YUKIWA SEIKO Tooling-Related Equipment
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Pull Stud
YUKIWA SEIKO
JBS and MAS standard draw studs.
The shape of the draw stud is manufactured to JIS and MAS standards.
Special sizes not listed above can be manufactured.- Volume Discount
Starting from∗ ： 34.91 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 8.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Manual-Type Tailstock
YUKIWA SEIKO
The pneumatic tailstock TSA/TSB series is a manual type basic tailstock (press cup). For machining 60°center holes close to the end face of a workpiece.Starting from∗ ： 598.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NY Lock Nut
YUKIWA SEIKO
[Features]
A NY-H type lock nut for EY tool holder.
-Type: M-type / H-type / F-type
-Supported collets: EY11,EY12,EY16,EY20,EY25,EY32- Volume Discount
Starting from∗ ： 76.77 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Side Spindle
YUKIWA SEIKO
[Features]
· Use side spindle SS series to support one end of the jig when performing multi-surface machining with a C-type jig.Starting from∗ ： 1,644.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
YUKIWA SEIKS Spring Collet
YUKIWA SEIKO
[Features]
· The spring collet YSS series easily and accurately chucks round workpieces in machining that uses a circular table or indexing table.Starting from∗ ： 107.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lock Nut
YUKIWA SEIKO
[Features]
This product pursues high performance and high quality.
Compatible collets: SG6,SG8,SG10,SG12,SG16,SG20,SG25,SG32
-Compatible spanners: FS20,FS26,FS33,FS36,FS42,FS50,FS62,FS76.- Volume Discount
Starting from∗ ： 62.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Coolant Duct
YUKIWA SEIKO
[Features]
-Coolant channel for HSK holder
[Features]
-Use by mounting in HSK shaft as coolant supply when using through coolant.Starting from∗ ： 89.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pull Stud (with Center Hole)
YUKIWA SEIKO
Pull stud dedicated for center through type machining center.
[Features]
· Pull stud dedicated for center through type machining center- Volume Discount
Starting from∗ ： 46.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Manual Locking System YHL-C For HSK Holder
YUKIWA SEIKO
[Features]
· Clamping and unclamping can be performed with a 120° rotation operation, enabling single-action holder replacement.Starting from∗ ： 1,746.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Manual Type Index Heads
YUKIWA SEIKO
High precision and speedy one-touch operation. Powerfully supports labor-saving.Starting from∗ ： 2,108.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pneumatic Tailstock
YUKIWA SEIKO
The pneumatic tailstock TPA/TPB series is an air-driven type basic tailstock (press cup).Starting from∗ ： 2,076.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chuck Flange
YUKIWA SEIKO
[Features]
· For the chuck flange CF series, install the chuck flange between the table surfaces if attaching the scroll chuck to the CNC circular table or index plate.Starting from∗ ： 137.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Collet Adapter
YUKIWA SEIKO
It is easy to open and close the chuck. Simply insert the attached lever into the hole of the cap outer diameter and turn it. Easy to attach and detach workpieces.Starting from∗ ： 250.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flanged Center
YUKIWA SEIKO
[Features]
· Can be easily used by attaching to a round table or index head table surface.Starting from∗ ： 339.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wrench for Coolant Seal Screw
YUKIWA SEIKO
[Features]
-Coolant seal screw spanner compatible with CSE/CSH type.Starting from∗ ： 19.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Coolant Seal Screw
YUKIWA SEIKO
For Super G1 Chuck
[Features]
· Supports high pressure coolant with a coolant seal screw as part of the setStarting from∗ ： 52.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Length Adjustment Screw
YUKIWA SEIKO
For Super G1 Chuck
[Features]
· Absorbs tool inclination and provides stable runout accuracy by setting an APM type length adjustment screw- Volume Discount
Starting from∗ ： 31.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Wrench for Length Adjustment Screw
YUKIWA SEIKO
[Features]
6 types of keys for coolant seal screws / length adjustment screws (APM type).
Compatible screws: APM6,APM8-1 (2)/APM10-1 (2)/APM12-1 (2)/APM16-1 (2),APM20-1 (2)/APM25-1 (2)/APM32Starting from∗ ： 23.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hook Wrench
YUKIWA SEIKO
[Features]
This product pursues high performance and high quality.
Compatible main bodies: SGC6,SGC8,SGC10,SGC12,SGC16,SGC20,SGC25,SGC32
-Compatible lock nuts: SGN6,SGN8,SGN10,SGN12,SGN16,SGN20,SGN25,SGN32.Starting from∗ ： 12.18 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Super G1 Chuck Runout Adjuster Zero Finder
YUKIWA SEIKO
Supports a standard holder and achieves zero adjustment of the blade tip runout accuracy.
[Features]
· A controller that reduces cutting edge runout to effectively zero for the high accuracy Super G1 Chuck.
· Zerodas is a revolutionary product that does not sacrifice the balance of the holder and vibration of the blade base to ensure vibration of the cutting edge.
· Achieves zero cutting edge runout accuracy.
· Standard holder supported.
· Simple Operation, Attaching and DetachingStarting from∗ ： 317.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Coolant Duct Set Wrench
YUKIWA SEIKO
[Features]
Special accessories for HSK holders
2 types for HISO-TC90 Equiv.0A-SR/HEN 1.1625 Equiv.3A-SRStarting from∗ ： 134.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tool Clamp
YUKIWA SEIKO
[Features]
Special accessories for HSK holder
Main body can be fixed vertically or horizontally.Starting from∗ ： 372.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flange Holder Clamp Set
YUKIWA SEIKO
Clamping and unclamping can be done with a 120° rotation and the holder interchanged with a single action.Starting from∗ ： 1,431.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lock Nut Cover
YUKIWA SEIKO
[Features]
· Prevents adhesion of chips etc. on the screws of the holder body.
· Prevents oil scattering from groove portion of lock nut wrenchStarting from∗ ： 22.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 20.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Length Adjustment Screw with Sealing
YUKIWA SEIKO
[Features]
· A length adjustment screw with a urethane end face seal resistant to water-soluble and oil-based cutting fluids is incorporated, enabling processing without losing oil pressure.
· Replacing the length adjustment screw included in the BT shank, the EY chuck, and other standard components with this length adjustment screw plus seal allows lubrication to be sealed from the rear.
· Covers 5 mm or more oil hole drills: Ends of 5 to 20 mm oil hole drills can be sealed, enabling support of small diameter oil hole drills as wellStarting from∗ ： 22.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Single-Ended Wrench
YUKIWA SEIKO
[Features]
Single spanner included with cutter
Available for PCH6, PCH10.Starting from∗ ： 25.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wrench with Torque Limiter
YUKIWA SEIKO
Since the recommended torque has been set, lock nuts will not be overtightened.Starting from∗ ： 217.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Gauge
YUKIWA SEIKO
[Features]
2 types for collets and tool holders.
·Compatible chucks: TQC25/TQC35Starting from∗ ： 1,932.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Locking Part
YUKIWA SEIKO
[Features]
Yukiwa Seiko, Tooling holder related equipment, locking parts (TQC25-SLP, TQC35-SLP)Starting from∗ ： 451.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Holder Length L(mm) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO |
| Product Series | |||||||||||||||||||||||||||||||
| Starting from∗ | 34.91 € *Unit price with basic configuration Volume Discount | 8.43 € *Unit price with basic configuration Volume Discount | 598.66 € *Unit price with basic configuration | 76.77 € *Unit price with basic configuration Volume Discount | 1,644.92 € *Unit price with basic configuration | 107.43 € *Unit price with basic configuration | 62.61 € *Unit price with basic configuration Volume Discount | 89.31 € *Unit price with basic configuration | 46.59 € *Unit price with basic configuration Volume Discount | 1,746.26 € *Unit price with basic configuration | 2,108.87 € *Unit price with basic configuration | 2,076.10 € *Unit price with basic configuration | 137.28 € *Unit price with basic configuration | 250.83 € *Unit price with basic configuration | 339.23 € *Unit price with basic configuration | 19.34 € *Unit price with basic configuration | 52.79 € *Unit price with basic configuration | 31.34 € *Unit price with basic configuration Volume Discount | 23.14 € *Unit price with basic configuration | 12.18 € *Unit price with basic configuration | 317.80 € *Unit price with basic configuration | 134.28 € *Unit price with basic configuration | 372.93 € *Unit price with basic configuration | 1,431.04 € *Unit price with basic configuration | 22.60 € *Unit price with basic configuration | 20.71 € *Unit price with basic configuration | 22.69 € *Unit price with basic configuration | 25.80 € *Unit price with basic configuration | 217.54 € *Unit price with basic configuration | 1,932.62 € *Unit price with basic configuration | 451.19 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Product Category | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | Machining Centers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spindle types | - | - | - | - | - | - | - | HSK-A | - | - | - | - | - | - | - | - | - | - | - | - | - | HSK-A | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | 40 ～ 63 | - | 63 | - | - | - | - | - | - | - | - | - | - | - | 40 ～ 63 | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Product Category
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
-
Spindle types
-
HSK type
-
Tool Type
- Drill
- Reamer
-
Retainable blade diameter(mm)
-
Holder Length L(mm)
-
Coolant System
- Center Through (Blade Through)
Narrow search by specifying Brand
-
- AMF (44)
- BIG KAISER (35)
- YUKIWA SEIKO (31)
- ESCO (17)
- TRUSCO NAKAYAMA (15)
- TAKURA KOGU (15)
- MANYO TOOLS (11)
- SHOWA TOOL (5)
- THE CUT (5)
- NT TOOL (3)
- NIKKEN KOSAKUSHO (2)
- NEW STRONG (2)
- GIGA SELECTION (1)
- SKC (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Tooling-Related Equipment
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.