Data Measurement Equipment（Page 12）

?* Information on days to ship and prices

• 

  PROFINET I/F Unit for EJ Counter

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.
  Multipoint measuring systems with a maximum of 16 gauges can be configured.
  The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.
  In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.
  Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).
  Input voltage: 10-27V DC supplied from EJ-Counter
  Maximum power consumption: Single EJ Counter: 3W or less
  Maximum consolidation: 30W or less
  Data Transfered : Current value data (No Unit, signed 32 bit data), Tolerance judgment result.

  Select to compare

  Configure now
  Starting from∗ ：	1,041.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressure Spindle

  MITUTOYO

  Pressure spindle for toggle clamp

  Select to compare

  Configure now
  Starting from∗ ：	7.11 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Positioning Pin

  MITUTOYO

  Positioning bushing 12.5 mm multiflex-profile
  For the stabilization of buil-up components on the 50 mm grid of the profile.

  Select to compare

  Configure now
  Starting from∗ ：	9.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pin Spanner Stainless Steel

  MITUTOYO

  For the tightening and untightening styli.

  Select to compare

  Configure now
  Starting from∗ ：	10.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Overlay Chart Set

  MITUTOYO

  Versatile set of 12 overlay charts.

  Select to compare

  Configure now
  Starting from∗ ：	1,126.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Overlay Chart for Meas Projector

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	100.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multi-way Stylus M5 Ruby Ball, Carbide Stem

  MITUTOYO

  In order to reach multiple planes without stylus change, multi-tipped star styli can be used.

  Select to compare

  Configure now
  Starting from∗ ：	530.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Multi-way Stylus Holder M5, Aluminium

  MITUTOYO

  Multiway stylus holders facilitate the flexible configuration of star styli.

  Select to compare

  Configure now
  Starting from∗ ：	693.42 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Multiplexer Mux-10F

  MITUTOYO

  The MUX-10F 4 channel D-SUB9 serial interface is a microcontrolled interface that connects four measurement devices, with Digimatic output, to the RS-232C serial port of a computer.

  Select to compare

  Configure now
  Starting from∗ ：	1,035.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multiflex-profile Frame

  MITUTOYO

  The multiflexprofile frames with their rigid construction, provide a solid frame base for large workpieces that need to be measured.
  They feature two significant characteristics of the multiflex profile series for flexible fixturing application:
  Dovetail profile Flexible repositioning with slider elements for rapid and cost effective changes of fixture points.
  T-nut profile Additions can de added and freely positioned in the t-nut profile Can be combined with all kinds of profiles and add-on parts, even from third parties.
  multiflexprofile frames are compatible with the Mitutoyo multiflexprofile and are ideal for combining with the vari-fix clamping columns.

  Select to compare

  Configure now
  Starting from∗ ：	92.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multiflex-profile

  MITUTOYO

  The multiflexprofile series from Mitutoyo combines in one profile the advantages of three different kinds of profiles for modular fixture construction.
  Dovetail profile Flexible repositioning with slider elements for rapid and cost effective changes of fixture points.
  Grid profile Benefit from a fixed 50mm positioning grid for the reproducible addition of features.
  T-nut profile Additions can de added and freely positioned in the t-nut profile Can be combined with all kinds of profiles and add-on parts, even from third parties.
  multiflexprofile are compatible with the Mitutoyo multiflexprofile frames and are ideal for combining with the vari-fix clamping columns.

  Select to compare

  Configure now
  Starting from∗ ：	169.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mounting Bracket for Multiflex Profile

  MITUTOYO

  Mounting bracket for multiflex-profile
  For mounting multiflex profiles on the measuring table.

  Select to compare

  Configure now
  Starting from∗ ：	166.97 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Magnetic Support

  MITUTOYO

  The magnetic receiver component os used for quick and easy clamping of workpieces. Component M6 thread

  Select to compare

  Configure now
  Starting from∗ ：	52.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  M2-2D Software for PJ and PH Series

  MITUTOYO

  Support for Clean, Intuitive DesignThe user interface design of the M2 software means you’ll spend more time measuring and less time reading manuals. By combining a familiar user experience with current touch screen conventions, the M2 software can quickly be integrated into your process and be accessible to a wide range of users.Designed for Multi-Touch software controlIn addition to the conventional mouse interface, expanded Multi-Touch logic allows for versatile pan and zoom of the active part view. Increase the efficiency of feature construction, feature data manipulation, and reporting tasks with a simple pinch zoom, swipe pan, or double click.Graphics-based “Part View” constructionsGenerate popular construction types, like Distances and Tangent Lines, from within the graphical part view itself. Constructions with multiple sub-types can be toggled quickly with the change feature type command. Supported construction types include:
  Average Intersections Tangent Line(s)
  Angle Compliments Offset Skew Lines Mid/Center Point(s)
  Shortest DistanceGage Circle(s)
  Perpendicular/Parallel Line(s)
  End Point(s)
  Farthest DistanceBolt Circle

  Select to compare

  Configure now
  Starting from∗ ：	2,622.50 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  M2-2D Soft and Hardware for PV5110

  MITUTOYO

  Quick and easy measuring, with the innovative M2 software.
  Spend more time measuring and less time reading manuals thanks to the M2 software’s straightforward and easy to operate user interface. Thanks to the familiar use of a touch screen, the M2 software can be quickly integrated into your process and drastically improve work efficiency.
  - The M2 software interface is available for use in both portrait and landscape mode, providing maximum flexibility for the display or mounting device of your choosing.
  - Gain access to many powerful features and an intuitive measuring interface whether you are using an optical edge equipped system or an externally generated crosshair device. Precise optical edge detection mechanisms provide accurate results as well as access to powerful, industrial grade, measurement functionality.

  Select to compare

  Configure now
  Starting from∗ ：	4,320.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  M2 – Geometric Measuring Software

  MITUTOYO

  Quick and easy measuring, with the innovative M2 software. Spend more time measuring and less time reading manuals thanks to the M2 software’s straightforward and easy to operate user interface. the M2 software can be quickly integrated into your process and drastically improve work efficiency. The M2 software interface is available for use in both portrait and landscape mode, providing maximum flexibility for the display or mounting device of your choosing. Gain access to many powerful features and an intuitive measuring interface whether you are using an optical edge equipped system or an externally generated crosshair device. Precise optical edge detection mechanisms provide accurate results as well as access to powerful, industrial grade, measurement functionality.

  Select to compare

  Configure now
  Starting from∗ ：	2,127.50 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Lower Part, Adjustable Receiver Bushing

  MITUTOYO

  Lower section of Adjustable receiver pin.

  Select to compare

  Configure now
  Starting from∗ ：	46.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Location Pin

  MITUTOYO

  eco-fix location pin, For the adjustment of the required height level of the fixture.

  Select to compare

  Configure now
  Starting from∗ ：	17.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Loading Receiver Pallet

  MITUTOYO

  Repositiong receiver plate with repositioning receivers for 250mm and 500mm base plates. Achieve easy and precise repositioning and enhance your semi-automatic serial CMM measurement process by using the pallet receiver system plate with its 3 point repositioning system. Results in a significatly higher measurement throughput.

  Select to compare

  Configure now
  Starting from∗ ：	1,403.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leaf Spring

  MITUTOYO

  eco-fix/eco-fixplus spring for the exchange of springs in the spring clips

  Select to compare

  Configure now
  Starting from∗ ：	5.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Knurled Clamp Ring for Stem

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	6.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Knuckle/Swivel Joint M2, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	89.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Knuckle Joint M3, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	81.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Knuckle Joint M2, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	81.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Keyboard Interface DMX-3T/FS2 USB

  MITUTOYO

  The DMX-3 T/FS2 USB is a keyboard interface that transmits measurement data from measuring instruments equipped with Digimatic interfaces to a PC. Measurement data is converted into keyboard codes, allowing you to easily access it with any program working with keyboard entries, regardless of the operating system. The USB and data conversation interfaces also allow you to directly input the measurement data into a spreadsheet.

  Select to compare

  Configure now
  Starting from∗ ：	760.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mounting Plate for Module Assembly

  MITUTOYO

  Build-up plate
  For the connection of build-up modules on multiflex profiles and base plates
  Can also be used as an alternative to cylindrical build-up columns on the base plate.

  Select to compare

  Configure now
  Starting from∗ ：	156.32 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Joint M5, Titanium

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	84.08 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Joint M5, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	53.88 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Joint M4, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	53.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Joint M2, Stainless Steel

  MITUTOYO

  Adjustable stylus joints are used to set up styli for special tasks, for e.g. the measurement in angled bores.

  Select to compare

  Configure now
  Starting from∗ ：	69.87 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Joint Eco-fix (Dial/Gage Connector)

  MITUTOYO

  Joint for connecting dial gauges and indicators

  Select to compare

  Configure now
  Starting from∗ ：	194.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holding Bar for Swivel Clamp

  MITUTOYO

  Mitutoyo Holding Bar

  Select to compare

  Configure now
  Starting from∗ ：	20.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Headless Screw

  MITUTOYO

  For the connection of threaded components

  Select to compare

  Configure now
  Starting from∗ ：	5.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot Element

  MITUTOYO

  Foot component for multiflex-profile
  To be used as a foot element on profile frames.

  Select to compare

  Configure now
  Starting from∗ ：	114.87 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Flexible Jointed Arm

  MITUTOYO

  Mechanical clamping

  Select to compare

  Configure now
  Starting from∗ ：	247.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Top Insert

  MITUTOYO

  Flat top insert for direct workpiece support.

  Select to compare

  Configure now
  Starting from∗ ：	14.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture ID Software Package

  MITUTOYO

  FixtureID kit for automatic part and fi xture recognition
  Reliable transmission of part and fi xture data to the IT environment.

  Select to compare

  Configure now
  Starting from∗ ：	3,424.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixing plate for MRS-400

  MITUTOYO

  Fixing plate for MRS rack

  Select to compare

  Configure now
  Starting from∗ ：	355.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Fastening Element for Toggle Clamps

  MITUTOYO

  Fastening element for connecting the toggle clamps and receiving prisms.

  Select to compare

  Configure now
  Starting from∗ ：	59.21 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Extension Set Turn-swivel Joints

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	416.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension Set Straight pin

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	26.05 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Extension Set Receiver Brackets

  MITUTOYO

  Receiver bracket extension set. Reach any build up positions within the grid positionsof the base plates. Made of hard-anodised aluminium for best scratch and wear resistance.

  Select to compare

  Configure now
  Starting from∗ ：	269.74 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Extension Set Positioning Comp

  MITUTOYO

  Support elements extension set. Define the receiving positions of components.

  Select to compare

  Configure now
  Starting from∗ ：	293.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension Set Magnetic Receivers

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	198.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension Set Location Pins

  MITUTOYO

  Location pin extension set. For the implementation of the required height level of the component receiver. Made of hard-anodised aluminium for best scratch and wear resistance.

  Select to compare

  Configure now
  Starting from∗ ：	551.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...