Adjuster（Page 2）

?* Information on days to ship and prices

• 

  Level Adjuster (Anchor Type) (KAF)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6465 Precision wedge block

  AMF

  Precision wedge block Centring hole 12 mm. Case-hardened steel and fine-machined wedge surfaces. A spherical attachment no. 6440 is included with every precision whipstock. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,482.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  LS.A-SST - Levelling elements -Technopolymer base stainless steel stem

  ELESA

  Levelling feet with base in black glass fibre reinforced polyamide-based technopolymer, stem with threaded AISI 304 stainless steel joint with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.A-SST-ESD-C - Levelling elements -ESD conductive technopolymer base stainless steel stem

  ELESA

  Levelling elements with base in black special conductive glass fibre reinforced polyamide-based technopolymer, threaded polished AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The bases are suitable for "ESD PROTECTED AREA" (EPA) where components, which are susceptible to electrostatic discharges, are handled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swivel feet steel, Form B (K0742)

  KIPP

  · High load swivel feet
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Any plate can be combined with any threaded spindle or ball joint
  
  · Anti-slip plates absorb vibrations and prevent the swivel foot slipping

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Riser block short version, form H, with tapped holes (01247)

  NORELEM

  · Base element for system construction
  
  · with tapped bushes
  
  · Grid spacing 50 mm
  
  · Ground support and clamping faces
  
  · Compatible with basic elements with grid holes

  Select to compare

  Configure now
  Starting from∗ ：	191.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Leveling Mount Space Saving Type (Medium Duty)

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  High Mount TYPE LM

  KURASHIKI KAKO

  [Features]
  · Demonstrates high vibration-proofing performance with a compact body.
  · An LM type handle that also facilitates level adjustments.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA70, LVAR70)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Leveler Bolt FPS

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FPK Type

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Block T-Type

  NABEYA

  Includes a horizontal deviation / vertical deviation preventing mechanism.
  
  [Features]
  · The parts are precisely processed to have parallelism, so precise fine adjustments can be made.
  · The overall height is made as low as possible to provide outstanding stability.
  · The product features a horizontal deviation / vertical deviation mechanism and displacement with regards to dynamic loads is minimal.
  · Can also be fixed using an anchor bolt.
  · Ideal for five-face machining devices, large grinding machines, various dedicated machinery, large printing machines, measurement machinery, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	300.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Anti-Vibration Wedge Mount, PKD (Bolt Through Type)

  NABEYA

  [Features]
  · A type for fixing machinery and bases.
  · A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	359.53 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Foot Jack FJV Model

  NABEYA

  [Features] Inexpensive foot lifter. [Bolt material] SWRCH15R

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights D-C / D-C / S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Adjuster KC-24-3

  TAKIGEN

  Height adjustment can be easily performed just by pushing a button. After fixing, fine adjustments are possible by rotating the leg portion.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Adjuster KC-1275-B

  TAKIGEN

  Stainless steel with superior corrosion resistance. For heavy loads.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Adjusting Leg K-1794

  TAKIGEN

  Outstanding durability

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Level Adjuster KC-275-A

  TAKIGEN

  Suitable for machine tools and vending machines.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Level Adjuster (KA)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling Feet with Vibration Damping Element / GN 148 / with two-hole flange, with four-bolt flange

  GANTER

  Levelling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (Type 2) protects the levelling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.A-ESD-C - Levelling elements -ESD conductive technopolymer base steel stem

  ELESA

  Levelling elements with base in black special conductive glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The bases are suitable for "ESD PROTECTED AREA" (EPA) where components, which are susceptible to electrostatic discharges, are handled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet with vibration damping element / Natural rubber / Zinc plated / M10-M20 / GN 148

  GANTER

  [Specifications]
  ・Material: Natural rubber
  ・Surface treatment: Zinc plated
  ・Threaded insert: Steel, Zinc plated
  ・Thread d2: M10-M20
  ・Type: with two-hole flange, with four-bolt flangeI
  ・dentification no.: without tear-off lock, with tear-off lock
  ・Hardness: soft, hard
  
  Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (identification no. 2) protects the leveling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling feet rubber underlay, vulcanized

  GANTER

  [Specifications]
  ・Material: Stainless Steel
  ・Color: Black
  ・Thread d2: M6-M10
  ・Length l: 30-70
  ・Hardness: Hardness Shore A
  
  Leveling feet GN 439 / GN 439.5 are used for installing smaller machines, systems or devices.
  Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface damage. They are also designed such that the threaded spindle can absorb compressive forces. This is necessary because the retaining washer is not evenly supported during leveling.
  Thanks to the stable rivet connection between the threaded spindle and the retaining washer, the introduced forces can be reliably transmitted to the rubber underlay.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form D (K0739)

  KIPP

  [Specifications]
  ・Main material: Stainless steel, Steel
  ・H=Height(mm): 22
  
  [Features]
  ・Components for assembling a swivel foot
  ・Application sectors: machine and equipment construction, logistics and assembly
  ・Rubber pad dampen structural sound
  ・Suitable nuts included
  ・Material: Foot plate and threaded spindle, steel or stainless steel
  ・K0739_D Series

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form A and B (K0395)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet without hole (27798)

  NORELEM

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The rotatable threaded spindle is pressed into the foot plate
  
  · Various versions

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form D (27790)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	16.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form C (27790)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	13.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form G (07144)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  Select to compare

  Configure now
  Starting from∗ ：	25.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling Pads 2259, Type A

  MAEDLER

  Material Type A: Ball bearing: free cutting steel, induction hardened, black oxide finish.
  Pad: steel, heat-treated, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Levellers with Lock Nut MN 686.2, Standard

  MAEDLER

  Material:
  Standard Version: 42CrMo4V, Nr. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Larger overall height with more adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Levellers with Lock Nut MN 686.2, Stainless Steel

  MAEDLER

  Material:
  Stainless version: Stainless steel 1.4301 (AISI 304).
  • For parallel surfaces.
  • Larger overall height with more adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	63.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Adjusters MN 686.3, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Low overall height with short adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Ball Head Precision Adjusters MN 686.4, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For non-parallel surfaces up to 4º slope.
  • Low overall height with short adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Ball Head Precision Adjuster MN 686.9, Stainless Steel

  MAEDLER

  Material:
  Stainless version: Stainless steel 1.4301 (AISI 304).
  • For non-parallel surfaces up to 4° slope.
  • Larger overall height with more adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	72.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Table-Top Bases

  MISUMI

  [Features] Recycling type that allows you to separate the threaded part and the backing for disposal.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tabletop Leveling Mounts / Grip Type

  MISUMI

  [Features] Less slippery than conventional products, also available with swivel function.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Leveling Mount / Rotary

  MISUMI

  One levelling bracket, rotatable. [Material]EN 1.0038 Equiv. with surface treatment options: trivalent chromate.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Snap Foot for Light Loads (SLG14, FLG14)

  IMAO CORPORATION

  A snap-lock type foot for light loads whose leg can be folded. A rubber pad that is strong against abrasion is used for the surface that comes in contact with the ground.
  
  [Features]
  · A snap-lock type foot for light loads whose leg can be folded.
  · Please use by mounting to the bottom of equipment.
  · Operation and checking of the display is made easy by tilting the panel surface.
  · A rubber pad that is strong against abrasion is used for the surface that comes in contact with the ground.
  · Please use as a pair with the FLG-14 floor foot.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA50, LSAR50)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FAJK Model

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Jack

  NABEYA

  A leveling jack with a large adjustment stroke and outstanding strength.
  
  [Features]
  · The adjustment stroke is large and can be used where ground subsidence is extreme.
  · Can be fixed with an anchor bolt.
  · An FCD550 ductile base is used and has outstanding strength.
  · A spherical receiver head that makes precise adjustments smooth.
  · Displacement value in relation to load is small (0.03 at 50kN)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	212.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Anti-Vibration Wedge Mount PKDK (Bolt Through Type with A Spherical Surface)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function. Comes with a spherical sheet enabling the slope between the machine and base can be corrected. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	482.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...