Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Locating Units

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 13 Days or Less

?* Information on days to ship and prices

Auto-Latch

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.60 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pneumatic separator with damping

ASUTEC

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	255.57 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Feed Fingers

MISUMI

Volume Discount

Order quantities extended (D-JIT)
Stock

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	Same day

Pneumatic separator without damping

ASUTEC

Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	91.45 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Clamping plates recessed for quarter-turn clamp locks (K1062)

KIPP

· Form B mounting option for plate thickness over 10 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.80 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pneumatic angle damper

ASUTEC

Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	259.33 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Quick Shaft Clamp (QSC)

IMAO CORPORATION

Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing levers, Steel

GANTER

With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).
Limiting the indexing angle can be achieved with two dowels (sketch).
The bushing is connected to the shaft via keyway.
The location flange is bolted to the machine with two socket head cap screws (M 5).

The lever, via the location pin, provides the connection between shaft and location flange.
The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	98.86 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

KIPP

· Locking element for connecting two separate plates

· Click signal when locked

· Form A mounting option: for plate thickness 6 or 12 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.71 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Control levers, Steel

GANTER

Control levers GN 223 can also be supplied as standard with:
Square DIN 79 V + Bore diameter
Keyway DIN 6885 K + Bore diameter

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamping plates surface mounted for quarter-turn clamp locks (K1062)

KIPP

· Form A mounting option: for plate thickness 6 to 10 mm

· Metric fine thread

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.80 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp locks stainless steel, knob plastic (K1061)

KIPP

· Locking element for connecting two separate plates

· Click signal when locked

· Form A mounting option: for plate thickness 6 or 12 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Feed Fingers / Economy

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.19 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Electrical separator with damping

ASUTEC

Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savings

Volume Discount

3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	15 Days

Thumb Turn Clamper (QCTH, QCTHL)

IMAO CORPORATION

Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	51.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Locating cylinder with quick clamping system (K0935)

KIPP

· Fast opening and closing

· Mechanical positioning and clamping system

· Various sizes

· High retaining forces

· For different thicknesses of clamping plate

Select to compare

Configure now
Starting from^∗ ：	107.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Push button latches stainless steel, Form A, with head (K1562)

KIPP

· For connecting machine parts and workpieces quickly and easily

· Mounting option for plate thickness 3 to 27 mm

· Secure locking by simply pressing and releasing the push button

· Ideal for places where space is limited

· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Linear Stop Motion (LSM)

IMAO CORPORATION

Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.

[Features]
· Easy operation and secure locking.
· As clamps with internal spring, clamping is always regular.
· As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.
· Lever direction can be changed by 90° pitch

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	178.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Locating cylinder stainless steel, pneumatic (K1738)

KIPP

· Suitable for automation processes

· Pneumatic actuation

· Compact design

· Rust-free

Select to compare

Configure now
Starting from^∗ ：	104.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp locks, flat stainless steel (K1061)

KIPP

· Locking element for connecting two separate plates

· Ideal for restricted spaces

· Click signal when locked

· Form A mounting option: for plate thickness 6 or 12 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinder stainless steel Ball Lock (K1474)

KIPP

· Reduced machine setup times

· Simple application

Select to compare

Configure now
Starting from^∗ ：	123.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Push button latches stainless steel, Form B, without head (K1562)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.59 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp lock steel, rotary knob stainless steel (K1558)

KIPP

· Locking element for connecting two separate plates

· With retractable shank, ideal for places where space is limited

· Click signal when locked

· Mounting option for plate thickness 6 to 14 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	62.49 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Work Detection Units

MISUMI

[Features] It can be used in places that cannot be directly detected by proximity sensors.

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Quick Shaft Clamp (Air Operation) (QSCA)

IMAO CORPORATION

Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	110.23 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pneumatic positioning unit

ASUTEC

Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	207.97 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pneumatic separator for roller conveyor system with damping

ASUTEC

The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	766.70 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Quarter turn latches, with cross head (K1730)

KIPP

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping plates steel for quarter-turn clamp locks (K1560)

KIPP

· Fastening screws included

· Mounting option for plate thickness starting from 9 mm

· Accessory for quarter-turn clamp lock K1559

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp lock steel, rotary knob plastic (K1558)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Control levers, Steel

GANTER

Control levers GN 211 can be used in connection with indexing elements, grooves for angle limitations and such like due to their comparably big hub diameter.
Spring plungers as well as indexing plungers can be used as indexing elements.
Control levers GN 211 can also be supplied as standard with:
Square DIN 79 V + Bore diameter
Keyway DIN 6885 K + Bore diameter

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.80 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Installation kits for position indicators

GANTER

The installation kits GN 491.1 are required for the attachment of a position indicator to double tube linear actuators. They consist of an adapter shaft and, depending on the position indicator, a torque support including fixing screws.
Mechanical position indicators GN 953 / GN 954 / GN 955 must be ordered so that the counter is aligned with the rising of the trapezoidal thread spindle.
For the position indicators GN 9053 / GN 9054 the respective rising is set at the position indicator for every programming.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mini Adjusting Stopper (BJ211)

IMAO CORPORATION

A stopper that can be adjusted to the desired height. Can also be used as an auxiliary clamp. A short type is also available.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	12.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pneumatic return stop

ASUTEC

Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	59.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Lock bottom parts for quarter turn latches (K1732)

KIPP

· Quick assembly

· Vibration-resistant and tolerance-compensating

· Suitable for all locking pins

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with knurled head (K1730)

KIPP

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with slot head (K1730)

KIPP

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn latches stainless steel rotary knob, stainless steel (K1561)

KIPP

· Locking element for connecting two separate plates

· Click signal when locked

· Ideal where space is restricted:

· Mounting option for plate thickness 6 to 14 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	59.73 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Installation kits for position indicators

GANTER

The GN 295 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	35.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Adjustable Tenison levers, Stainless Steel

GANTER

Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.78 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pneumatic accelerator module

ASUTEC

Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	290.66 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn latches steel rotary knob, plastic (K1561)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Repair set for stainless steel locating cylinders (K1474)

KIPP

· Accessories for Ball Lock stainless steel locating cylinders

Select to compare

Configure now
Starting from^∗ ：	16.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjustable Tension levers, Stainless Steel

GANTER

Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.52 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	ASUTEC	MISUMI	ASUTEC	KIPP	ASUTEC	IMAO CORPORATION	GANTER	KIPP	GANTER	KIPP	KIPP	MISUMI	ASUTEC	IMAO CORPORATION	KIPP	KIPP	IMAO CORPORATION	KIPP	KIPP	KIPP	KIPP	KIPP	MISUMI	IMAO CORPORATION	ASUTEC	ASUTEC	KIPP	KIPP	KIPP	GANTER	GANTER	IMAO CORPORATION	ASUTEC	KIPP	KIPP	KIPP	KIPP	GANTER	GANTER	ASUTEC	KIPP	KIPP	KIPP	GANTER
Product Series	Auto-Latch	Pneumatic separator with damping	Feed Fingers	Pneumatic separator without damping	Clamping plates recessed for quarter-turn clamp locks (K1062)	Pneumatic angle damper	Quick Shaft Clamp (QSC)	Indexing levers, Steel	Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)	Control levers, Steel	Clamping plates surface mounted for quarter-turn clamp locks (K1062)	Quarter-turn clamp locks stainless steel, knob plastic (K1061)	Feed Fingers / Economy	Electrical separator with damping	Thumb Turn Clamper (QCTH, QCTHL)	Locating cylinder with quick clamping system (K0935)	Push button latches stainless steel, Form A, with head (K1562)	Linear Stop Motion (LSM)	Locating cylinder stainless steel, pneumatic (K1738)	Quarter-turn clamp locks, flat stainless steel (K1061)	Locating cylinder stainless steel Ball Lock (K1474)	Push button latches stainless steel, Form B, without head (K1562)	Quarter-turn clamp lock steel, rotary knob stainless steel (K1558)	Work Detection Units	Quick Shaft Clamp (Air Operation) (QSCA)	Pneumatic positioning unit	Pneumatic separator for roller conveyor system with damping	Quarter turn latches, with cross head (K1730)	Clamping plates steel for quarter-turn clamp locks (K1560)	Quarter-turn clamp lock steel, rotary knob plastic (K1558)	Control levers, Steel	Installation kits for position indicators	Mini Adjusting Stopper (BJ211)	Pneumatic return stop	Lock bottom parts for quarter turn latches (K1732)	Quarter turn latches, with knurled head (K1730)	Quarter turn latches, with slot head (K1730)	Quarter-turn latches stainless steel rotary knob, stainless steel (K1561)	Installation kits for position indicators	Adjustable Tenison levers, Stainless Steel	Pneumatic accelerator module	Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)	Quarter-turn latches steel rotary knob, plastic (K1561)	Repair set for stainless steel locating cylinders (K1474)	Adjustable Tension levers, Stainless Steel
CAD	2D / 3D	3D	2D / 3D	3D	2D / 3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D	2D / 3D		2D / 3D
Starting from^∗	18.60 € *Unit price with basic configuration Volume Discount	255.57 € *Unit price with basic configuration Volume Discount	- Volume Discount	91.45 € *Unit price with basic configuration Volume Discount	14.80 € *Unit price with basic configuration	259.33 € *Unit price with basic configuration Volume Discount	42.18 € *Unit price with basic configuration Volume Discount	98.86 € *Unit price with basic configuration Volume Discount	40.71 € *Unit price with basic configuration	15.50 € *Unit price with basic configuration Volume Discount	14.80 € *Unit price with basic configuration	32.38 € *Unit price with basic configuration	16.19 € *Unit price with basic configuration Volume Discount	- Volume Discount	51.51 € *Unit price with basic configuration Volume Discount	107.53 € *Unit price with basic configuration	40.43 € *Unit price with basic configuration	178.78 € *Unit price with basic configuration	104.08 € *Unit price with basic configuration	42.56 € *Unit price with basic configuration	123.35 € *Unit price with basic configuration	38.59 € *Unit price with basic configuration	62.49 € *Unit price with basic configuration	-	110.23 € *Unit price with basic configuration Volume Discount	207.97 € *Unit price with basic configuration Volume Discount	766.70 € *Unit price with basic configuration Volume Discount	2.82 € *Unit price with basic configuration	15.62 € *Unit price with basic configuration	34.91 € *Unit price with basic configuration	16.80 € *Unit price with basic configuration Volume Discount	16.88 € *Unit price with basic configuration Volume Discount	12.82 € *Unit price with basic configuration	59.52 € *Unit price with basic configuration Volume Discount	1.39 € *Unit price with basic configuration	5.65 € *Unit price with basic configuration	2.82 € *Unit price with basic configuration	59.73 € *Unit price with basic configuration	35.60 € *Unit price with basic configuration Volume Discount	29.78 € *Unit price with basic configuration Volume Discount	290.66 € *Unit price with basic configuration Volume Discount	9.53 € *Unit price with basic configuration	37.67 € *Unit price with basic configuration	16.20 € *Unit price with basic configuration	29.52 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	10 Days	Same day	7 Days	4 Days	10 Days	Same day	4 Days	4 Days	Same day	4 Days	4 Days	Same day	15 Days	6 Days	4 Days	4 Days	6 Days	4 Days	4 Days	4 Days	4 Days	4 Days	7 Days	Same day	10 Days	10 Days	4 Days	4 Days	4 Days	5 Days	5 Days	6 Days	5 Days	4 Days	4 Days	4 Days	4 Days	5 Days	4 Days	19 Days	4 Days	4 Days	4 Days	4 Days
Specifications			Order quantities extended (D-JIT) Stock
Type	Support Unit	-	Support Unit	-	-	-	Clamp Unit	-	-	-	-	-	Support Unit	-	Single-Action Mounted Jig	-	-	-	-	-	-	-	-	Workpiece Detection Unit	Clamp Unit	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-