume Discount | 151.12 € *Unit price with basic configuration Volume Discount | 76.19 € *Unit price with basic configuration Volume Discount | 102.00 € *Unit price with basic configuration | 97.95 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
| ||||||||||||||||||||||
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 | M22 |
| Pitch (P), Number of Threading(mm) | 1 ～ 2.5 | 1.5 ～ 2.5 | 1 ～ 2.5 | 1 ～ 2.5 | 1 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 2.5 | 1.5 ～ 2.5 | 0.5 ～ 2 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 0.75 ～ 2.5 | 1 ～ 2.5 | 1 ～ 2.5 |
| Chamfer threads (Lcf) | 2.5P | 2P | 5P | 5P | 2.5P | 2.5P | 2.5P | 4P | 5P | 3P | 1.5P | 2.5P | 1.5P ～ 5P | 5P | 5P | 4P | 5P | 6P | 5P | - | - | 2.5P | 5P |
| Tool Material Type | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Alloy HSS | Powder high-speed steel | Powder high-speed steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] |
| Tap Type | Spiral Tap | Roll tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Die | Die | Spiral Tap | Point tap |
| Hole type | For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | - | For blind hole | For through hole |
| Coating Y/N | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | N/A | N/A | Available | N/A | N/A | N/A | Available | Available |
| Coating Type | Other | TiCN | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Other | Other |
| Overall Length (L)(mm) | 115 | 125 ～ 140 | 115 | 115 | 115 | 150 ～ 250 | 115 | 115 | 150 ～ 250 | 115 | 115 | 150 | 85 ～ 115 | 115 | 200 | 200 | 115 | 150 | 115 | - | - | 150 | 150 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1'-12UNF
- 1´-11
- 1-8UNC
- 1'-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.5 - M6
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- SM3/16
- W3/16
- 3/16W24
- M3 - M18
- SM3/32
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- # 6 - 32 UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- TV8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (0)
- OSG (23)
- YAMAWA MFG (15)
- SANDVIK (3)
- NACHI(FUJIKOSHI) (2)
- EIKOSHA (1)
- SKC (1)
- TRUSCO NAKAYAMA (1)
- FEIN (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MATADOR (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- RENNSTEIG (0)
- WERA (0)
- WIHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.