Adjuster（Properties：Standard Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 31/12/2024
Free-Roll Adjuster KC-285
TAKIGEN
Since the main body and the bottom part rotate independently, adjustments can be made after installation.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Leveling Foot, Integrated Type
IWATA MFG
[Features]
· A type in which an adjustment bolt and leveling plate are integrated.
· Since a hardened steel ball rotates 20°, the adjustment angle is flexible.
· Can be used to support level adjustments for heavy machinery from the bottom up.Configure nowStarting from∗ ： 36.97 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Adjuster Pad (Standard Type)
WOOJIN
[Features]
· Since reinforced polyamide is used, it features excellent chemical resistance and oil resistance.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 3.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Level Adjuster (Anchor Type) (KAF)
IMAO CORPORATION
[Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.- Volume Discount
Configure nowStarting from∗ ： 8.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Clamp Plate for Level Adjuster (KACP)
IMAO CORPORATION
[Features] Use KA60 level control for fixing heavy loads.- Volume Discount
Configure nowStarting from∗ ： 3.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)
TRUSCO NAKAYAMA
· Features an anchor hole for fixing to the floor.
· A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
· Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.- Volume Discount
Configure nowStarting from∗ ： 10.85 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Adjustment Pads / Economy
MISUMI
A one-piece levelling pin. [Material]SWRCH- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.89 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 7.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVF100, LVFR100)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 28.77 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK)
IMAO CORPORATION
Features an excellent design.
[Features]
· Height adjustments are performed by manually turning a knob.
· Falling off is prevented by a washer on the end surface of the screw part.- 3D CAD data available
Configure nowStarting from∗ ： 60.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Snap Foot for Light Loads (SLG14, FLG14)
IMAO CORPORATION
A snap-lock type foot for light loads whose leg can be folded. A rubber pad that is strong against abrasion is used for the surface that comes in contact with the ground.
[Features]
· A snap-lock type foot for light loads whose leg can be folded.
· Please use by mounting to the bottom of equipment.
· Operation and checking of the display is made easy by tilting the panel surface.
· A rubber pad that is strong against abrasion is used for the surface that comes in contact with the ground.
· Please use as a pair with the FLG-14 floor foot.- 3D CAD data available
Configure nowStarting from∗ ： 7.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LSA25, LSAR25)
IMAO CORPORATION
- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 6.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 28.73 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVF125, LVFR125)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
[Features]
· The SUS-made uses SUS304 that is excellent for rust prevention.- 3D CAD data available
Configure nowStarting from∗ ： 39.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LSA40, LSAR40)
IMAO CORPORATION
- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 7.45 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 39.88 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA60, LVAR60)
IMAO CORPORATION
- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 9.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Foot Jack
NABEYA
A leveling foot jack that can be used together with an anchor bolt. Convenient for adjusting the levels of machine tools.
[Features]
· Convenient for adjusting the levels of machine tools.
· Can be used together with an anchor bolt.
· Ductile casting is used for the base plate and the load resistance is sufficient.
· The adjustment stroke is large and can be used where ground subsidence is extreme.- 2D CAD data available
Configure nowStarting from∗ ： 61.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Blocks H Model
NABEYA
Ideal for the leveling of large machinery such as large milling machines, turning machines, and boring machines.
[Features]
· Features good precision.
· Can be fixed with an anchor bolt.
· Ideal for large machinery such as large milling machines, turning machines, boring machines, and planer machines.- 2D CAD data available
Configure nowStarting from∗ ： 144.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wedge Block
NABEYA
Capable of 0.1 mm leveling for heavy workpieces.
[Features]
· Capable of accurately adjusting the height without shifting horizontally.
· Capable of 0.1 mm leveling even for heavy workpieces.
· Includes a center hole (ø12)- 2D CAD data available
Configure nowStarting from∗ ： 969.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Block AP Type
NABEYA
A leveling block that can also be used sideways or upside down.
[Features]
· Can also be used sideways or upside down.
· An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
· Can also be used for the centering of workpieces when cutting or to prevent chattering.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 130.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block NU Type
NABEYA
[Features]
· Compensates for sloped installation surfaces with a spherical receiver plate.
· The spherical part has undergone precision processing with a contact ratio of 65% or higher.
· The spherical receiver plate and top plate are made of ductile cast iron that is hard to damage.
· Lifting amount (adjustment amount) is set to 10 mm, which is the highest in its class.
· Employs a thrust needle bearing and special washer to enable operation with a load of 100kN.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 405.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Blocks U Model
NABEYA
Compensates for sloped installation surfaces with a spherical receiver plate. Includes a horizontal deviation / vertical deviation preventing mechanism.
[Features]
· Compensates for sloped installation surfaces with a spherical receiver plate.
· The spherical part has undergone precision processing having with contact ratio of 70% or higher, enabling alignment to be performed easily. The displacement value in relation to the load is also very small.
· The product has a horizontal deviation / vertical deviation mechanism, is resistant to dynamic loads, and enables leveling to be performed quickly with a low level of torque.
· The thickness of each part is thick and can withstand abrupt loads.
· Can also be fixed using an anchor bolt.
· Ideal for vertical lathes, grinders, NC machine tools, various special devices, printing machines, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 382.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Foot Jack FJC Type (Heavy Load Type)
NABEYA
A type of casting base that can support heavy loads.
[Features]
· A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Foot Jack FJV Model
NABEYA
[Features] Inexpensive foot lifter. [Bolt material] SWRCH15R- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block, A Model
NABEYA
The standard leveling block.
[Features]
· Features good precision.
· Machinery installation costs are reduced.
· Features the best rigidity.
· Installation is easy.
· Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.- 2D CAD data available
Configure nowStarting from∗ ： 126.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block B Type
NABEYA
A low priced leveling block. Can be used together with an anchor bolt.
[Features]
· Can also be used sideways or upside down.
· An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
· Can also be used for the centering of workpieces when cutting or to prevent chattering.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 97.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block TU Type
NABEYA
A leveling block with a horizontal deviation / vertical deviation preventing mechanism. Can be used together with an anchor bolt.
[Features]
· The product feature a horizontal deviation / vertical deviation mechanism and is strong against dynamic loads, enabling level adjustments to be performed quickly with low levels of torque.
· The thickness of each part is thick and can withstand abrupt loads.
· Can also be fixed using an anchor bolt.
· Since a fine screw thread is used for the adjustment screw, fine adjustments are possible.
· The upper and lower surfaces and the sliding surface are not painted.
· Ideal for vertical lathes, grinders, NC machine tools, various special devices, printing machines, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 150.71 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Leveling Block, UJ Type (for Remote Operation)
NABEYA
[Features]
· Enables remote-controlled leveling by being installed under surface plates and various machinery where it is hard to reach.- 2D CAD data available
Configure nowStarting from∗ ： 310.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Foot Jack FJR Model (Rubber Type)
NABEYA
Since it includes rubber, floors are not damaged and slipping is prevented.
[Features]
· Since it includes rubber, floors are not damaged and slipping is prevented.
· A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
· The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.23 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Leveling Blocks AN Model
NABEYA
No flange. Can be installed in narrow places.
[Features]
· An A type without a flange that can be installed in narrow spaces.
· Convenient for installation on angle bases.
· Its functions, mechanism, and capacity are the same as the A type.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 169.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Block, C Type
NABEYA
A standard leveling block that can be used together with an anchor bolt.
[Features]
· Features good precision.
· Machinery installation costs are reduced.
· Can be fixed with an anchor bolt.
· Features the best rigidity.
· Installation is easy.
· Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 140.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block, L Type
NABEYA
A lightweight and compact leveling block with a low overall height.
[Features]
· The overall height is low and it is lightweight.
· Nitrile rubber is pasted to the top surface for slip prevention.
· L-2R has nitrile rubber coating on the bottom surface as well.
· The main body is an aluminum forged item and lightweight.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 317.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Level Jack
NABEYA
A level jack that can be used for various applications.
[Features]
· The main body is durable thanks to the use of FC250 tough cast iron.
· Operation load is 2TON- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 90.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Anchor Fixing D-E II /D-E II-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 7.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V
DAIWARASHI
[Features]
· It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
· A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
· Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 10.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 20.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A
DAIWARASHI
A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 14.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Slopes D-U-A
DAIWARASHI
A standard type adjuster for slopes in which the screw shaft part tilts even more.
[Features]
The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 16.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Slopes, for Anchor Fixing D-U-E II
DAIWARASHI
An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 13.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Heavy Weights D-C / D-C / S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 6.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Heavy Weights with Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 9.19 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 71.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Heavy Weights (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 43.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 17.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Nominal M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKIGEN | IWATA MFG | WOOJIN | IMAO CORPORATION | IMAO CORPORATION | TRUSCO NAKAYAMA | MISUMI | NANSIN | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product Series | Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK) | Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V | Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A | Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R | Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| Starting from∗ | 4.20 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 36.97 € *Unit price with basic configuration | 3.24 € *Unit price with basic configuration Volume Discount | 8.29 € *Unit price with basic configuration Volume Discount | 3.71 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 10.85 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.89 € *Unit price with basic configuration Volume Discount | 7.80 € *Unit price with basic configuration Volume Discount | 28.77 € *Unit price with basic configuration Volume Discount | 60.01 € *Unit price with basic configuration | 7.53 € *Unit price with basic configuration | 6.88 € *Unit price with basic configuration Volume Discount | 28.73 € *Unit price with basic configuration | 39.96 € *Unit price with basic configuration | 7.45 € *Unit price with basic configuration Volume Discount | 39.88 € *Unit price with basic configuration | 9.38 € *Unit price with basic configuration Volume Discount | 61.02 € *Unit price with basic configuration | 144.13 € *Unit price with basic configuration | 969.03 € *Unit price with basic configuration | 130.55 € *Unit price with basic configuration Volume Discount | 405.84 € *Unit price with basic configuration Volume Discount | 382.82 € *Unit price with basic configuration | 11.58 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 5.14 € *Unit price with basic configuration | 126.49 € *Unit price with basic configuration | 97.07 € *Unit price with basic configuration Volume Discount | 150.71 € *Unit price with basic configuration | 310.20 € *Unit price with basic configuration | 8.23 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 169.60 € *Unit price with basic configuration Volume Discount | 140.62 € *Unit price with basic configuration Volume Discount | 317.01 € *Unit price with basic configuration Volume Discount | 90.02 € *Unit price with basic configuration Volume Discount | 7.12 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 10.03 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 20.90 € *Unit price with basic configuration Volume Discount | 14.95 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 16.98 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 13.08 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 6.98 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 9.19 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 71.86 € *Unit price with basic configuration Volume Discount | 43.81 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 17.04 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount |
| Min. Shipping Days | Same day | 10 Days | 5 Days | 6 Days | Same day | Same day | Same day | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 5 Days | 6 Days | 5 Days | 6 Days | 6 Days | Same day | 5 Days | 5 Days | 5 Days | 7 Days | 10 Days | Same day | 6 Days | 5 Days | 6 Days | 5 Days | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Others | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Others | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Adjusting Bolt Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type |
| Adjusting Bolt Shape Type | With Rubber Foot | Standard | With Rubber Foot | Standard | - | Anchor Bolt Fixing Type | - | With Rubber Foot | Anchor Bolt Fixing Type | With Rubber Foot | - | Standard / With Rubber Foot | Standard / With Rubber Foot | Anchor Bolt Fixing Type | Standard / With Rubber Foot | Standard / With Rubber Foot | Standard / With Rubber Foot | Anchor Bolt Fixing Type | - | - | - | - | - | Standard | Standard | - | - | - | - | With Rubber Foot | - | - | - | Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard | With Rubber Foot | Built-in Bearing | Built-in Bearing | Standard |
| Swivel Angle θ(deg) | - | 20 | - | - | - | - | - | - | 30 | 30 | - | 30 | 30 | 4 ～ 30 | 30 | 16 ～ 30 | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | 35 | - | - | - | - | - |
| Mounting Shape Type | - | - | - | Metal Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Not Provided | Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided | - | - | - | - | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Material | Steel | - | Steel | Stainless Steel / Steel | - | Stainless Steel / Steel | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | - | - | - | - | Stainless Steel | Steel | - | - | - | - | Stainless Steel | - | - | - | - | Stainless Steel / Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel |
| Thread Surface Treatment | Zinc Plating | Black Oxide | Zinc Plating | Zinc Plating / Others | - | Not Provided | Trivalent Chromate | - | Zinc Plating | Zinc Plating | - | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Not Provided | - | - | - | - | - | Trivalent Chromate | Chromate Plating | - | - | - | - | Not Provided / Bright Chrome Plating | - | - | - | - | Trivalent Chromate / Others | Bright Chrome Plating | Trivalent Chromate | Others | Bright Chrome Plating | Bright Chrome Plating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Body Material | Polyamide | Steel | Polyamide | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Steel | Steel | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Cast Iron | - | Steel | - | Cast Iron | - | Stainless Steel | Steel | - | - | - | - | Stainless Steel | - | - | Others | - | Steel | Steel | Steel | - | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel / Steel | Stainless Steel / Cast Iron |
| Main Body Surface Treatment | Not Provided | Black Oxide | Not Provided | Zinc Plating / Others | Zinc Plating | Not Provided | Trivalent Chromate | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Black Oxide | - | - | - | Trivalent Chromate | Chromate Plating | - | - | - | - | Not Provided / Bright Chrome Plating | - | - | - | - | Trivalent Chromate / Others | Bright Chrome Plating | Trivalent Chromate | Others | Bright Chrome Plating | Bright Chrome Plating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Bottom Rubber Material | Urethane | - | Others | - | - | - | - | Synthetic Rubber | Nitrile Rubber | Nitrile Rubber | - | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nitrile Rubber | - | - | - | - | - | - | - | - | Chloroprene Rubber | Chloroprene Rubber | - | - |
| Thread Length L1(mm) | 24 ～ 34 | 58 ～ 66 | 40 | 50 ～ 200 | - | 125 ～ 210 | 75 ～ 150 | 50 ～ 170 | 98 ～ 198 | 78 | - | 43 ～ 168 | 98 ～ 198 | 95 ～ 198 | 43 ～ 168 | 98 ～ 198 | 43 ～ 198 | 71 ～ 114 | - | - | - | - | - | 75 ～ 180 | 40 ～ 75 | - | - | - | - | 50 ～ 180 | - | - | - | - | 50 ～ 200 | 65 | 130 ～ 150 | 100 ～ 150 | 180 | 100 ～ 150 | 50 ～ 200 | 50 ～ 200 | 150 | 100 ～ 200 | 200 ～ 300 |
| Main Body Height h(mm) | 23 ～ 54 | 75 ～ 90 | 63 | 75 ～ 230 | - | - | 6 | 20 ～ 25 | 24 | 19 | 14 | 12 | 24 | 45 ～ 46 | 17 | 45 ～ 46 | 24 | 100 ～ 153 | 65.5 ～ 93.5 | 63 ～ 190 | 50 | 78 ～ 110 | 70.5 ～ 101.5 | 17 ～ 21 | 16 | 66 ～ 101 | 48.5 ～ 71 | 65.5 | 95 ～ 165 | 12 ～ 23 | 80 ～ 101 | 66 ～ 105 | 32.5 ～ 35.5 | 100 ～ 160 | 17 ～ 19 | 17 | 19 | 15 ～ 18 | 18 | 17 | 17 | 22 | 37 | 29.5 ～ 36.5 | 17 ～ 22 |
| Thread Nominal M(mm) | 8 ～ 10 | 10 ～ 20 | 8 | 12 ～ 20 | - | 12 ～ 20 | 16 | 8 ～ 20 | 20 ～ 24 | 16 | - | 8 ～ 16 | 20 ～ 24 | 20 ～ 30 | 8 ～ 16 | 20 ～ 30 | 8 ～ 24 | 28 ～ 45 | - | - | - | - | - | 16 ～ 20 | 16 | - | - | - | - | 8 ～ 16 | - | - | - | - | 12 ～ 20 | 16 | 16 | 12 ～ 16 | 20 | 12 | 12 ～ 20 | 12 ～ 20 | 24 | 20 ～ 30 | 12 ～ 24 |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Swivel Mechanism | Not Provided | Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Provided | Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided | - | - | - | - | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Leg End
- Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 11.5
- 11.6
- 13.5
- 14
- 15
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 38.5
- 39.5
- 40
- 41
- 43
- 43.5
- 45
- 45.5
- 47
- 48.5
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 53
- 54
- 55
- 56
- 58
- 58.5
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 65
- 65.5
- 66
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 95
- 95.5
- 97
- 98
- 99
- 99.5
- 100
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Main Body Height h(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 107
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
Thread Nominal M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Brand
-
- NABEYA (23)
- DAIWARASHI (19)
- IMAO CORPORATION (19)
- TAKIGEN (15)
- ELESA (5)
- TRUSCO NAKAYAMA (5)
- WAKISANGYO (4)
- KURASHIKI KAKO (3)
- NABEYA BI-TECH (3)
- RICH ENGINEERIN (3)
- GIFU SANKEN KOGYO (2)
- OHNORUBBER (2)
- WOOJIN (2)
- SHIMIZU (2)
- 999SHIMANO (1)
- IWATA MFG (1)
- NANSIN (1)
- SUNCO (1)
- SUN FASTENER (1)
- YAHATA NEJI (1)
- ESCO (0)
- EUROFLEX (0)
- MAEDLER (0)
- AMF (0)
- GANTER (0)
- KIPP (0)
- NORELEM (0)
- HALDER (0)
CAD data type
-
- 2D
- 3D
Categories related to Adjuster
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.